Search
1120 articles for “properties”
-
Mechanical properties of Poly vinyl alcohol and Nitrocellulose blends.
Abstract: Mechanical properties of polyvinyl alcohol and nitrocellulose blends has been determined successfully via tensile strength, Young’s modulus, percentage elongation and impact strength. The blends of the respective polymers are in the ratio PVA:NC (90:10,80:20,60:40,50:0,40:60,10:90). There are good results from different blend ratios which include tensile strength PVA: NC 90:10 (16.98MPa) Young’s modulus 60:40 (0.71MPa). The highest percentage elongation was observed for 80:20 at 160.09%. The most elastic blend ration was …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 1, 2020 · pp. 54–59 Read article
-
EFFECT OF GLUCOSE ON PHYSICO-CHEMICAL PROPERTIES OF SOME SURFACTANT SOLUTIONS
Abstract: Physico-chemical and thermodynamic studies of some aqueous surfactant solutions were carried out by employing conductance and dye solubilization (UV-Vis absorption spectroscopy) techniques. From the above measurements, critical micelle concentration (CMC) and thermodynamic properties of micellization (ΔGomic , ΔHomic and ΔSomic) have been obtained for an anionic [Sodium dodecyl sulphate (SDS)],a cationic [hexadecyl trimethyl ammonium bromide, (HTAB)] and non ionic (Tween-20) surfactant solutions. Effect of mixing cosolute on CMC and thermodynamics …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 4, Issue 1, 2018 · pp. 1–22 Read article
-
Correlation Between CBR Values and Index Properties of Soils
Abstract: Presently India’s infrastructure is growing rapidly. Large number of new urban and lightly trafficked roads are being constructed or planned. The California bearing ratio (CBR) is the well known, common and trustful test currently used in road construction. The CBR values are used by the engineers to design the thickness of pavement layer to be laid on the top of the sub-grade. Laboratory tests like consistency tests, standard proctor test …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 2, 2017 · pp. 18–21 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article
-
Properties of Bentonite Stabilised with Fluorogypsum
Abstract: This paper presents the properties of the bentonite stabilised with fluorogypsum. For this purpose, commercially available bentonite and fluorogypsum were used in this investigation. The fluorogypsum content and the curing period were varied from 0% to 10 % and 0 to 28 days respectively. Compaction tests results reveal that the maximum dry unit weight increases and optimum moisture content decreases with the increase in the fluorogypsum content to the bentonite. …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 43–53 Read article
-
Re-characterizing of Asphalt Concrete Mix Design Properties Blended with Waste Engine Oil Fractions for Heavy Traffic. (Case Study; Stability and Density)
Abstract: Waste and rising cost of importing admixtures during construction have influenced research into better ways of recycling local waste and reduce cost of importation of admixtures. Waste Engine Oil are checked as non-bituminous and can be incorporated into asphalt concrete mix design. Different researches have shown that some waste/by-products can be included as additive in hot-blend black-top cement to acquire specific beneficial properties. It is on this basis that this …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 8, Issue 1, 2022 · pp. 14–17 Read article
-
Studying the Effect of Crumb Rubber Inclusion in the Mix Design Properties of HMA Pavement: A Case Study of Light Traffic
Abstract: Improving the performance of flexible road pavement has been one of the major concerns in highway engineering; these are due to the twin problems of temperature and oxidation that were observed to impede its performance during use. One the fundamental aim of this study is to explore the techniques of crumb rubber inclusion (in 0%, 5%, 10%, 15%, 20% and 25%), these severs as modifier to the mix design properties …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 1, 2018 · pp. 26–32 Read article
-
Fluctuation of the Viscoelastic Properties of Asphalt Concrete under Variable Strain Level
Abstract: The viscoelastic properties of asphalt pavement usually practices variable microstrain levels due to the mixed traffic loading throughout its service life. In the present assessment, asphalt concrete mixtures were prepared in the laboratory at optimum binder content, and compacted in a slab mold using the roller compaction. Beam specimens of 5.6 Cm depth, 6.2 Cm width, and 40 Cm length; have been extracted from the slab samples and subjected to …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 9, Issue 2, 2023 · pp. 8–16 Read article
-
Short Review on the Electronic Properties of High Electron Mobility Transistors for the Applications in Digital Communication
Abstract: In this review work, author has briefly reviewed on the relevant electronic properties to control the electrical properties of high electron mobility transistors (HEMTs). The electrical characteristics are reviewed corresponding to the microelectronic and Nanoelectronic HEMTs from the miniaturization point of view. Also, the effects of aluminium mole fraction, doping concentration and nano-layer thickness to control the drain current are reviewed. This work may be helpful to fabricate the electronic …
Published in International Journal of Digital Communication and Analog Signals · Vol. 4, Issue 2, 2018 · pp. 24–28 Read article
-
Impact of Annealing on Structural and Surface Properties of Nanostructured ZnO Thin Films
Abstract: ZnO thin movies with various grain size were developed on undefined quartz substrate utilizing turn covering technique. We have announced the impact of toughening temperatures on the basic and surface properties of ZnO thin movies. The surface properties were described by AFM. From XRD investigation, it can be seen that the FWHM diminishes with an expansion in strengthening temperature from 500 to 575ºC which is reflected in the expansion in …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 1, 2017 · pp. 33–37 Read article
