Search
274 articles for “adequate”
-
Evaluation of Reciprocating Pump Operation Using Reliability Analysis
Abstract: In this work, the aim is to carry out a reliability analysis of reciprocating pump operation. The reciprocating pump system and components were evaluated using the Weibull Analysis to obtain reliability, maintainability, availability, and unreliability. The number of failures (NF), mean time between failure (MTBF), Mean Up-Time (MUT), Time to Repair (TTR), Probability Density Function (PDF), Cumulative Density Function (CDF), Hazard Rate and Desirable Time for Systematic Intervention were also …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 30–42 Read article
-
Effective Utilization of Agricultural Waste for Removal of Heavy Metals from Waste Streams
Abstract: The progress of industrialization and urbanization poses a great threat to the comfort of people's lives. The production and disposal of large amounts of toxic pollutants have severely polluted our environment. The most hazardous contaminants in soils and surface waters include some organic compounds, like synthetic dyes (SD) and toxic substances (heavy metals). It is of great interest worldwide due to its toxicity to many organisms. An important topic is …
Published in International Journal of Environmental Chemistry · Vol. 8, Issue 2, 2022 · pp. 1–11 Read article
-
Synthesis of Low Cost Artificial Sand From Fly ash and its Application as a Filter Material
Abstract: The usage of natural river sand is increasing vastly. Geopolymers are materials with three-dimensional alumina silicate structures that have a high mechanical strength and can be used as an alternative to Portland cement. The probability of using Natural river sand can also be replaced with geopolymer synthetic sand. There are many properties which may lead the scarcity of natural riversand they are Because of landslides, tsunamis and erosion. The GPSS …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 8, Issue 2, 2022 · pp. 15–24 Read article
-
Deciphering Foam: Exploring Antifoaming Agents and Their Mechanism
Abstract: Antifoaming agents are critical additives employed in industrial processes to counter foam formation, which can hinder efficiency and cause equipment damage. These agents, available in various formulations like silicone-based, mineral oil-based, and polyethylene glycol-based, are selected based on specific foam properties and operating conditions. Choosing the right antifoam agent is crucial, with silicone-based ones often preferred for their stability and effectiveness across different pH levels and temperatures. Conversely, mineral oil-based …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 9, Issue 2, 2023 · pp. 32–36 Read article
-
Strategies for Electronic Wastes Management for Sustainable and Green Environment in Nigeria
Abstract: Adequate strategies need to be put in place for electrical and electronic waste management, renewable energy commercialization, green societies and sustainable development in Nigeria. This paper examined handling, disposal and management of electronic waste in Nigerian environment. Methodology adopted includes literature reviews of issues on this subject matter, specific site inspection, surveys and secondary data from users and industries with massive electronic waste. It has been discovered that these wastes …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 7, Issue 2, 2021 · pp. 38–46 Read article
-
Environmental implications of stubble and their usages as soil and concrete reinforcement
Abstract: Stubble burning has been reckoned among the major contributors to air pollution, especially in North India. It is a significant source of gaseous pollutants causing serious damage to human health and the environment. The situation is more hazardous due to the intensive rice-wheat rotation system which generates a large amount of stubble with no significant use as good as burning due to poor knowledge of the management of stubble. It …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 1, 2022 · pp. 1–7 Read article
-
Effect of Compression Pressure on the Strength and Fuel Properties of Maize Cob Briquettes
Abstract: Biomass can be densified under a high compression pressure or a low compression pressure. The type of raw material, moisture level, particle size, and form typically all influence how much pressure should be used. This study utilized maize cobs and waste paper pulp to produce briquettes which are seen as alternative fuels. The goal was to determine how compression pressure affected the strength and fuel characteristics of the briquettes that …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 1, 2022 · pp. 16–24 Read article
-
Monitoring the Operation of Mobile Air Compressor Component of Filters Using Reliability Analysis Concepts
Abstract: The performance of filter component was monitored in a mobile air compressor operating in a gas plant facility located in Rivers State. The investigation covers the monitoring of the numbers of failure, downtime, and computation failure rate, mean time between failure, reliability, unreliability, availability and unavailability. In this study, it was experienced that the failures occur due to over usage as well as presence of particles in the cooling fluid …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 9, Issue 1, 2023 · pp. 18–22 Read article
-
Techno-Economic Analysis of Packed Bed Type Thermal Batteries for Surplus Renewable Energy Storage
Abstract: Low carbon electricity from renewables will form the bed rock of the energy transition necessary for climate change mitigation. However, variable renewable generators suffer from intermittency and variability – there can be large surplus power available at times which cannot be dispatched to the grid. At many times, the practice is to curtail surplus renewable output, which is wasteful and not economic. There are also phases when generation is not …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 9, Issue 2, 2023 · pp. 14–21 Read article
-
Mathematical Model for the Predictionof Compressive Strength of High Performance Concrete (HPC) Containing Saw Dust Ash and Superplasticizer
