Search
1475 articles for “Performance”
-
FEASIBILITY STUDIES ON A DISTILLATION CASCADE FOR PRODUCTION OF ULTRA-HIGH PURITY TRICHLOROSILANE
Abstract: Elemental silicon is the backbone of the electronics and the solar photovoltaics industry in the present times. This work examines the purification of a silicon precursor such that the total impurity content in it is limited to a few parts per million. Trichlorosilane (TCS) is one of the most important precursors in the production of electronics grade elemental silicon. This is because of the relative ease with which crude trichlorosilane, …
Published in International Journal of Chemical Separation Technology · Vol. 4, Issue 1, 2018 · pp. 19–35 Read article
-
Investigating study on flux enhancement techniques in a Nanofiltration pilot plant – An Experimental overview
Abstract: Water consumption and utilization in chemical allied industries is increasing progressively and global availability of fresh water is reducing. Reclamation of water from various industrial waste streams is play very vital role to overcome the current situation of water scarcity. Various conventional treatment methods are available for water reclamation. The performance of the membrane separation process, in terms of flux and rejection of membrane is directly influenced by the resistances …
Published in International Journal of Chemical Separation Technology · Vol. 4, Issue 2, 2018 · pp. 27–34 Read article
-
Current applications for functionalized silver nanoparticles: A Review
Abstract: Nanotechnology in today’s scenario plays a pivotal role in various fields. Metal nanoparticles are becoming important in various disciplines of catalytic application, environmental remediation, etc. Functionalization of metal nanoparticles has been performed either by biomolecules or chemical functional groups that not only provide stability to the nanoparticles but also surface functionalities which makes them important for various applications. Silver nanoparticles are functionalized with amino acids in order to achieve a …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 1, 2020 · pp. 6–13 Read article
-
Resourced morphological issued to gallium
Abstract: AbstractThis article summarizes some formatives over gallium (Ga) form associated minerals and waste electronic goods. Geological resource has considerations over sea-in-basins performor natural beneficiation from products of volcanic disruptions. Ga as by-product has extracted from fly ash, slags, scraps and wastes, mine tailings, mineral deposits those associate Ga, wastes from Zn, Al plants, flue dusts, and coal ashes. Leaching methods are more protocoled than pyrolysis. Locked in quartz Ga deposits …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 2, 2020 · pp. 12–16 Read article
-
Comparison of Liquefied Natural Gas Plant Unit Failure
Abstract: The comparison of some liquefied natural gas plant unit failure was investigated and the unit considered in terms of identification of the component failures. The units are Reboiler, Stripper, Cooling, Compressor, Acid Dehydration, Heat Transfer, Expander and Liquefaction units. The components of interest were monitored in terms of their performance as well as the failure rate of heat transfer unit > cooling unit > acid dehydration unit > stripper unit …
Published in International Journal of Chemical Separation Technology · Vol. 7, Issue 2, 2021 · pp. 11–22 Read article
-
Application of Hengstebeck's Model in Multicomponent Crude Oil Distillation Design
Abstract: Mathematical models were developed for the analysis of the Atmospheric Crude Distillation Unit of Port Harcourt Refinery in Nigeria. The resultant system of equations was solved using the method of matrix inversion using Mathlab software and the models predicted with reasonable accuracy composition of side draws (different fractions) and temperatures. Also, the effect of process parameters on the overall performance of the unit was studied. In addition, the study applied …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 1, 2022 · pp. 13–19 Read article
-
Fabrication and Characterization of Paper-Sludge Reinforced Polypropylene Composites
Abstract: The purpose of this research was to identify some physical and mechanical characteristics of polypropylene (PP) composites reinforced using various paper sludge (PS) and PP combinations, as well as to assess the performance of the coupling agent. The physico-chemical characteristics of the waste sludge material from paper manufacturing wastewater treatment sludge (PS) were investigated. The physical and mechanical properties of the composite were examined in the experiment using three levels …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 15–26 Read article
-
Pinch analysis of Cumene process using Aspen Energy Analyzer
Abstract: This article is divided into two parts. In the first part a process flow diagram for the production of cumene is designed with Aspen HYSYS. Cumene obtained is 98.78% pure and the designed plant is safe to environment with less emissions. In the second part heat exchanger networks (HEN) was developed for the process plant by performing pinch analysis using Aspen Energy Analyzer. Retrofit analysis was applied to find an …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 1, 2015 · pp. 21–30 Read article
-
Case Studies On Synthesis Of PLLA Bioplastic Starting From Food And Agricultural Wastes
Abstract: Polylaevo Lactic Acid (PLLA) is an excellent biopolymer that is biodegradable and has characteristics exactly similar to polystyrene. However, at present, the market price of this biopolymer is significantly higher than polystyrene and other synthetic plastics. The major hindrances to the large scale manufacture of this polymer are the lack of availability of a cheap raw material and the overall economy of synthesis of lactic acid from the same. In …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 1, 2015 · pp. 1–13 Read article
-
Statistical and Artificial Neural Network for the Determination of Thermo-Physical Properties of Fomoditine Drug Using Mixed Hydrotropy
Abstract: The experimental determination of thermo-physical properties of fomoditine drug–mixed hydrotrope concentration mixture is very time consuming as well as tedious process. Any tool helpful in estimation of these properties without experimentation can be of immense utility. In present work, other tools of determination of properties of fomoditine drug–mixed hydrotrope concentration blends were tried. A traditional statistical technique of linear regression (principle of least squares) was used to estimate the specific …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 2, 2015 · pp. 1–6 Read article
-
Electrolytic Degradation of Uric Acid Using Nickel Electrodes in an Unpartitioned and Partitioned Batch Cell
