Search
1136 articles for “Models”
-
Methodology Development for Lubricant Selection for Steam Turbine Bearing Using GTA
Abstract: Lubrication of two rubbing surfaces is required so that wear and tear is minimum. There are a lot of additives used to improve the lubricity of the lubricants. At present steam turbines are used to generate electricity from coal. A lot of lubricant is supplied to turbine bearings so that friction is minimized and also the wear and tear also. A lot of manufacturers are producing lubricants with different properties. …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 26–38 Read article
-
Computation of Gas Turbine System as Renewable Energy Conversion Mechanisms
Abstract: In the present work thermo-economic analysis of a cogeneration cycle is carried out so that any power generation industry can choose best power generation system out of the choices available with organisation. Mathematical modeling for the cost evaluation of each component is developed and results are obtained with computational programming tool EES (Engineering Equation Solver). Form results it is being found that with change in combustion chamber outlet temperature or …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 10–15 Read article
-
Thermal and structural properties of surface treated ragweed fiber reinforced biodegradable polylactic acid biocomposites
Abstract: Natural fiber-reinforced composites (NFRC) are becoming more popular as technological advance recognizes the need for eco-friendly materials. This work presents Giant ragweed (Ambrosia trifida) as a new composite reinforcement material into polylactic acid (PLA) matrix to form novel natural fiber-reinforced composites. Different types of retting techniques are utilized, and hydrogen peroxide retting is proven to provide the most optimized properties. The fibers are taken through subsequent extraction and grinding processes. …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 13–31 Read article
-
Evaluation of Antimicrobial Efficacy of Photogenic Iron Nanoparticles Against Xanthomonas campestris
Abstract: This study investigates the antimicrobial efficacy of photogenic iron nanoparticles (FeNPs) against Xanthomonas campestris, a notorious plant pathogen causing bacterial spot disease in various crops. The synthesis of FeNPs was achieved through a facile and eco-friendly green synthesis approach, utilizing a plant extract as a reducing and capping agent. The resulting photogenic FeNPs were characterized using various analytical techniques, confirming their size, morphology, and composition. The antimicrobial activity of the …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 37–54 Read article
-
Effect of Fly Ash Cenosphere on Electric Properties of Polypropylene
Abstract: Present work deals with findings on electrical properties of cenosphere filled polypropylene composites. Frequency dependence of the dielectric constant (ε’) of the composite samples was carried out at ambient temperature. A theoretical model is proposed for the electrical conductivity of porous polypropylene/cenosphere composites. Role of addition of these cenosphere particles on electrical properties such as dielectric constant, tanδ, dc conductivity and ac conductivity were investigated. Increase of fly ash cenosphere …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 7–19 Read article
-
Developments of Photonic Ferroelectric Ceramic Compose
Abstract: This article is a study of imposed interposed crystal allotropic modification underexposure of electricity. Ferroelectric photonic ceramic powder and films are usual studied in preparation from adoptive transduction in the same crystal based on electrical gradient. Ferroelectric ceramics and thin films used to be processed by the sol-gel method, where empirical variables of interest have been their chemical composition, constituent phases, and microstructure. Functional attributes made metal oxide compose like …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 37–44 Read article
-
Finite Element Analysis of Composite Pressure Vessel with Non-Geodesic Fiber Trajectory In view of Friction Factors on Cylinder and End Domes
Abstract: Composites are materials created by dissimilar materials with a view to improve the properties or to create materials with desired properties. Progressive Fiber Polymer Composites have developed as an essential class of industrial materials for load carrying applications with well-rounded properties for many industrial and social applications. Structures like pressure vessels, pipes and motor casings made-up of Filament Winding technology are widely used in aerospace applications. Conventionally, pressure vessels were …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 9–21 Read article
-
Plastics Product Design and Analysis
Abstract: Product design of a commonly used articles like key-chains is to make it more attractive, user friendly, cost effective yet durable and providing longevity. Therefore, this work deals with the designing of optimized 3D model of key-chain if suitable shape and size and doing its analysis in Moldflow analysis software to study the material flow behaviour, impact of processing parameters on the product and possible defects after one complete cycle …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 2, 2016 · pp. 31–34 Read article
-
Numerical Simulations on Suitability of Blending Indian Coal during Normal Air Combustion
Abstract: The development of the country’s economy in the past decade has increased the energy consumption in India. The major source of energy in our country is combustion of fossil fuel i.e. coal. The research on pyrolysis of coal and other fossil fuels is related to unsteady state, one dimensional, variable property model of transport phenomena with inclusion of heat, mass and momentum transfers. In the present research work mainly aimed …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 1, 2018 · pp. 20–27 Read article
-
Experimental Investigation of Visco-Elastic Behavior for Ecovio F Film C2203 Biopolymer Melts
Abstract: The visco-elastic behavior of biopolymers fluid are significantly interested in their internal structure, thus, it has been experimentally investigated for various industrial applications. This paper studies the characterization of (Ecovio F Film C2203) biopolymer because of their characteristics and importance in different fields of environment and health. Two form of rheometers instruments have been used at temperatures between (140 - 220) ˚C to describe the visco-elastic behavior of (Ecovio F …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 24–33 Read article