Abstract: This paper examined the prediction of compressive strength of High Performance Concrete (HPC) containing Saw Dust Ash (SDA) and Conplast SP 430 (superplasticizer), using Osadebe’s regression theory.The model developed was tested for adequacy at 95 % level of confidence using F-Statistic and was found to be reliable. A computer program written in visual basic 6.0 based on the model formulated was invoked for quick prediction of the mix ratios corresponding …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 2, 2020 · pp. 15–28 Read article
-
THE ARBITRATION AND CONCILIATION ACT OF 1996 AND 2019 OF INDIA- COMPARATIVE STUDY
Abstract: The settlement undertaken by panel of one or more persons in case of disputes is called arbitration and the panel called the arbitrators. These arbitrators are mutually selected by parties for the purpose of investigation and settlement of disputes. The law governing this was laid by introducing the Arbitration and Conciliation Act 1996. With time many questions were raised in reference to the adequacy of the act in quick settlement …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 1, 2022 · pp. 23–31 Read article
-
Concrete Quality Evaluation Using Non-destructive Test
Abstract: This paper analyses the non-destructive testing (NDT) measurements used to assess on site strength and condition of reinforced concrete. To ascertain the residual strength of concrete, extent of corrosion, it is imperative to assess the health of the RC structural members of a building using State-of-the-art non-destructive testing (NDT). NDT of concrete structure is carried out in order to assess the health of structure without impairment of its desirable properties. …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 1–4 Read article
-
Review Study on re-strengthening of reinforced concrete circular column using steel strips
Abstract: This technique fixes thin steel plates i.e. steel encasement or tie plates i.e. steel cage around the column with steel angles at each corner, clamped to the concrete and welded together. Adequate tightening of the jackets can be ensured by means of heat tensioning. The use of steel jackets can enhance the shear strength of columns considerably. However, due to their low flexural stiffness they typically have poor confinement efficiency …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 1–9 Read article
-
A parametric study for the behaviour of steel plate-anchor assembly embedded in concrete under cyclic loading
Abstract: Steel plate-anchor assembly embedded in concrete is a common type of connection system used for connecting structural steel members to concrete members. These assemblies are subjected to different loading cases depending on their use. Since the behaviour of such assemblies is quite complex and depends on a number of factors associated with different components, it was decided to adopt finite-element technique to obtain a reasonably accurate analytical solution for the …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 21–36 Read article
-
Strength & Durability of Concrete with Sand Blasting Residue
Abstract: Sand blasting residue (SBR) is commonly obtained as a by-product from chain manufacturing industries. Although it is a waste material but can be used in the mixing of concrete. The work has been divided into two parts. Part 1 covers preparation of M20concreteby substituting SBR as replacement of sand in different percentage such as 40%, 50%, 60%, 70% & 80%. The w/c ratio is kept as 0.5 with adequate does …
Published in International Journal of Concrete Technology · Vol. 6, Issue 1, 2020 · pp. 32–41 Read article
-
Prediction of Compressive strength of Periwinkle Shell Aggregate Concrete Using a Quadratic Polynomial Function
Abstract: In this study, a mathematical model is developed to predict the compressive strength of normal concrete made with periwinkle shell as coarse aggregate using a quadratic polynomial function. The response function is expressed as a multivariable function of the proportions of the component materials (water, ordinary Portland cement, sand and periwinkle shell). A total of thirty experimental runs were used to demonstrate the applicability of the mathematical model developed. The …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 10–21 Read article
-
Optimization of Compressive Strength of Segmental Interlocking Stones
Abstract: The failure of most segmental interlocking stones used as pavement materials is traceable to lack of knowledge of the mix ratios that would optimize the compressive strength of the end products. In this study, the compressive strength was optimized based on Scheffe’s simplex lattice approach. The reliability of model developed was investigated using F-statistic and was found to be adequate. A computer program written in basic language was used to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
Taguchis Parameter Design Approach to normal cement concrete mixture proportioning
Abstract: This paper presents the results of the optimization of normal cement concrete mixture using Taguchi approach. The Taguchi experiments were designed using an L9 orthogonal array with three factors and three levels each. The water-cement ratio (W/C), total aggregate-cement ratio (TA/C) and total aggregate-water ratio (TA/W) were treated as the control factors. The effects of the water-cement ratio, total aggregate-cement ratio and total aggregate-water ratio on the compressive strength were …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 23–29 Read article
-
Solid Waste Management of Beta-1
Abstract: With rapid urbanization, the situation is becoming critical. The urban population has grown fivefold in the last six periods with 285.35 million people living in urban areas as per the 2001 census. Waste is littered all over leading to insanitary living conditions. Municipal laws overriding the urban local bodies do not have adequate provisions to deal effectively with the ever-growing problem of solid waste management. Solid waste management is one …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 18–33 Read article
-
Neural network based prediction of shear wave velocity for soils
Abstract: The paper presents a study on the prediction of the shear wave velocity (Vs) for all soils using ANN model from cone penetration test data. The input parameters in the obtained of ANN models were vertical effective stress, sleeve friction, cone tip resistance and output was the shear wave velocity. These parameters were considered to construct the ANN model which has 3-2-1 topology in prediction of shear wave velocity. Further, …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 23–34 Read article