Search
119 articles for “Substrate”
-
Porous Silicon and its Nanoparticles: A Theoretical Study
Abstract: It is very simple and cost consuming technique of fabrication of porous silicon film over silicon substrate and synthesizing the porous silicon and silicon nanoparticles. The etch reactions in RIVPSE process forms the porous structures without need of complex and expensive equipments. The luminescent porous film can be fabricated using this sample technique with any cost effecting methods such as extra energy excitation like plasma or ultraviolet photon and additional …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 1, 2019 · pp. 14–18 Read article
-
Silicon Wafer Cleaning: A Fundamental and Critical Step in Semiconductor Fabrication Process
Abstract: silicon is the most interesting and useful semiconductor material in fabrication of numerous semiconductor devices. In semiconductor device fabrication, the various processing steps fall into four general categories i.e. deposition, removal, patterning and modification of electrical properties. In every steps, wafer cleaning is the primary and principle step for developing semiconductor based electronic devices. cleaning process is the removal of chemical and particle impurities without altering or damaging the wafer …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 1, 2019 · pp. 8–13 Read article
-
Basic Fundamentals of Different Solar Cells, Solar Energy Materials and Photovoltaic Performances
Abstract: Solar cell is one of the thrust areas of modern technology in the field of renewable energy. Crystalline semiconductor wafer based solar cells (SCs) (thicknesses almost 200–300 μm) mainly crystalline-Si or GaAs based solar cells are playing the legend role in last few decades. With technological revolution, thin film SCs (thickness range 1–2 μm), dye-sensitized or Graetzel, organic/polymer and plasmonic solar cell respectively are known as 2nd,3rd, 4th and 5th …
Published in International Journal of Energetic Materials · Vol. 1, Issue 1, 2015 · pp. 1–9 Read article
-
Auxiliary Characterization of (Co, Mn) Co-doped Zinc Oxide Thin Films
Abstract: Cobalt and manganese are both co-doped with zinc oxide films were set up by sol-gel turn covering strategy on quartz substrate by shifting the dopants focus. The result of dopants focus was researched by x-beam diffraction (XRD). The XRD design demonstrates that the kept movies have polycrystalline hexagonal wurtzite structure. SEM micrograph demonstrates the adjustments in morphology of very thin film as dopants fixation are fluctuating. The compositional examination did …
Published in International Journal of Metallurgy and Alloys · Vol. 2, Issue 1, 2016 · pp. 31–35 Read article
-
Execution of Poly Coatings and Corrosion of Copper
Abstract: The erosion defensive poly(aniline-co-o-toluidine) (PAOT) coatings were integrated on copper (Cu) by the electrochemical copolymerization of aniline with o-toluidine under cyclic voltammetry conditions. Fluid oxalate arrangements were utilized as the supporting electrolytes for the amalgamation of PAOT coatings on Cu. The FTIR and 1H NMR spectroscopy examines uncover that the copolymerization of aniline and o-toluidine happens on Cu substrates from a fluid oxalate arrangements and bringing about PAOT copolymer, there …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 2, 2015 Read article
-
Modern Ceramic Compose to Pervade Electronics
Abstract: This article composed from articles where ceramics, photonics, and allied fame schemed. Scheme of materials is studied to transduce optical, electrical, mechanical, and magnetic phenomenon. Evolution of description at nanometer level of distributing from non-degenerating phases schemed ferrite in the ferroelectric matter to subject magnetic memory contravened from/by electrostatic to electrical current preserved memory acts. Suggestive selective scriptive as from magneto-electric effect induced dielectric polarization of material under effects of …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 11–16 Read article
-
Ability of Metallic Materials to Resist Surface Damage Induced by High-temperature Action of Air or other Gaseous Mediums
Abstract: The features of the oxide layer scale that forms on the metal's surface and limits gas penetration into the metal, limiting the growth of gaseous corrosion, influence a metal's or alloy's oxidation resistance in an oxidising atmosphere. The rise in weight of sample being tested (due to oxygen uptake by the metal) or even the weight loss after removing the scale from the sample's surface, related to a unit surface …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 16–21 Read article
-
Polymer Composites Based Modern Sensors for Various Applications
Abstract: Sensors tradition configured to miniaturization without shape rigidity. Sensors are fabricated by flexible organic substrate embedded with two dimensional composite inorganic particulates of nano-metric dimensions or three-dimensional electro-spin filaments. Thermal degeneration and demagnetizing effects have favored 3d composites or filamentous designs than 2d composites. These sensors have wide usage in medical electronics, aerospace engineering, textile engineering, etc. Basis of techniques are same as in cloth or paper printing. These are …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 1, 2019 · pp. 32–36 Read article
-
Characterization of CeO2-NiO Thin Film Produced by Jet Nebuliser Technique
Abstract: CeO2 –NiO composite solution was sprayed as thin films by using JET nebulizer technique at the substrate temperature of 250°C. The film was characterized by X-ray diffractometer and crystallite size, lattice constant, crystallinities, phase transformations were measured. The UV-Vis spectrometer analysis was used to calculate the band gap, absorbance and percentage of transmission of the thin films was reported. The emission and excitation spectra of the sample were reported. The …
Published in International journal of Nanobiotechnology · Vol. 7, Issue 1, 2021 · pp. 1–17 Read article
-
Controlled Texture of Magnetron Sputtered Transparent Conducting ZnO: Al Films for Solar Cell Applications
