Search
139 articles for “Satisfaction”
-
Optimal Tuning of PID Controller for a Continuous Stirred Tank Reactor (CSTR) Using Ant Colony Optimization
Abstract: Ant colony optimization (ACO)-based proportional integral derivative (PID) controller has been proposed for tuning optimized PID parameters in a continuous-stirred tank reactor (CSTR) process. In our proposed work, we have found that the tuning should have minimum value for rise time, peak time, settling time, etc. to be effective to design a CSTR system by optimal PID tuning. The simulation results of the proposed work reveal that the ACO-based PID …
Published in International Journal of Electrical Power System and Technology · Vol. 4, Issue 2, 2018 · pp. 32–38 Read article
-
Silicone Coating on Porcelain Insulator
Abstract: Dubai Electricity and Water Authority (DEWA) utilized porcelain insulators in the transmission overhead line system. These insulators reputed to be the best insulators with regard to the design and durability. In spite of satisfactory performance, porcelain insulators have disadvantages such as regular washing and cleaning. Because of the coastal location and industrial pollution of the overhead lines, frequent washing of porcelain insulators is required to ensure interruption free and reliable …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 6, Issue 2, 2020 · pp. 31–37 Read article
-
Quad Port Fractal MIMO antenna loaded with SRR for Wireless Applications
Abstract: This study presents a comprehensive discussion on a Quad port Fractal Multi Input Multi Output(MIMO) antenna incorporating Split Ring Resonator (SRR) technology. The use of Multiple-InputMultiple-Output (MIMO) antennas in wireless applications is a basic technological advancement withthe objective of augmenting both the channel capacity and data rates. Multiple Input Multiple Output(MIMO) antenna technology is widely used in various applications to improve wireless communicationperformance. One crucial concern associated with Multiple-Input Multiple-Output …
Published in International Journal of Microwave Engineering and Technology · Vol. 9, Issue 1, 2023 · pp. 31–39 Read article
-
Investigation on Five Phase Inverter
Abstract: In this paper, Sinusoidal Pulse width modulation (SINE-PWM) and Space Vector Pulse width modulation (SVPWM) techniques are implemented in the five phase inverter. Space vector modulation is realized using min-max method. Both SINE-PWM and SVPWM techniques are tested in simulation and hardware set-up. Results are obtained satisfactorily and it confirms the features of both PWM techniques. Keywords: Five phase inverter, SINE-PWM, SVPWM
Published in International Journal of Power Electronics Controllers and Converters · Vol. 1, Issue 1, 2015 · pp. 7–20 Read article
-
Solar Energy in Rajasthan -Recent Developments and Challenges
Abstract: Rajasthan has a vast renewable energy resources, and it has one of the largest programs in the world for deploying renewable energy based products and systems. Renewable energy is a sustainable and clean source of energy derived from nature. These innovations have for quite some time been perceived as an essential part of the answer for address energy security concerns and guarantee financial development in a domain benevolent way. Deregulation …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 2, Issue 2, 2016 · pp. 37–47 Read article
-
A Novel Approach of Low Power Routing Protocol for Mobile Ad-Hoc Networks
Abstract: The Energy management issues are very important in the context of MANET. The node energy needs to be optimally utilized so that the nodes can perform their functionality satisfactorily. MANETs are energy constrained as most Ad-Hoc nodes today operate with limited battery power. So, it is important to minimize energy consumption of the entire network in order to maximize the life time of the network. Hence, a new on-demand routing …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 1, Issue 2, 2015 · pp. 39–44 Read article
-
Congestion Control in WDM Networks
Abstract: Because of enormous transmission of information through optical strands, congestion happened routinely and it turned into a major bottleneck to the stream of information in any procedure. Numerous techniques are there to keep away from congestion however those systems for the most part include colossal expense connected with quality certification. These systems are relevant to the zone which is rich in base and assets, however these procedures are extremely hard …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 2, Issue 2, 2016 · pp. 1–5 Read article
-
Developing a Python-based Chatbot Library SansArLIB for Advanced Communication: A Comparative Study with Baseline Chatbots
Abstract: The purpose of this study was to develop and evaluate a Python-based library called "SansArLIB" for improving chatbot technology. The library was designed to provide developers with a comprehensive set of tools and resources for creating more advanced chatbots that can better understand and respond to user queries. The study involved developing the library and testing it across three different chatbot scenarios. The results showed that the SansArLIB library had …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 9, Issue 1, 2023 · pp. 1–6 Read article
-
A Predictive Model on Pipeline Corrosion
Abstract: A comprehensive mathematical model is developed to predict corrosion rates in pipeline. The specimenused for this design is coupons (mild steel). Four containers with different solvents of 0.5 concentrationof nitric acids, 0.5 concentration of HCl, fresh water, and saltwater respectively were provided, andthe four paired coupons were placed inside the solvent for seven days. Each day, the coupons wereremoved, washed, dried, weighed, and placed back into the solvent. The result …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 17–26 Read article
-
Consumers Behavior Towards Organic Food Products (Fruits and Vegetables) in Panchkula City
Abstract: Organic is a production system that sustains the health of soils, ecosystem and people. It relies on ecological processes rather than use of inputs with adverse effects. Organic agriculture is a blend of tradition, science, and innovation. Organic farming brings agriculture processes and nature together. There is a great need to develop Organic production in India and this can be possible with an efficient marketing system. This paper is designed …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 1, 2019 · pp. 1–13 Read article
