Search
393 articles for “Resistivity”
-
Production and Characterization of Biomass Briquette from Sawdust and Cow Dung Admixture for Domestic Cooking Applications in Northern Ethiopia
Abstract: This study explored the possibility of producing and characterize biomass briquettes from sawdust and caw dung admixture that could be used as a sustainable fuel sources of energy supply for domestic cooking applications. In this study, Potato starch used as a binder. The physical and composition properties of the sawdust and cow dung as well as the developed biomass Briquettes were determined using Thermogravimetric analysis. A portion of sawdust and …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 5, Issue 2, 2019 · pp. 49–57 Read article
-
Study of Durability Properties of Bagasse Ash Concrete and Its Behaviour when Exposed to Elevated Temperatures
Abstract: The major driver for the economic growth and social progress of any country is its construction sector. In India, it is estimated that construction contributes 8% to 9% to GDP and this share is likely to increase in coming years. High-performance concrete made from ordinary Portland cement (OPC) and various supplementary cementitious materials (SCM) are alarmingly finding their use in construction worldwide. Bagasse ash (BA), one such SCM, the agro-industrial …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 51–62 Read article
-
No Fine Concrete
Abstract: No-fine concrete has been in use in many countries over more than a century. Its higher porosity helps in percolating rain water directly to ground and thereby helps in recharging groundwater aquifer. In this study, 3 batches of no-fine concrete each with two different sizes of aggregate were prepared to find the mix that generated high compressive strength and study the effect of percentage of fine aggregate on the compressive …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 18–30 Read article
-
Soil Reinforcement Using Waste Plastic Materials
Abstract: Soil reinforcement is a ground improvement techniques used in different civil engineering structures like earth retaining structures, embankment, foundations, road construction, etc.In this study, an attempt was made to collect the soil samples in such a way that it has different plasticity index. Accordingly, samples from surrounding areas of the Kanpur were collected and analyzed for their plasticity index. It was observed that three locations such as PSIT Campus, Naramau …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 10–20 Read article
-
Effect of Shear Wall on Seismic Performance of High Rise Building Adopting Linear Dynamic Analysis
Abstract: Earlier, the buildings were designed for only dead loads not for the seismic loads. But, as the populations go on increasing and there is limited space available for living. So now a day we raise the height of the structures, as height is increases different parameters affects the structure like seismic loads and wind loads. Seismic force is a lateral horizontal force acting on throughout the height of the building. …
Published in International Journal of Structural Engineering and Analysis · Vol. 6, Issue 1, 2020 · pp. 15–28 Read article
-
Finite Element Modeling of RC Beam Column Sub-assemblages Subjected to Column Loss Scenario
Abstract: Progressive collapse is a situation where a failure of whole or large part of a structure occurs that has been initiated by failure of a relatively small part of the structure such as failure of any primary structural element. When a vertical load carrying element, typically a column is lost, the loads that are supposed to pass through lost column need to be safely transferred to the adjacent elements to …
Published in International Journal of Structural Engineering and Analysis · Vol. 6, Issue 2, 2020 · pp. 1–20 Read article
-
Evaluation of Rutting Susceptibility of Bituminous Mixes Using Finite Element Modeling
Abstract: Pavement performance mainly depends on the quality of bituminous mixes. Poor bituminous mixes cause premature failures such as rutting or permanent deformation, cracking, bleeding etc. The design of bituminous mixes should contain certain criteria to prevent premature failures. The mixes designed based on these criteria are generally known as performance based mix design and are gaining popularity in the recent times. Among various types of pavement failures, permanent deformation or …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 2, Issue 1, 2016 · pp. 50–54 Read article
-
Effect of Aggregate Shape and Binder on the Rutting Characteristics of Bituminous Mixes
Abstract: Rutting or permanent deformation is the depression in the wheel paths due to accumulation of small amounts of unrecoverable strains under the channelized repeated wheel loads. Shear deformation or lateral plastic flow of the bituminous mix from the wheel tracks also results in rutting. Performance of bituminous mixes is influenced by the constituents of the mix made of aggregates and binder. Among various parameters of these two ingredients, aggregate shape …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 1, 2017 · pp. 1–6 Read article
-
The Effect of Carbon Percentage on Structural Steel’s Compressive and Tensile Strength: A Literature Survey
Abstract: The fundamental necessity of this survey is to check the enhancement of the strength, hardness, dimensional stability and wear resistance by passing them through the cold temperature that enhance the hardness of the substance as a result of the increment in which it took place within the proportion of primary solid solution within the structure. If the type of methods mentioned in the article are employed in manufacturing and production …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 2, 2015 Read article
-
The Metallurgical Properties of Beryllium
Abstract: Beryllium is a toxic bivalent element, steel gray, strong, light-weight, primarily used as hardening agent in alloys. Beryllium has one of the highest melting points of the light metals. It has excellent thermal conductivity, is nonmagnetic, it resists attack by concentrated nitric acid and at standard temperature and pressures beryllium resist oxidation when expose to air. Keywords: Beryllium, metallurgical properties, applications, uses
Published in International Journal of Metallurgy and Alloys · Vol. 3, Issue 2, 2017 · pp. 1–3 Read article
-
Effects of Tungstate and Nitrite Ions as Corrosion Inhibitor for Cr-10Zr-10W Alloy in 0.5 M NaCl Solution