Abstract: Textured transparent and conducting ZnO:Al films were prepared by rf-magnetron sputtering on glass substrate at a temperature 3500C under Ar and Ar+O2 gas ambient. ZnO:Al thin films shows a minimum electrical resistivity of (~8.210-4 Ω-cm), and high optical transmittance (T~86–90% average) in visible region. With increasing of oxygen concentration ZnO:Al films become more compact, stoichiometric and becomes more electrically resistive. ZnO:Al shows hexagonal wurtzite polycrystalline structure with strong (002) orientations. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 1, Issue 2, 2015 · pp. 12–19 Read article
-
Preparation of Conducting Polyaniline Film for OLED Application
Abstract: Polyaniline is a conducting polymer of the semi-flexible rod polymer family, this polymer captured the intense attention of the scientific community due to the rediscovery of high electrical conductivity. In present work we have prepared the polyaniline with the chemical method and done various characterization UV – vis, FTIR, and SEM. Thin film of polyaniline is prepared with the help of spin coater and determine the I-V characteristics and also …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 27–35 Read article
-
Design and Implementation of Liquid Crystal Devices and Study its Nano Applications
Abstract: Photoalignment has clear benefits in correlation with the ordinarily "scouring" treatment of the substrates of fluid precious stone presentation (LCD) cells. The fluid gem photoalignment is nano- innovation, as the thickness of the arrangement layer is around 2–15 nm. The use of the photograph arrangement and photograph designing nano innovation for the new age of photonic and show gadgets will be inspected. We discussed about LC polarization regulators, rotators, and …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 1, 2022 · pp. 31–39 Read article
-
Sliding wear behavior of plasma sprayed NiCrAlY-WC based composite coatings on AA5083 alloy
Abstract: WC based coatings was deposited by thermal spray process have been extensively used in industrial application to counter abrasive type of wear. In this study, for the first time NiCrAlY-WC based composite coatings were deposited on AA5083 substrate by plasma sprayed coating technique. The composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness. Sliding wear behavior of coated and uncoated samples was carried out on …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 21–26 Read article
-
Studies of meta-materials
Abstract: AbstractMeta-materials are artificial composites designed to operate electromagnetic property. Properties of wave nature manipulation have originated fashioned fabrication. This has to perform as rigorous as subjected under adoption specific optical or microwave or acoustic provision. Fabrication has precision formof shape, geometry, size, orientation and arrangement of materials.Applicationof meta-materialsincludes super resolution imaging and optical as well acoustic sensing. Decay, separate and couple among as split transverse electric and magnetic to that …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 47–52 Read article
-
Implications of ceramic – metal matrix compose
Abstract: AbstractThis article summarizes some formatives over WC-metal matrix composite surfacing on hard as well soft alloys. Composite surface has coated by laser, plasma and electroplating. WC-Ni composite has prepared by plasma transferred arc welding on steel surface. Thickness achieved from several mm on small parts to thin deposits on large surfaces. Cu-substrate accorded WC-Ni laser cladded deposition. Laser deposition of WC-Ni-NiCr on stainless has increased wear and erosion under flowing …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 31–37 Read article
-
Review of Composites formed of Thermoplastic as Organic Fibers
Abstract: Composites made of structural monomers gave rise to thermoplastic polymers (TMCs). Due to their usage of a thermoplastic matrix, these materials really aren't chemically reactive. TMCs may be remoulded without degrading when heated and become softer. They harden into the final shape when they cool. Thermoplastic materials bonded with plant fibers may one day be used to create impact- absorbing structure for renewable power. Its impact features of organic fiber-reinforced …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 28–33 Read article
-
CFD Analysis on Exhaust System of a Car
Abstract: The pollution and global warming is due to air pollution. It is to be noted that air pollution is mainly caused by the toxic gases from the exhaust of the automobiles. Only 30% of the fuel is converted into energy source to run the engine remaining 70% of fuel is of un-burnt hydrocarbon, carbon monoxide and nitrogen oxides. From modified catalytic converter, noise level will decrease. Here, the performance of …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 38–50 Read article
-
Electrochemical Etching on Copper Surfaces to Achieve Superhydrophobicity
Abstract: In the present study, an attempt has been made to create superhydrophobicity on copper substrate by etching the surface at different parameters (current density and time). Etching time was varied from 30 to 240 minutes. Untreated copper surface exhibited contact angle of 91.4°. The best etched surface exhibited a maximum contact angle of 142.1° for a current density of 0.01A/cm2 and etching time of 60 minutes. The structure–property relationship of …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 27–31 Read article
-
A Study on Effect of Polarity on Mechanical Properties in Saw Process
Abstract: Welding is one of the most common fabrication techniques which is extensively used to obtain desirable quality welds for intended application in various structural components. The invariable importance of welding processes has been very well realized since long times ago, therefore till nowadays there is hardly any sector of human life which has not been benefited from applications of welding. Apart of quality of flux and welding parameters, welding processes …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 1–6 Read article