-
Study of Isotropic Property
Abstract: This article is constitutive from as forged as well compounded form. Isotropy is uniformity in various orientations. Isotropy is composed of Greek isos meant by equal and tropos meant by way. Precise definable consequence is subjective to depend on material property i.e., same when tested in different directions. A common example of isotropy is inclusive as of glass, plastics, and metals. Alter subject area is studied as inequality, given by …
Published in International Journal of Energetic Materials · Vol. 7, Issue 2, 2021 · pp. 1–7 Read article
-
INVESTIGATIONAL STUDIES ON MECHANICAL PROPERTIES FOR FRPS COMPOSITES
Abstract: The fibre reinforced composite materials consists of fibres of significant stiffness and strength embedded in a matrix with distinct boundaries between them and these materials had better mechanical properties when compared to normal metals which are thought as better substitutes to metals and add strength and reduces weight of a given system.The strength of FRPSS varies basing on its constituents and composition of constituents. In marine field where high strength …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 1–6 Read article
-
Enhancing the Sensing Properties of Nanosensors for Detection of Gases
Abstract: In order to improve commercial gas sensors, many approaches have attempted to modify the sensing properties of metal oxide semiconductor gas sensors in order to achieve higher sensitivity and selectivity. Enhancements of the sensing properties of MOS sensor (Metal Oxide Gas Sensors) materials can be achieved by the development of sensors with nanoscale sizes and structures, such as nanoparticles, nanowires, nanorods etc.
Published in International Journal of Nanomaterials and Nanostructures · Vol. 1, Issue 2, 2015 · pp. 42–43 Read article
-
Study on the Properties and Applications of Thermoplastic
Abstract: Hot-applied thermoplastic is prepared for road deposition in a melting apparatus where the granular or block material is introduced and heated until it liquefies at temperatures exceeding 400F. When applied on asphaltic concrete, thermoplastic material develops a thermal bond via heat- fusion. A thermoplastic is a material, usually a plastic polymer, which becomes soft when heated and hard when cooled. Thermoplastic materials can be cooled and heated several times without …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 16–21 Read article
-
Effect of Fly Ash Cenosphere on Electric Properties of Polypropylene
Abstract: Present work deals with findings on electrical properties of cenosphere filled polypropylene composites. Frequency dependence of the dielectric constant (ε’) of the composite samples was carried out at ambient temperature. A theoretical model is proposed for the electrical conductivity of porous polypropylene/cenosphere composites. Role of addition of these cenosphere particles on electrical properties such as dielectric constant, tanδ, dc conductivity and ac conductivity were investigated. Increase of fly ash cenosphere …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 7–19 Read article
-
Microstructure Dependence of Electrical Properties in AgI- and Ag2S-Doped Glass Nanocomposites
Abstract: In this paper, we report the study of microstructure dependence of ion conduction for several AgI- and Ag2S-doped glasses and glass nanocomposites systems. The structure and electrical properties of these samples have been studied and the effects of formation of nanocrystalline phases on the electrical properties of these glasses are presented. The microstructure of these glasses was studied employing transmission electron microscope (TEM). The temperature dependence of dc conductivity shows …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 9–13 Read article
-
Analyzing the Effect of Rice Husk Ash & Quartz Powder on Mechanical Properties of Polypropylene Fiber Based Concrete Using Regression Analysis
Abstract: Several works were identified with sustainable development have uplifted the improvement of composite binders incorporating Portland cement, industrial, agricultural by- products and partial substitutions to aggregates. One of the most adverse effects of using cement is the emission of CO2 into atmosphere during production and it can be reduced with the effective use of cementitious materials. Several efforts were attempted to make use of supplementary cementitious materials to enhance the …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 51–57 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
Impact, Flexural, and Hardness Properties of AISI 1018 Mild Steel Butt Joint Welded using Gas Metal Arc Welding (GMAW) under Various Welding Parameters
Abstract: AbstractThe effects of welding parameters such as welding current, voltage, and travel speed on the impact, flexural, and hardness properties of AISI 1018 mild steel using Gas Metal Arc Welding (GMAW) were investigated. In this research, specimen sizes of 500 mm x 10 mm x 10 mm and 5.5 mm x 10 mm x 10 mm were fabricated according to ASTM standards. In addition, a v-groove had been prepared at …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 6–13 Read article
-
Investigating the Effects of Severe Plastic Deformation on Aluminium Alloy Properties: A Comparative Study
Abstract: Equal channel angular pressing is a metal forming process. It serves as a strengthening treatment through which ductile metals can be processed to refine their grain and subgrain structure. This process improves the mechanical performance of metals, including tensile strength, stress-controlled fatigue strength, and resistance to fatigue crack propagation. Equal channel angular pressing is one of the severe plastic deformation methods employed to produce ultrafine-grained materials. In this method, a …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 1, 2026 · pp. 26–43 Read article