Abstract: Electrolytic degradation of an aqueous solution of uric acid (UA) was performed in an unpartitioned and partitioned electrolytic tank using nickel electrodes. The concentration of uric acid was measured using a UV–Visible spectrophotometer, and the effect of operating parameters such as voltage, concentration of uric acid and the supporting electrolyte were investigated. It is found that the concentration of uric acid decreases with time in both the unpartitioned and partitioned …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 1, 2016 · pp. 1–10 Read article
-
Induced codeposition of Ni-W alloy coatings using glycerol as additive and their characterization
Abstract: As a promising coating material to replace hard chromium coating, the development of nickel–tungsten (Ni-W) alloy coatings of good corrosion protection is of great interest in surface coating technology. Further, the effect of plating variables, including additive on the composition of alloys of induced co-deposition is more vagarious than in other types of alloy deposition. In this regard, an alkaline citrate bath has been formulated for electrodeposition of Ni-W alloy …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 1–9 Read article
-
Numerical investigation of hydrodynamics of batch crystallizer
Abstract: In this work, hydrodynamics in a draft tubebatch crystallizer is analysed computationally using Computational fluid dynamics (CFD). The CFD simulations are performed using multiple reference frame (MRF) with sliding mesh approach in transient condition for flow time of 5s using the standard k-ε turbulence model. The flow-field in batch crystallizer is quantified by calculating time averaged velocity profiles along the horizontal line and by analysing the temporal variation of liquid …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 1, 2017 · pp. 24–35 Read article
-
The new method of mixing in an advanced ceramics processing
Abstract: Ceramics for today’s engineering applications can be considered as advanced, new or fine, and utilize highly refined materials. These new or advanced ceramics, when used as an engineering material, possess several properties which can be viewed as superior to metal-based systems. These properties place this new group of ceramics in a most attractive position, not only in the area of performance but also cost effectiveness. These properties include high resistance …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 1, 2019 · pp. 43–47 Read article
-
Separation of p-xylene from xylene isomer mixtures within a single stage porous batch cooling crystallizer
Abstract: Crystallization based separation of p-xylene from its isomer mixtures were mostly accomplished in stirring crystallizers, suspension crystallizer and scrapping crystallizer followed by centrifugation. In this work, separation process for p-xylene, where both crystallization and separation of p-xylene in a single batch crystallizer, was performed. Upon cooling, p-xylene, which has the higher melting point than other xylene isomers (o-xylene and m-xylene), crystallizes first. Xylene mixture samples were crystallized at a lower …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 1, 2020 · pp. 62–78 Read article
-
Influences of Layered Silicate Modification and Compatibilizers on the Properties of Polypropylene Nanocomposites
Abstract: In this study, polypropylene (PP) organo-layered silicate nanocomposites based on organo-muscovite (OM) were fabricated using co-rotating twin-screw extruder. Polypropylene grafted maleic anhydride (PPMA) and potassium succinate modified polypropylene grafted maleic anhydride (PPKS) were used as a compatibilizer in the nanocomposite system. The influences of layered silicate modification and compatibilizers on the morphological, mechanical, thermal and rheological features of PP/PPMA/OM and PP/PPKS/OM nanocomposites were examined. TEM micrographs were made which showed …
Published in International Journal of Chemical Engineering and Processing · Vol. 7, Issue 1, 2021 · pp. 36–44 Read article
-
Effect of Elephant Grass for the Remediation of Contaminated Swampy and Clay Soils Environment
Abstract: The research on the effect of Elephant grass and effectiveness to enhance remediation of crude oil polluted soil environment was studied. The experiment carried out in order to ascertain the performance of the locally sourced braw material for remediation of the contaminated soil. The physiochemical parameters of the contaminants such as crude oil, as well as the elephant grass in powdered form, swampy and clay soils were determined in terms …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 25–30 Read article
-
Brain Tumor Detection using Machine Learning Methods-KNN, SVM, DT, RF
Abstract: Brain tumor is a major contributor to illness and death worldwide, and timely diagnosis is essential for successful treatment and improved outcomes Recent research has looked into the possibility of machine learning algorithms for detecting and classifying brain tumours in medical pictures. In this study, four commonly used machine learning algorithms (K-Nearest Neighbours, Decision Trees, Support Vector Machines, and Random Forests) were evaluated for their effectiveness in brain tumor detection. …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 2, 2023 · pp. 48–59 Read article
-
Suitability of Methyldiethanolamine (MDEA) and Piperazine (PZ) for Improving CO2 Absorption Efficiency Using Rotating Packed Bed (RPB) Technology: A Modeling and Simulation Study
Abstract: Carbon dioxide (CO2) capture and storage (CCS) is an essential technology for reducing atmospheric CO2 emissions and mitigating climate change, especially in fossil-fuel power generation. However, the high cost of CCS technologies has hindered their widespread adoption. In this study, we modeled CO2 removal using a rotating packed bed (RPB) technology using Visual Fortran and Aspen Plus software. We made use of a blended amine solution including different molar concentration …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 2, 2023 · pp. 9–15 Read article
-
Feasibility Study on Spent Pot Lining (SPL) as Raw Material in Cement Manufacture Process
Abstract: SPL is a waste material that comes free from the production of Aluminum industrial. SPL is separated in two fractions: a carbon-rich fraction referred to as “first cut” and a refractories rich fraction referred to as “second cut”. One commonly used solution is the processing of SPL fractions in cement kilns. The primary reasons for the cement producer to process the SPL are the reduction in raw material costs from …
Published in International Journal of Environmental Chemistry · Vol. 2, Issue 2, 2016 · pp. 18–26 Read article