Search
1795 articles for “different”
-
Characterization of the Impact Strength in Cryogenic Treatment of TIG Welded Nickel-based Superalloy
Abstract: The TIG welding of the IN617 heat and oxidation resistant has been precisely controlled through welding parameters, while γ'-Ni3(Al, Ti) phases predominantly controlled solution strengthening, and precipitation strengthening and carbides in γ matrix, as well as γ' precipitate’s shearing mechanism is prominent to enhance strength of superalloys. The high hardness has been preserved owing to strengthening major elements such as Cr, Co, and Mo etc., and the well coherency maintain …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 1–12 Read article
-
Environment Friendly, Exterior Grade Resin Adhesive from Phenol-Animal Glue Formaldehyde (PGF)
Abstract: Phenoplast and aminoplast based resins are the important adhesive for the manufacturing of marine grade, shuttering and moisture resistance plywood. Environmental concerns and higher cost of petroleum based resins have resulted in the development of technologies to replace phenol partially by biomaterials for the manufacturing of resin adhesive. Natural bio-based materials such as tannin, CNSL (cardanol), lignin soya etc. are used as partial substitution of phenol. This paper presents the …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 16–22 Read article
-
Green Adhesive—Using Glyoxalated Lignin and Hydrogenated Resin as Ecologically Safe Wood Adhesive for Interior Plywood
Abstract: Petroleum-based adhesive such as urea formaldehyde and phenol formaldehyde resin dominates adhesive market which releases formaldehyde and VOC to the environment. The purpose of this study is to develop an adhesive based on isocyanate in combination with compounds from renewable sources like lignin, protein and starch. Adhesive formulation was developed by incorporation of hydrogenated resin, corn starch/PVOH emulsion with glyoxalated lignin (GL) and evaluation properties of the adhesive with plywood …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 23–27 Read article
-
Isolation and Characterization of Tamarind Seed Polysaccharides Being Used as a Biopolymer in Modern Drug Delivery System
Abstract: Tamarind seed polysaccharide (TSP) obtained from the seed of Tamarindus indica tree. It possesses different properties like high viscosity, broad pH tolerance, biocompatibility, mucoadhesive nature. It is used as thickener, stabilizer, gelling agent in food and pharmaceutical industries and Gums are widely used natural materials for conventional and novel dosage forms. The objective of present investigation was to search for a cheap and effective natural polymer that can be used …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 1, 2016 · pp. 1–6 Read article
-
Numerical Simulations on Suitability of Blending Indian Coal during Normal Air Combustion
Abstract: The development of the country’s economy in the past decade has increased the energy consumption in India. The major source of energy in our country is combustion of fossil fuel i.e. coal. The research on pyrolysis of coal and other fossil fuels is related to unsteady state, one dimensional, variable property model of transport phenomena with inclusion of heat, mass and momentum transfers. In the present research work mainly aimed …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 1, 2018 · pp. 20–27 Read article
-
Enhancement of Power Factor and Effective Performance of an Induction Motor Based Converter-Fed Rotor
Abstract: Abstract— Taking a novel concept of a rotor that is fed by a converter, this paper attempts to investigate an induction machine. In this the stator has been directly connected to the grid and it is also Y connected while the rotor windings are open-ended fed to a back-to-back converter with a floating capacitor. The factors that are carefully studied are the power factor and the efficiency improvements of the …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 1, 2018 · pp. 10–19 Read article
-
Review on the Capillary Flow Characteristics in Polymer based Microfluidic Systems
Abstract: In this review different effects to control the surface-driven capillary flow in polymer based microfluidic systems. Author has used the polymers like polyimide, SU-8 and polymethylmethacrylate (PMMA) to fabricate the polymer based microfluidic systems. Author has studied the individual effects of surface wettability, surface free energy, surface chemistry, surface topography, channel aspect ratio, capillary pressure, kinetic energy, centrifugal force, surface area to volume ratio, microfluidic friction, liquid viscosity and effective …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 1, 2018 · pp. 28–33 Read article
-
Design and Simulation of Single Phase Five Level Inverter for a Novel Solar PV Hybrid Energy System
Abstract: Abstract - In current global energy scenario, renewable energy sources can play an important role in meeting the ever increasing energy demand. This is due to exhaustive nature of fossil fuels and the environmental pollution caused by other conventional energy sources. Among renewable energy sources, solar photo-voltaic system is the most popular one as solar energy is available in abundance without paying any cost. The output voltage generated from the …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 1, 2018 · pp. 1–9 Read article
-
MECHANICAL BEHAVIOR OF MICRO-LATTICE STRUCTURE OF BCC ARCHITECTURE IN SANDWICH CONSTRUCTION UNDER UNI-AXIAL COMPRESSIVE LOADING CONDITIONS
Abstract: ABSTRACT: Due to high energy absorption and fire resistant characteristics, the researchers have focused on micro-lattice structures. This research paper focused on applications of micro-lattice structures in the foreign object impact conditions and has high potential in the future of any structural applications, mainly aircraft structural applications. The micro-lattice structures are of body centered cubic (BCC) architectures and for modeling, the structures with four different unit cell edge lengths are …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 1–23 Read article
-
SEPARATION OF CO2/CH4 USING POLYMERIC MEMBRANES - REVIEW
Abstract: Separation of CO /CH mixture is widely done efficient separation of mixture into desired components unit processes and unit operation had 2 4 been developed with passage of time. Sometimes using conventional technologies. CO2 when carried along with CH4 can cause additional cost of pumping. Most commonly used technique like cryogenic separation, adsorption and absorption are used for decades for separation of CO2 form CH4.Membrane has been developing technology for …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 1, 2019 · pp. 13–29 Read article
