Search
309 articles for “Compression”
-
Experimental Investigation on the Properties of Concrete Replacing Waste Plastic as Aggregates for Solving Waste Management Problem
Abstract: Solid waste management is one of the growing problems of every country. As part of this ongoing program to consider the growing waste management, pollution problem, and prevention framework in India, the Ministry of Environment has suggested various approaches and ways through which we can either recycle or use the most polluting materials like plastic. The present study covers one of the ways through which to recycle one of the …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 17–25 Read article
-
A Review on Waste Bakelite as Replacement Partially Over Coarse Aggregate in Concrete Mix
Abstract: Various components in India are made up of Bakelite. Saffron Global Dumping of waste Bakelite through landfill is not allowed due to it effect on soil mass and open burning is not allow because of the emission of harmful gases which cause air pollution. A large space of storehouse requires to store large amount of area for keeping waste Bakelite which becomes management problem of waste. Despite managing waste Bakelite …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 8–13 Read article
-
Application of Suitable Admixtures (Lime and RHA) for Improvement of Pavement Subgrade
Abstract: Abstract The quality of a pavement depends on the strength of its sub-grade. The present investigation has been carried out with easily available materials like lime and rice husk ash mixed individually and in combinations with different proportions. The different percentages of lime with respect to weight of dry soil were 2%, 4%, 6%, 8% 10% and for rice husk ash (RHA) were 3%, 6%, 9% and 12%. In each …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 1, Issue 2, 2015 · pp. 14–31 Read article
-
Soft Computing Based Prediction of Ultimate Bearing Capacity of Footings Resting on Rock Masses
Abstract: The present study attempts to predict the ultimate bearing capacity of shallow foundations on rock masses using five different soft computing techniques namely i) random forest regression approach, ii) artificial neural networks, iii) support vector machine with polykernel, iv) support vector machine with (radial basis function) RBF kernel and v) M5P model tree. The ultimate bearing capacity was assumed to be dependent rock mass rating, unconfined compressive strength of rock, …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 1–14 Read article
-
Improving Workability and Strength of Concrete using Plantain Liquid as Mineral Admixture
Abstract: The performance of concrete is one that is of great concern both to structural and highway engineers; therefore, there has been a momentum to continuously improve its performance in order to serve the interest of stability and economy. The present research sought was concerned with modification of the property of concrete in the fresh and hardened state. The procedure involved addition in varying amounts 5–25% of plantain liquid as a …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 2, 2017 · pp. 22–28 Read article
-
Design of Deep Beam Using Strut-and-Tie Method A Case Study of Pile Cap
Abstract: This study takes a look at modeling of deep beam using strut-and-tie method using pile cap as a case study. There are B and D region in the deep beam (B standing for beam or Bernoulli and D standing for discontinuity or disturbance). A deep beam has a span-depth, a/d ratio ranging from 2.0 to 2.5. Thereafter, the strut-and-tie modeling (STM) of pile cap was displayed. The STM was later …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 1, 2018 · pp. 6–14 Read article
-
Experimental Investigation On Replacement Of Fine Aggregate With Manufactured Sand And Partial Replacement Of Cement With Ggbs
Abstract: Concrete is the most widely used construction material in civil engineering industry because of its high structural strength and stability. The concrete industry is looking for supplementary cementitious material or industrial by product with the objective of reducing the carbon dioxide emission which is harmful to environment. Ground granulated blast furnace slag (GGBS) is the solid wastes generated by industry are used as a replacement material for cement. Manufactured sand …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 2, 2018 · pp. 1–6 Read article
-
Enhancing Concrete Durability through Partial Replacement of Coarse Aggregate with Recycled Plastic Granules
Abstract: This research study aims to explore and present the practical application of plastic granules as a substitute for coarse aggregate in the production of concrete cubes and cylinders. The concrete specimens, comprising various percentages of plastic granules (0%, 5%, 10%, 15%, 20%, and 25%), were manually cast and then subjected to empirical tests to evaluate their split tension and compression strengths. Surprisingly, the study found that the compressive and split …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 1, 2023 · pp. 38–47 Read article
-
Addition of Musa-Pseudo Stem Liquid for Improved Performance in Sandcrete Mixtures Used for Civil Engineering Works
Abstract: The functioning of re-characterized sandcrete mortars is one that is of great concern both to structural and highway engineers; therefore, there has been an enthusiastic need to continuously improve its performance in order to serve the interest of stability and economy. The present research sought was concerned with modification of the property of sandcrete mortar in the fresh and hardened state. The procedure involved addition in varying amounts 5–25% of …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 2, 2017 · pp. 38–48 Read article
-
Video Coding with Packed Stream in Image Processing and Applications
Abstract: Scalable video coding is a technique which allows a compressed video stream to be decoded in several different ways. This ability allows a user to adaptively recover a specific version of a video depending on its own requirements. Video sequences have temporal, spatial and quality scalabilities. In this work we introduce a novel fully scalable video codec. It is based on a motion-compensated temporal filtering (MCTF) of the video sequences …
Published in International Journal of Image Processing and Pattern Recognition · Vol. 6, Issue 1, 2020 · pp. 36–44 Read article
-
