Search
1495 articles for “work”
-
Short Review on Nanofluidics with the Experimental Demonstration on Microfluidic Capillary Flow inside Microchannel Bends
Abstract: In this research work, author has presented a short review on nanofluidics. Total three individual microchannel bends as microfluidic devices are designed, fabricated and tested in this experimental work using author’s own hands-on completely. Polymethylmethacrylate (PMMA) is the selected polymeric material to fabricate these microfluidic devices. Dyed water is prepared as working liquid to test these microfluidic devices. According to this experimental study, the surface-driven microfluidic flow of dyed water …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 1, 2020 · pp. 16–22 Read article
-
Passive Capillary Flow of Dyed Ethanol for Nanofluidics
Abstract: In this experimental work, a single polymethylmethacrylate (PMMA) microchannel bend as microfluidic device is fabricated by maskless lithography, hot embossing lithography and direct bonding technique. Dyed ethanol is prepared and used as working liquid in this work. A CMOS camera is used to capture the surface-driven capillary flow of dyed ethanol in the fabricated PMMA microchannel bend. In future, this experimental work may be useful to establish the nanofluidic flow …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 1, 2021 · pp. 18–23 Read article
-
Machine Learning Bouc-Wen Model for Nano- positioning System
Abstract: Most of the application in present world has taken ‘Nano’ as a part of their near future implementation. In Nano-Positioning System (NPS) the mechanical dynamics are handled at Nano scale. Designing a precisioned NPS is a greater challenge. To have a better hysteresis and better behaviour (Static/Dynamic) the Bouc-Wen model is modified by linearizing. In this work SISO (Sıngle-input Sıngle-Output) and MIMO (Multiple-Input Multiple-Output) models of NPS are designed. In …
Published in International Journal of Applied Nanotechnology · Vol. 9, Issue 1, 2023 · pp. 14–25 Read article
-
A Review on Superhydrophobic Coating for Personal Protective Equipment in Coronavirus (Covid-19) Pandemic
Abstract: Novel coronavirus (COVID-19) infection caused by a newly acquired coronavirus. We have entered the global epidemic. It is important to maintain physical distance to prevent the spread of coronavirus among humans. However, health care workers and other paramedics worked 24 X 7 to rescue patients. While operating, the use of protective equipment is required. The use of protective equipment such as face masks, gloves and aprons is essential to prevent …
Published in International journal of Nanobiotechnology · Vol. 7, Issue 2, 2021 · pp. 10–18 Read article
-
Experiments on the Passive Capillary Flow of Aqueous Ethanol in Sudden Expansion Microchannels towards the Applications in Nanofluidics and Nanoelectromechanical Systems
Abstract: In this work, total three individual sudden expansion microchannels are designed and fabricated by maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory. Polymethylmethacrylate (PMMA) is used as the selected polymer to fabricate these microchannels. Aqueous ethanol (15% ethanol, 85% dyed water) is prepared and used as dyed working liquid. Surface-driven (passive) capillary flow of prepared working liquid is recorded by a CMOS camera corresponding to …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 15–22 Read article
-
Experimental Demonstration on Polymer based Microfluidics
Abstract: In this experimental work, a single polymer based gradual expansion microchannel is designed. This microchannel is fabricated by the maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory. Dyed water is the prepared working liquid in this work. The surface-driven (passive) microfluidic flow of dyed water is recorded in the fabricated device using a CMOS camera catching 25 frames per second with a corresponding time-scale resolution …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 23–26 Read article
-
Remotely Operated Underwater Vehicle (ROV): State of the Art
Abstract: This study focuses on the analysis and development of Remotely Operated Underwater Vehicles (ROVs), encompassing their modeling, design, and control systems. It also addresses the inherent challenges related to their structural limitations, durability, and ease of operation. ROVs are robotic systems that can perform tasks in hazardous offshore environments and are equipped with various sensors to collect data. The objective of this paper is to examine the development of various …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 1, 2023 · pp. 24–28 Read article