-
“Bridging the Gap: Nanotechnology& Role inTissue Engineering”
Abstract: The multidisciplinary field of tissue engineering combines biology, engineering, and materials science to repair, replace, or regenerate damaged tissues and organs. In it, the artificial or substitute tissues are implanted to imitate the operations of the damaged tissues. In the past, attempts were made but weren’t satisfactory. Nanotechnology has the potential to modify biological functions and strengthen the properties of scaffolds. This review emphasizes on the need and impact of …
Published in International journal of Nanobiotechnology · Vol. 9, Issue 2, 2023 · pp. 10–17 Read article
-
Performance of High Volume Fly Ash Concrete Using Local Power Plant Fly Ash
Abstract: Total production of fly ash in Indian Thermal Power plants is approximately 160 million tons annually. Except some super power plants, the quality of fly ash is said to be inferior in most of the power plants. The suitability of fly ash from local power plants for production of high volume fly ash (HVFA) concrete is not tested so far. The aim of the present investigation is to ascertain whether …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 1, 2015 · pp. 07–13 Read article
-
Compatibility of Nanobiocide as Wood Preservative with Thermosetting Resin used as Adhesive for Plywood Manufacturing
Abstract: The study objective was to develop a wood preservative by nano form of Copper oxide, Zinc oxide and Copper sulphate for wood based panel products to make the system with a lesser amount of toxicity. Wood preservatives are products used for the safeguard of wood from deterioration or damage caused by detrimental organisms (for example; fungi, moulds or pests). Nanotechnology presents a notable opportunity to boost the field of wood …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 1–6 Read article
-
Enhancement of Fire Retardancy Properties of Plywood by Incorporating Silicate, Phosphate and Boron Compounds as Additives in PMUF Resin
Abstract: Wood is one of the supreme sustainable, naturally growing materials that consist principally of combustible organic carbon compounds. Since plywood are widely used now a day especially in buildings, furniture and cabinets. Since the demand of plywood with fire retardancy properties has been increasing over last years, the objective of this study is to improve the fire retardancy of Wood Panel Products by adding Tricresyl phosphate, Di-Sodiumocta Borate and Sodium …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 11–15 Read article
-
Environment Friendly, Exterior Grade Resin Adhesive from Phenol-Animal Glue Formaldehyde (PGF)
Abstract: Phenoplast and aminoplast based resins are the important adhesive for the manufacturing of marine grade, shuttering and moisture resistance plywood. Environmental concerns and higher cost of petroleum based resins have resulted in the development of technologies to replace phenol partially by biomaterials for the manufacturing of resin adhesive. Natural bio-based materials such as tannin, CNSL (cardanol), lignin soya etc. are used as partial substitution of phenol. This paper presents the …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 16–22 Read article
-
Manufacturing of BWP-Grade Plywood from Resin Adhesive Using Animal Protein (Glue) by Partial Replacement of Phenol
Abstract: Abstract This paper presents the development of plyboard using phenol–glue–formaldehyde (PGF) resin and their basic mechanical properties. Phenoplast and aminoplast-based resins is the important adhesive for the manufacturing of boiling water proof (BWP) grade, shuttering and moisture resistance plywood. Environmental concerns and higher cost of petroleum-based resins have resulted in the development of technologies to replace phenol partially by biomaterials for the manufacturing of resin adhesive. Natural bio-based materials such …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 Read article
-
FABRICATION AND EVALUATION OF VINYL ESTER RESIN BASED HYBRID COMPOSITES
Abstract: Jute is most widely used natural fiber in combination of various polymer because of easy availability, low environment impact, low density, low production cost, satisfactory mechanical properties and usage in wide range of applications. Mechanical properties of fibers are depending upon various factors such as fiber length, fiber orientation, fiber contact etc. In the present study, composite of Jute (J) and Glass fiber (G) have been fabricated using hand lay …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 26–31 Read article
-
Development of PVC Flute and Acoustic Testing for Commercial Production
Abstract: Flute is a musical instrument generally made of bamboo. Bamboo flute has less life and high price. Thus more durable material can be used which cannot be affected by environment. The PVC is most popular material which possesses these qualities and also cost effective. However, it should produce same pitch quality. This work focused on an idea to develop a high quality PVC pipe flute. A simple drill is used …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 27–34 Read article
-
Fabrication of a Novel and Efficient Radiation Grafted Functionalized Polymer Adsorbent and Investigation of its Applicability in the Adsorptive Removal of Cr (VI) Ion from Aqueous Solution
Abstract: The grafting of glycidyl methacrylate (GMA) onto non-woven polyethylene (PE) fabric was accomplished using a radiation-initiated grafting technique. The grafted textiles were allowed to react using triethylamine to create functioning amine groups. Upon bond formation yield, the impact of grafting intensity has been examined. Utilizing the appropriate technologies, such as FTIR, TGA, and SEM, the adsorbents were rigorously examined. There was evidence of GMA grafting and diamines according to FTIR, …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 1–15 Read article
-
Review of Composites formed of Thermoplastic as Organic Fibers
Abstract: Composites made of structural monomers gave rise to thermoplastic polymers (TMCs). Due to their usage of a thermoplastic matrix, these materials really aren't chemically reactive. TMCs may be remoulded without degrading when heated and become softer. They harden into the final shape when they cool. Thermoplastic materials bonded with plant fibers may one day be used to create impact- absorbing structure for renewable power. Its impact features of organic fiber-reinforced …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 28–33 Read article