Study of Mechanical Properties of Aluminum Nanocomposites using Auto Ignition Technique
Abstract: Al2O3 - high ZrO2 nanocomposite was synthesized by auto-ignition technique using metal nitrate and citric acid with a ratio of citrate: nitrate equal to 1:1.5. The precursor zirconium oxynitrite was derived from precipitation of zirconium oxycloride followed by dissolution of gel in nitric acid. The thermal decomposition behaviour of the gel was studied in order to study the decomposition behaviour and to determine the crystallization temperature. The effect of calcination …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 36–42 Read article
-
Computation of Gas Turbine System as Renewable Energy Conversion Mechanisms
Abstract: In the present work thermo-economic analysis of a cogeneration cycle is carried out so that any power generation industry can choose best power generation system out of the choices available with organisation. Mathematical modeling for the cost evaluation of each component is developed and results are obtained with computational programming tool EES (Engineering Equation Solver). Form results it is being found that with change in combustion chamber outlet temperature or …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 10–15 Read article
-
Mechanical Behavior of AA7075/Glass Fiber Reinforced Polymer Composites
Abstract: This paper reports on the mechanical properties of As-cast and heat-treated AA7075 polymer composites reinforced with glass fibers from 1 to 5 wt%. The polymer composites were fabricated using the Compo casting method, in which short glass fibers were introduced into the vortex created in the molten alloy through an impeller rotated at 500 rpm. The molten mass was thoroughly stirred and poured into permanent molds and squeezed under pressure. …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 11–20 Read article
-
Thermodynamics Modelling And Performance Assessment Of Gas Turbine Power Plant
Abstract: In this study, thermodynamics modelling of gas turbine engine is performed based on thermodynamic relations. The thermodynamic model reveals that the influence of operating parameters including the compression ratio, turbine inlet temperature and ambient temperature has significant effect on the performance of gas turbine engine. Energy and exergy analyses were conducted to evaluate performance of the selected power plant and to assess the effect of operating parameters on energy loss …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 1, Issue 1, 2015 · pp. 11–35 Read article
-
Experimental verification of strength of glass fiber reinforced polymer matrix composites
Abstract: An experimental investigation has been carried out to develop a new PMC (Polymer Matrix Composite) using commercially available Epoxy and Polyurethane resin systems. These resin systems would be reinforced with glass fibers, filler materials and aluminium foils. The laminates have been prepared by using the hand lay-up technique for eight layers and the mechanical tests such as tensile and compression test have been conducted for the PMC. This work has …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 3, Issue 1, 2017 · pp. 43–51 Read article
-
Optimisation of Ratio of Center Distance of Adjacent Hole to Diameter of Pre-stressed Holes by FEA
Abstract: Residual compressive stress zone around a fastener hole is introduced by a process called pre-stressing. This is being done to reduce adverse effect of cyclic tensile stress and to restrict the fatigue crack growth due to material flaws or imperfect surfaces. The objective of this investigation is to optimize the inter-hole distance between adjacent cold expanded holes on a plate restricting the deformation of material between holes to the elastic …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 2, 2020 · pp. 40–48 Read article
-
Experimental Investigation of FSW on Al 6061-T6 MG Dissimilar Joints
Abstract: Friction Stir Welding (FSW) is a solid-state joining technique that has shown significant potential for welding dissimilar materials, such as aluminum and magnesium alloys, which are difficult to join using conventional fusion welding methods due to large differences in their physical, thermal, and metallurgical properties. During FSW, contact between the rotating, wear-resistant tool shoulder, the pin, and the work piece produces frictional energy. Additional thermal energy develops because of intense …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Advanced Magnesium-Based Metallic GlassComposites for Biomedical Implant Applications: AMachine-Learning-Informed Approach
Abstract: Magnesium-based bulk metallic glasses (Mg-BMGs) combine strength, low density, and tunable degradability. Their amorphous matrix has a small plastic process zone. This zone is only about 4 μm wide. A small process zone keeps most glasses brittle. Adding a second phase is the best fix. This chapter extends Mg-BMGs to true composites. We call these Mg-based bulk metallic glass composites, or Mg- BMGCs. The chapter covers matrix engineering and interfacial …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 48–65 Read article
-
Integrating Machine Learning with Edge Computing for Real Time Data Analytics
Abstract: Smart devices such as mobile phones, sensors, cameras, etc., are producing a huge amount of data every second. This data is normally sent to cloud servers for processing. This approach is normally slow and expensive, and it also raises a lot of privacy issues as data is sent over the internet, which takes a lot of time to return with results. This study aims to address the issue through the …
Published in International Journal of Distributed Computing and Technology · Vol. 12, Issue 2, 2026 Read article
-
COMPUTATIONAL AND EXPERIMENTAL ANALYSIS OF A DOUBLE PIPE HEAT EXCHANGER WITH AND WITHOUT INSERTS USING NANO FLUIDS
Abstract: In applications that need warming procedures, improved heat exchange will also significantly boost heat efficiency and reduce the expense of design and operation. Double tube heat exchangers are best suited for high temperature and high compression applications due to their simplify diameters. Although they are cheap, they disseminate to the other types in a comparatively large amount. A number of approaches were developed to accomplish the required heat transfer rate …
Published in International Journal of Computer Aided Manufacturing · Vol. 12, Issue 1, 2026 · pp. 1–9 Read article