-
Surface Roughness Analysis on the Vegetable Oil Based Cutting Fluid in Turning of EN8 Steel
Abstract: In the present work, properties of the present work of the non-ionic surfactants have been recognized to formulate vegetable oil based cutting fluid (VBCF) palm oil for the emulsion as non-conventional lubricant. Surface finish is an important indicator of quality in manufacturing industries and thus it is regarded as one of the most important parameter to be considered. In this present work different machining parameters were taken and their effect …
Published in International Journal of Manufacturing and Materials Processing · Vol. 3, Issue 1, 2017 · pp. 1–8 Read article
-
Review Paper on Thermal Analysis of Non-Vented (solid) Disc Brake using Ansys Software
Abstract: The disc brakes are exposed to large thermal stresses and heat during routine braking. The extraordinary thermal stresses, tremendous heat occurred in the disc during hard braking. The aim of the project or research work is to design and analysis of disc. The modelling or design of the disc is done using solid works software. The Thermal analysis is to be done on the Non-vented disc brakes using ANSYS software …
Published in International Journal of Computer Aided Manufacturing · Vol. 1, Issue 1, 2016 · pp. 01–06 Read article
-
Analytical Modeling of Brick–Mortar Couplet
Abstract: This paper is a presentation of the finite element modeling of stress in a brick–mortar couplet. The brick–mortar couplet here serves as a meaningful substitute for a brick wall structure. In this work, the basic steps in derivation of the element stiffness matrix for a plane stress problem using the displacement approach are presented. The main purpose in the work is to verify the nodal displacements, which in turn would …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 5–13 Read article
-
A Review on Cutting Parameter on Micro Drilling Characteristics of Different Steel
Abstract: Related work revealed that a lot of works have been done on the cryogenic turning of various metals. The tool life significantly increases with the introduction of cryogenic and thermal-assisted machining in the turning operations. The reductions in the heat at tool chip interface have significantly affected on the tooled life. Some research gaps in the literature have been found as: Limited research works have been performed on the cryogenic …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 1, 2021 · pp. 31–36 Read article
-
Exploring the Current Practices of Nurses, Preparing and Administering Chemotherapeutic Drugs to Children
Abstract: Introduction: Emergence of chemotherapeutic drugs has immensely benefitted current prognosis of childhood cancers but unintentional exposure to harmful agents may endanger life of health care workers who repeatedly get exposed to cytotoxic drugs. Nurses’ safety can be ensured with evidence based standard protocols related to chemotherapeutic drug preparation and administration, use of PPE, proper handling of hazardous waste, spill management etc. Objective: To explore ongoing practices, casual daily routine activities, …
Published in International Journal of Nursing Critical Care · Vol. 6, Issue 2, 2020 · pp. 52–59 Read article
-
Experimental Investigation of FSW on Al 6061-T6 MG Dissimilar Joints
Abstract: Friction Stir Welding (FSW) is a solid-state joining technique that has shown significant potential for welding dissimilar materials, such as aluminum and magnesium alloys, which are difficult to join using conventional fusion welding methods due to large differences in their physical, thermal, and metallurgical properties. During FSW, contact between the rotating, wear-resistant tool shoulder, the pin, and the work piece produces frictional energy. Additional thermal energy develops because of intense …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Sustaining Artisan Livelihoods through Community Cooperative Housing: A Socio-Spatial Study of the Kumbhar Community in Pune, India
Abstract: This research addresses the problem in contemporary community housing. Housing is delivered as a physical product, while the social, economic, and cultural systems that sustain community life are largely ignored. In the resettlement of the Kumbhar (potter) Community in Pune, equal land was allotted without cohesive architectural planning, which has led to fragmented spatial organisation, underutilised work areas, conflicts over resources, unclear boundaries, and a decline in economic efficiency due …