-
A Model to Study the Effect of Homogeneous Nucleation and Emulsifier Amounts on Methyl Methacrylate Emulsion Polymerization in a Seeded Semi-batch Reactor
Abstract: ABSTRACTAn extensive model is developed for methyl methacrylate emulsion polymerization. The assumption of monodispersed particle size distribution is used in developing the model. It is found that inclusion of homogeneous nucleation in the model leads to under prediction of variation of conversion with time. The effects of three different emulsifier amounts on the variation of conversion with time at 50°C isothermal reactor operation, keeping all the other ingredients constant are …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 2, 2019 · pp. 9–17 Read article
-
Corrosion Studies of Al 7075 alloy using Cetirizine drug as drug in Arabian Sea water sample
Abstract: The inhibition of Cetirizine drug on corrosion of Al 7075alloy in Arabian Sea water medium became investigated by way of weight reduction measurement, Tafel Polarization, and EIS techniques. The electrochemical outputs proved that the prepared Drug act as powerful corrosion drug. The outputs found from electrochemical, weight loss and EIS studies showed exact consistency. The Present paper involves examine of weight loss, Tafel polarization, EIS and microstructural behavior of Al …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 25–31 Read article
-
Cords of tyres to shed hybridization
Abstract: AbstractCords of tyres have descriptive issues for mechanical stability, break at elongation strength and dimensions. Two polymer reinforced cord form has lying usage from nylon and polyester to search respects for hybridized contributed formation after form from chords. Poly(ethylene naphthalate)-in-polyester yarn or aramid-in-nylonhybrid has provisioned steel cord substitution to raise steer-in-speed at subjective low-in-weight shed. Competencies among as routed fabrics under differential twisting has almost similar break-in-twist strengths as well …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 2, 2020 · pp. 5–11 Read article
-
Fabrication and Study of Natural Plant Fiber Reinforced Polymer Composites
Abstract: Snake grass fiber (sansevieria trifasciata fiber, STF)-strengthened polypropylene (PP) based composites (30 wt% by fiber) was made by hot press technique. STFs were modified by ultraviolet (UV) rays and the composites they produced were evaluated. Optimized STFs were again modified with monomer using UV rays to progress the mechanical features of the composites. Monomer concentration and no. of UV rays were optimized in terms of grafting and mechanical features of …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 11–22 Read article
-
Thermal, Mechanical, Morphological and Rheological Behavior of HDPE and Algae Based Polysaccharide Blend
Abstract: The use of renewable resource based materials as filler for thermoplastic polymers showed wide scope in agriculture, textile and commodity applications due to low cost and high mechanical properties. In this work marine red algae based polysaccharide was used as a filler material for high density polyethylene (HDPE). The polysaccharide extracted from marine based red algae is a byproduct of algae to oil extraction process. The blends were prepared using …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 35–44 Read article
-
Review On Carbon Reinforced Fiber Composites Using Banana Fiber as Reinforcement Material
Abstract: Composites play a vital role in the area of materials science and engineering as compared to conventional materials composite materials seems to be better than alloys /metals. Composites mean mixing of two different materials of various properties. Composites materials will work for more life no wear and tear problem less weight compared to metal/alloys. In this paper review is studied on carbon reinforced fiber composites using banana fiber as reinforcement …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 1–4 Read article
-
Preparation and Evaluation of Plant-Based Coir Fiber-Reinforced Polypropylene Composites
Abstract: In the present article, unidirectional coir fiber (CF) and alkali-treated CF (ACF) were incorporated in polypropylene (PP) with and without 3-aminopropyl trimethoxy silane (AS) and tetramethoxy orthosilicate (TS) to produce composites by a compression molding technique. The basic properties of PP/CF composites (e.g. tensile strength, tensile modulus, impact strength, and water absorption) have enhanced with increasing CF content. The incorporation of AS and TS after alkali pretreatment for CF composites …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 34–47 Read article
-
Modification of Poly Vinyl alcohol by Grafting and Appropriate Blending for Higher Stability and Biomedical field Application
Abstract: PVA is a one of the most important vinyl polymer which is widely used in industrial applications. PVA polymer has excellent adhesive property, solubility in water and it is biodegradable. But when it is modified by appropriate crosslinking or grafting or blending techniques then its physical as well as stability is altered. When polymer is modified by blending with other materials then its degradability decreases but thermal stability increases. In …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 27–33 Read article
-
Investigation the Potential of Sugarcane Bagasse for the Production of 5-HydroMethylFurfural
Abstract: The aim of this study was to invesigate the potential of sugarcane bagasse for 5-Hydroxymethylfurfural (5-HMF). Nowadays, food crops such as glucose and fructose were the main derived for the production of 5-HMF. The potential of sugarcane bagasse to replace the consumption of glucose and fructose was investigated through studies. Consequently, the primary aim of this research was to explore the feasibility of utilizing bagasse as a source for generating …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 21–29 Read article
-
Reviewing the Evolution of Nanotechnology in the Oil and Gas Sector: Focus on the Utilization of Silica Nanoparticles
Abstract: Nanotechnology is advancing notably in the oil and gas sector, with its applications demonstrating substantial progress. The use of nanoparticles in various aspects of the industry has shown promise in addressing challenges and improving efficiency. Nanotechnology is finding applications across multiple facets of the oil and gas industry, encompassing areas such as the development of drilling and hydraulic fracturing fluids, cementing for oil wells, improved oil recovery techniques, corrosion prevention, …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 30–36 Read article