-
Viscoelastic Properties of Polymer Nanocomposites with Polydispersity in Nanoparticle Sizes
Abstract: The viscoelastic properties of polymer nanocomposites are investigated as a function of the size distribution of nanoparticles, the nature of interactions and results are compared with the pure polymer melt. We modeled our PNCs with two sizes of nanoparticles and polymer blends and four different cases with different polymer-nanoparticle and nanoparticle-nanoparticle non-bonded interactions. We have observed the enhancement in properties is not only due to the addition of nanoparticles but …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 2, 2019 · pp. 42–52 Read article
-
Generation of Electricity with the Help of Speed Brakes
Abstract: Electricity is produced by replacing the conventional speed breakers with some simple mechanism. As vehicles pass over the speed breakers, they spin the rollers which are connected to a generator which in turn generate electricity. This method is an effectual way to produce electricity as the numbers of vehicles on the road are ever increasing. Also, the price of fabrication of the model is less. It can be effectively placed …
Published in International Journal of Mechanics and Design · Vol. 3, Issue 2, 2017 · pp. 1–6 Read article
-
Review Study on Experimental Investigation of Heat Transfer Using Al2O3 and CuO Nanoparticles with Water as Base Fluid Through Circular Tube of Heat Exchangers
Abstract: A colloidal mixture of nanometric particles (<100 nm) in a base liquid called nanofluid, which is the new generation of heat transfer fluid for various heat transfer applications where the transport characteristics are substantially higher than the base liquid. This review summarizes and analyzes the empirical correlations for the effective thermal conductivity and the dynamic viscosity of the nanofluid on the basis of experimental data and the theoretical model available …
Published in International Journal of Mechanics and Design · Vol. 3, Issue 2, 2017 · pp. 17–23 Read article
-
Performance Analysis of Simple Air Standard Cycle
Abstract: In this study, the execution examination of the straightforward Brayton cycle is considered. The net power and aggregate productivity of framework are picked as the execution criteria. The variable parameters chosen for investigation are the compressor weight proportion and encompassing temperature. The other variables are accepted consistent. The conditions for ascertaining the force and productivity are defined as an element of these choice variables. Accordingly, the created model has been …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 2, 2018 · pp. 1–6 Read article
-
Optimization of Process Parameters of GMAW for Penetration, Toughness and Tensile Strength by using Taguchi Method
Abstract: Aluminum and its alloys are having variety of applications in Aircraft, food processing etc. Moreover; the use of Aluminum and its alloys are increasing day by day due to its specific properties, like light weight, high strength, and excellent corrosion resistance. However; the present study is planned to analyze and optimize the aluminum weld joint characteristics like tensile strength, penetration and toughness by using Gas Metal arc welding (GMAW) welding. …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 1–9 Read article
-
Effect of Burr Height in Drilling Low Carbon Steels for Different Drill Point Angles
Abstract: In the present work low carbon steel have been used to observe the burr height at the exit end of the workpiece of a drilled hole under different machining conditions. Three uncoated 12 mm diameter HSS twist drills are used. These drills have different drill point angles, i.e., 118°, 100°, 80°. All the experiments are carried out on a CNC milling machine with and without the application of coolant. Cutting …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 24–37 Read article
-
CFD Analysis on Exhaust System of a Car
Abstract: The pollution and global warming is due to air pollution. It is to be noted that air pollution is mainly caused by the toxic gases from the exhaust of the automobiles. Only 30% of the fuel is converted into energy source to run the engine remaining 70% of fuel is of un-burnt hydrocarbon, carbon monoxide and nitrogen oxides. From modified catalytic converter, noise level will decrease. Here, the performance of …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 38–50 Read article
-
Review on Thermoelectrical Generator and Software Analysis of Exhaust System
Abstract: In this century global warming is a very concerning issue. Vehicles are day-by-day increasing on roads, which emits harmful hot gases to environment. Due to exhaust gases and unwanted pollution TEG is a concept to utilize the heat energy of an engine for other works purposes. A major part of energy is being engaged in such issues. Here a study of conservation is being followed. TEG thermo-electric generator is a …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 2, 2020 · pp. 38–45 Read article
-
Remotely Operated Underwater Vehicle (ROV): State of the Art
Abstract: This study focuses on the analysis and development of Remotely Operated Underwater Vehicles (ROVs), encompassing their modeling, design, and control systems. It also addresses the inherent challenges related to their structural limitations, durability, and ease of operation. ROVs are robotic systems that can perform tasks in hazardous offshore environments and are equipped with various sensors to collect data. The objective of this paper is to examine the development of various …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 1, 2023 · pp. 24–28 Read article
-
Enhancing the Heat Transfer in the Thermal Chimney by Attaching the Fin under CFD Analysis
Abstract: The primary and secondary heaters in heat exchangers were numerically evaluated at nominal temperatures of 140°C for the primary heaters, 100°C for the secondary heaters, and 20°C for the ambient temperature in order to validate the design idea for enhancing the air temperature. The “convective heat transfer” of air in a thermal chimney built to laboratory size using two different types of electrical heaters and a rectangular cross-section of constant …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 2, 2023 · pp. 9–26 Read article