Published in International Journal of Housing and Human Settlement Planning · Vol. 12, Issue 2, 2026 Read article
-
A Study to Assess the Effectiveness of Structured Teaching Program on Knowledge Regarding Prevention of Varicose Veins Among Staff Nurses at Selected Hospital in Kanpur
Abstract: Varicose veins are a common occupational health problem associated with prolonged standing and impaired venous circulation, particularly among healthcare professionals such as staff nurses. If preventive measures are not adopted in a timely manner, varicose veins can progress to serious complications affecting quality of life and work efficiency. Nurses working in hospital settings are at increased risk due to long working hours, extended periods of standing, and high physical demands. …
Published in International Journal of Medical Surgical Nursing · Vol. 9, Issue 1, 2026 · pp. 34–59 Read article
-
Comprehensive Review and Analysis of Gas Turbine Power Plant Performance: Impact of Operating Conditions, Ambient Temperature, and Cycle Configurations
Abstract: This study presents a comprehensive review of gas turbine (GT) power plants, focusing on simple and complex cycles. The review examines the influence of operating conditions, ambient temperature, and cycle configurations on GT performance. Turbine work and thermal efficiency decrease with increasing ambient temperature. Thermal efficiency increases linearly with compression ratio, but decreases with ambient temperature. Specific fuel consumption (SFC) increases with ambient temperature and lower turbine inlet temperature. Compression …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 12, Issue 1, 2026 · pp. 16–28 Read article
-
An Integrated Computer-Aided Approach for Fixture Design and Assembly
Abstract: Fixtures play a crucial role in ensuring dimensional accuracy, productivity, and repeatability in modern manufacturing systems. With the increasing adoption of flexible and computer-integrated manufacturing, there is a growing need for systematic and automated fixture design methodologies. This work presents a computer-aided fixture design and assembly approach that integrates CAD-based modeling, modular fixturing concepts, and virtual assembly techniques. The proposed methodology covers the complete fixture development cycle, including workpiece analysis, …
Published in International Journal of Computer Aided Manufacturing · Vol. 12, Issue 1, 2026 · pp. 24–39 Read article
-
Digital Twin-Enabled Structural Health Monitoring Framework for Real-Time Damage Detection in Civil Infrastructure
Abstract: Abstract The paper discusses how Digital Twin-enabled Structural Health Monitoring (SHM) restyles civil infrastructure by finding damage in real time, decreasing costs, and increasing safety levels. As opposed to the traditional inspection methods, Digital Twins apply virtual models and sensors to observe structures like bridges, dams, and buildings immediately, which reduces the repair costs by 30–50% and extends the project’s lifespan by 20–30%. This research studies four real-world projects, namely, …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 Read article
-
Digital Twin-Enabled Structural Health Monitoring Framework for Real-Time Damage Detection in Civil Infrastructure
Abstract: Abstract The paper discusses how Digital Twin-enabled Structural Health Monitoring (SHM) restyles civil infrastructure by finding damage in real time, decreasing costs, and increasing safety levels. As opposed to the traditional inspection methods, Digital Twins apply virtual models and sensors to observe structures, like bridges, dams, and buildings immediately, which reduces the repair costs by 30–50% and extends the project’s lifespan by 20–30%. This research studies four real-world projects, namely, …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 1–9 Read article
-
Cost and Schedule Performance in Construction Projects: Assessing the Usage and Challenges of Planning Techniques in Port Harcourt
Abstract: Abstract Planning is useful for establishing performance metrics during the execution of construction projects and for streamlining cost and schedule outcomes. A well-developed contract plan thus helps to ensure that the project is completed on time, within budget, and to the required standards and quality. Various planning techniques are available for use in enhancing cost and schedule performance on construction projects, each with its applicability, cons, and pros. This study …
Published in International Journal of Construction Engineering and Planning · Vol. 11, Issue 1, 2025 · pp. 15–27 Read article