Abstract: The effect of different concentrations of tungstate and nitrite ions as corrosion inhibitors on the corrosion behavior of the sputter-deposited ternary Cr–10Zr–10W alloy was studied in 0.5 M NaCl solution open to air at 25±1°C using corrosion tests and corrosion potential measurement. The use of both the tungstate and nitrite ions enhanced the corrosion resistance properties of the alloy in 0.5 M NaCl solution. It is found that the tungstate …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 11–19 Read article
-
Exploring Alloys: Properties, Applications, and Future Trends
Abstract: Alloys, integral to modern technology and engineering, are combinations of metals with other elements designed to enhance material properties. This exploration delves into the diverse properties, widespread applications, and emerging trends in alloy development. The study examines mechanical properties such as strength, ductility, and corrosion resistance, which are tailored through compositional variations and processing techniques. Applications across various industries—including aerospace, automotive, electronics, and biomedical fields—are highlighted, showcasing the versatility and …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 1, 2023 · pp. 13–19 Read article
-
Silver Nanoparticles for Enhancement of Antibiotic Antimicrobial Therapy
Abstract: With the current rise in antimicrobial resistance and infections resulting in high mortality and morbidity. There is need for novel strategies to combat these challenges such as nanoparticle technology has offered excellent opportunities. The use of metal nanoparticles such as silver with well-established antimicrobial activity conjugated with other antimicrobials has the potential to overcome the challenge of drug resistance due to its multiple mechanisms of action against microbes. This reveal …
Published in International journal of Nanobiotechnology · Vol. 8, Issue 1, 2022 · pp. 32–39 Read article
-
Controlled Texture of Magnetron Sputtered Transparent Conducting ZnO: Al Films for Solar Cell Applications
Abstract: Textured transparent and conducting ZnO:Al films were prepared by rf-magnetron sputtering on glass substrate at a temperature 3500C under Ar and Ar+O2 gas ambient. ZnO:Al thin films shows a minimum electrical resistivity of (~8.210-4 Ω-cm), and high optical transmittance (T~86–90% average) in visible region. With increasing of oxygen concentration ZnO:Al films become more compact, stoichiometric and becomes more electrically resistive. ZnO:Al shows hexagonal wurtzite polycrystalline structure with strong (002) orientations. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 1, Issue 2, 2015 · pp. 12–19 Read article
-
Synthesis & Characterization of Fe3O4 Nanoparticles for Thermal Sensing Application
Abstract: n this work, Synthesis and characterization of magnetite (Fe3O4) nanoparticles by the co-precipitation method has been done. These nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), UV-Visible spectroscopy (UV) and Thermogravimetry analysis (TGA/DSC). SEM image show morphology and porosity of material. The nanoparticles show quasi-spherical morphology with mean size around 37 nm. The XRD and FTIR confirmed the functionalization of the Fe3O4 nanoparticles. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 10–19 Read article
-
Advanced Techniques for Delamination Toughening in Carbon Fibre Reinforced Composites
Abstract: Carbon fibre reinforced composites are widely used in various industries due to their excellent strengthto-weight ratio and stiffness properties. However, one of the major issues in these composites is delamination, which occurs due to the weak interlaminar bonding between the layers of fibers and matrix. Delamination leads to a reduction in the load-carrying capacity and structural integrity of the composite. To address this issue, several advanced techniques for delamination toughening …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 49–55 Read article
-
Market Assessment of Polymer Matrix Composites
Abstract: Polymeric composition compound with a plasticizer or very low proportion of pigment or processing aids are nonordinary consider as a composition the goal is to improve strength stiffness or toughness or dimensional stability by embedding particles in matrix or binding phase. Polymer-matrix composites are valued in the aerospace industry for their stiffness, lightness, and heat resistance. They are fabricated materials in which carbon or hydrocarbon fibres (and sometimes metallic strands, …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 16–22 Read article
-
Green Adhesive—Using Glyoxalated Lignin and Hydrogenated Resin as Ecologically Safe Wood Adhesive for Interior Plywood
Abstract: Petroleum-based adhesive such as urea formaldehyde and phenol formaldehyde resin dominates adhesive market which releases formaldehyde and VOC to the environment. The purpose of this study is to develop an adhesive based on isocyanate in combination with compounds from renewable sources like lignin, protein and starch. Adhesive formulation was developed by incorporation of hydrogenated resin, corn starch/PVOH emulsion with glyoxalated lignin (GL) and evaluation properties of the adhesive with plywood …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 23–27 Read article
-
Hardened Steel an Appliance with Low Degeneration
Abstract: Combination of high hardness, toughness, and strain hardening capacities with reasonable ductility have privileged Hadfield steel in sectors such as mining, transportation, military, agricultural and earthmoving equipment. Micro- porosities formation during casting by last solidifying liquids at inter-dendritic spaces in directional solidification have been insidious crack initiators during service exposure. Particulate penetration resistant wear part surfaces for secondary and tertiary crushers are found to add chromium and vanadium prone to …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 2, 2019 · pp. 56–60 Read article
-
Microstructural and Hardness Study of A390/20wt.% SiC Functionally Graded Metal Matrix Composite
Abstract: Functionally graded materials are the upcoming new class of advanced materials, which exhibit gradual change in the microstructure and the composition in a definite direction, and hence variation in functional performance within a part. Functionally graded metal matrix composites (FGMMC) are FGM with metal and ceramic constituents. Aluminum-Silicon alloys are well-known for their unique combination of desirable characteristics, which includes excellent castability and less density combined with good mechanical properties. …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 2, 2020 · pp. 52–58 Read article