Search
1474 articles for “experience”
-
Prediction of Compressive strength of Periwinkle Shell Aggregate Concrete Using a Quadratic Polynomial Function
Abstract: In this study, a mathematical model is developed to predict the compressive strength of normal concrete made with periwinkle shell as coarse aggregate using a quadratic polynomial function. The response function is expressed as a multivariable function of the proportions of the component materials (water, ordinary Portland cement, sand and periwinkle shell). A total of thirty experimental runs were used to demonstrate the applicability of the mathematical model developed. The …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 10–21 Read article
-
Evaluation of The Resistance of Concrete by Partial Replacement of Coarse Aggregate with Steel Slag and Cement with Bentonite Powder
Abstract: According to the WHO, concrete is the third most consumed material by humans after food and water. Concrete consists of cement, coarse aggregate, fine aggregate and water. In the production of cement, carbon dioxide is released into the environment, which becomes a big problem for environmental protection. Therefore, there is a need to modify the cement with some natural materials with pozzolanic properties. The aggregates, which are extracted from natural …
Published in International Journal of Concrete Technology · Vol. 8, Issue 1, 2022 · pp. 21–29 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article
-
Exploring the Integration of Recycled Waste Materials in Concrete: A Comprehensive Overview
Abstract: The utilization of recycled materials from construction sites has experienced a notable increase in recent times, driven by the principle of efficient resource usage established by the International Council of Building in 1994. Recycled materials, including recycled concrete aggregate or brick aggregate sourced from construction and demolition waste, waste glass from municipal waste or recycled sources, and gypsum from gypsum boards, are being increasingly employed as substitutes for primary raw …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 26–34 Read article
-
Condition Assessment of Structures Using Vibration Technique
Abstract: Structural Health Monitoring grasps the Promise for enhancing the structural performance with an outstanding cost/benefit ratio. Condition assessment is a technique used in health monitoring in the damage detection, to ensure the serviceability and the durability of the structures. In the present report, condition assessment of the structures using low frequency technique is being completed through experimental modal analysis and computational analysis software ANSYS 9.0 over structural elements beam and …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 36–46 Read article
-
Optimization of Compressive Strength of Segmental Interlocking Stones
Abstract: The failure of most segmental interlocking stones used as pavement materials is traceable to lack of knowledge of the mix ratios that would optimize the compressive strength of the end products. In this study, the compressive strength was optimized based on Scheffe’s simplex lattice approach. The reliability of model developed was investigated using F-statistic and was found to be adequate. A computer program written in basic language was used to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
Taguchis Parameter Design Approach to normal cement concrete mixture proportioning
Abstract: This paper presents the results of the optimization of normal cement concrete mixture using Taguchi approach. The Taguchi experiments were designed using an L9 orthogonal array with three factors and three levels each. The water-cement ratio (W/C), total aggregate-cement ratio (TA/C) and total aggregate-water ratio (TA/W) were treated as the control factors. The effects of the water-cement ratio, total aggregate-cement ratio and total aggregate-water ratio on the compressive strength were …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 23–29 Read article
-
A STYDY ON MECHANICAL PROPERTIES UNDER THE INFLUENCE OF FELDSPAR ACTIVATOR ON GEOPOLYMERIZATION OF REDMUD AND GGBS
Abstract: It is well known fact that the Ordinary Portland Cement (OPC) is most important construction material. Keeping in view the hazardous effects of Portland cement on environment, efforts are being put to reduce use of cement in concrete with its partial or full replacement by various waste materials such as Red mud (RM), Ground Granulated Blas Furnace Slag (GGBFS or GGBS), Flyash, Silica fume etc.. Geopolymer Concrete (GPC) is a …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 1–8 Read article
-
Effects of granulated waste glass and micro steel fiber on shear strength parameters of sand
Abstract: During the construction of the various structures, soil strength plays a vital role in structural performance. Hence, soil improvement techniques are needed to improve soil strength as well. This study aimed to improve shear strength of sandy soil using Granulated waste glass (GWG) and Micro steel fiber (MSF). In order to apply this idea, there have been taken two kinds of sandy soil such as fine sand (locally available in …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 35–42 Read article
-
Farming on Phone: Understanding Cotton Farmers’ Intentions and Feasibility to Adopt ICT-based Agro Advisory Services in Maharashtra, India
Abstract: The use of ICT tools in the agriculture sector for rural farmers has emerged as a potential for empowering farmers and improving their livelihoods as the phone-based agro-advisory services provide farmers with access to tailored relevant information to help them make better decisions about agricultural activities, crop yields, and better management of natural resources. However, understanding the impact of social structure on ICT adoption and perceived impacts is important to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 2, 2022 · pp. 14–25 Read article
-
Bearing Capacity of Footing on Reinforced Bottom Ash
Abstract: Tons of coal has been burned daily to meet the energy requirement. As a consequence, huge amount of coal ash has been produced as waste material. At present day, recycling and reuse of waste material is favorable and also economical from engineering aspect. In the present experimental study, an attempt has been made to study the bearing capacity of footing on geotextile reinforced bottom ash. From the results obtained in …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 2, 2022 · pp. 48–55 Read article
-
Advancing the Strength of Expansive Soil using BioEnzyme and Pond-Ash
Abstract: Expansive soils are problematic and prone to ground movements, which can seriously harm underlying structures and reduce their carrying ability. The expansive nature of soils is activated by moisture fluctuations, causing it to expand and contract. There are many stabilizing chemicals that have been used to treat Black Cotton soil, including lime, cement, and fly ash. Recently, it has become clear that using bio-enzymes to stabilize soil has a lot …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 1, 2023 · pp. 18–27 Read article
-
Novel Approach to Improve Stack Effect in High Rise Buildings
Abstract: This paper aims at improving stack effect in high rise buildings using an innovative approach. Parameters influencing stack effect in high rise buildings are identified based on standard theory and practice. A new draft number for estimating stack effect in high rise buildings is derived using Buckingham-П theorem. Airflow data of a university high rise building is considered in estimating stack effect. The draft number developed is enclosed in ANSYS …
Published in International Journal of Structural Engineering and Analysis · Vol. 1, Issue 1, 2015 · pp. 9–17 Read article
-
Strain Life Approach for the Fatigue Evolution Model of Concrete under Constant Amplitude Bending Fatigue Loading
Abstract: Strain life approach for the fatigue evolution model of concrete under constant amplitude bending fatigue loading plays a very important role in the material properties such as the fatigue strain, fatigue modulus and fatigue damage, presented in this paper by the nonlinear fatigue evolution model, and the hypothesis of recycle-ratio-related fatigue strain amplitude that causes stiffness degradation and inelastic deformation. The fatigue evolution model of concrete under constant amplitude bending …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 1, 2019 · pp. 35–60 Read article
-
Preparation of Layout and Estimation of Sports Complex using Autodesk AutoCAD and Microsoft Excel Software: Review
Abstract: Sports, recreational activities are now widely accepted as fundamental elements of a good life. As sports being an important aspect of social life of human being, it brings in health and fitness followed by entertainment and social gatherings. In the process of development of infrastructure required for the betterment of sports in the society, the availability of sports complexes and sports ground becomes essential. A well designed infrastructure of a …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 2, 2021 · pp. 19–25 Read article
-
MODAL ANALYSIS OF CONVENTIONAL RCC STRUCTURE WITH STEEL BRACING
Abstract: It is a well-known fact that high rise reinforced structures are vulnerable to lateral loadings from things like earthquake and wind stresses. Bracing systems have the excellent benefit of adding just a tiny amount of bulk to the structure while significantly enhancing its performance. Building modelling is done both with and without a bracing system in this study. Analysis that is both linear and dynamic is being done. The structure …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 1, 2023 · pp. 48–62 Read article
-
Thermal Performance Evaluation of a Prototype Building Utilizing Composite Construction and LGS-Ferrocement Sandwich Wall Panels
Abstract: In India, there is a noticeable surge of interest in embracing progressive construction techniques, including modular precast construction, light gauge steel (cold-formed steel), and precast Ferrocement composite structures. These advanced methods offer a sustainable approach with a significantly reduced carbon footprint compared to traditional reinforced concrete (RCC) construction. Moreover, they present several advantages, such as expedited construction, minimized material transportation, cost-effective labor, and accelerated project completion. An ingenious technology has …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 1, 2023 · pp. 11–20 Read article
-
Effect of Binder Type, Binder Content, Aggregate Gradation, Temperature and Air Voids on Rutting Susceptibility of Bituminous Mixes
Abstract: Abstract This paper presents an experimental investigation carried out to evaluate the rutting susceptibility of bituminous mixes. The effect of binder type and content, aggregate gradation and temperature are evaluated by means of a wheel tracking test. Two conventional VG 30 and VG 40 binders and one SBS polymer modified binder PMB 40 are used. Three types of aggregate gradations for bituminous concrete (BC), a dense graded mix commonly used …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 1, Issue 2, 2015 · pp. 31–39 Read article
-
Cyclic Loading Over “Stress Behaviour of High Strength Fibre (Steel and Glass) Reinforced Concrete
Abstract: Construction spectrum is growing as it has never been before; there is always something under new construction. It is thus very much important to use updated materials in construction to improve usability, workability and durability, along with the increase in characteristic strengths of material with respect to high rise structures specially. Concrete is one such material obtained from mixing of various materials. Concrete is good at compressive strength but shows …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 1, 2017 · pp. 17–31 Read article
-
An Investigation into the Mechanical and Strength Properties of Rubberized Asphalt Concrete
Abstract: In this study, the suitability of large rubber chunks from shredded tires as aggregates in cold mixes for road construction is investigated. The rubber was used as an additive to the asphalt binder. Thirty percent of rubber by weight was introduced into the binder at a higher temperature and the rubber was allowed to react with the binder. It was shown among other findings that for various particle sizes, the …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 1, 2018 · pp. 11–16 Read article