Search
115 articles for “Bearings”
-
Isolation Technique in Bridge, Building
Abstract: Seismic Isolation is simple structural design approach to mitigate or reduce earthquake damage potential. It is easiest to see the principle at work by referring directly to the most widely used of these advanced techniques, known as ‘Base Isolation’. A base isolated structure is supported by a series of bearing pads, which are placed between the buildings and building foundation. Base isolation has now been used in numerous building in …
Published in International Journal of Construction Engineering and Planning · Vol. 2, Issue 2, 2016 · pp. 1–4 Read article
-
Evaluation of Strength in Natural Bricks by Using Mineral Admixtures
Abstract: In the construction field nowadays substructures and superstructure are adopted by bricks only for the framed type of structure and also load bearing wall adopted for bricks in super structure works. Last four decades in our Tamil Nadu more number of bricks were used for the buildings. In this work, it is decided to design an alternate to clayey soil with addition of stabilisers such as fly ash, rice husk …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 85–89 Read article
-
Correlation Between CBR Values and Index Properties of Soils
Abstract: Presently India’s infrastructure is growing rapidly. Large number of new urban and lightly trafficked roads are being constructed or planned. The California bearing ratio (CBR) is the well known, common and trustful test currently used in road construction. The CBR values are used by the engineers to design the thickness of pavement layer to be laid on the top of the sub-grade. Laboratory tests like consistency tests, standard proctor test …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 2, 2017 · pp. 18–21 Read article
-
Behaviour of Vertically Loaded Piled Raft
Abstract: In order to understand the load-settlement behaviour and load sharing of piled raft resting on sand soil, 1-g model tests were conducted.The parameter studied were the influence of pile spacing and number of piles. The testing program includes tests on models of unpiled raft and rafts on 4 and 9 piles. The model piles beneath the raft are non-displacement piles.The improvement in ultimate bearing capacity is represented by load improvement …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 1, Issue 1, 2015 · pp. 1–8 Read article
-
A REVIEW ON THE VARIOUS TYPES OF SOIL CONTAMINATION WITH REMEDIATION
Abstract: The paper deals about the plethora of soil contamination by the industrial activities or accidental leakage. Several contaminations of soils have been included in the paper and suggested remediation methods for the remediation of contaminated soil is also discussed in the paper. Rise of population growth leads to large amount of demand, which affects the industrial growth. The re use of waste or any other surplus additives and bio-surfactants for …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 30–37 Read article
-
Behaviour of Micropiles Groups Subjected to Vertical Loads
Abstract: Micropiles are used to reinforce soils and to support foundations. It may be installed in several directions through existing foundations so as to increase the bearing capacity of the soil and to reduce the settlement. The group effects of micropile groups subjected to vertical loads in granular soils have been investigated by many research workers. However the findings have been found to be inconsistent indicating contradictory group effects. Group behaviour …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 2, 2022 · pp. 1–13 Read article
-
Predicting the Influence of Permeability’s on Settlement of Shallow Foundation
Abstract: Foundation settlement rose as soil permeability increased, excess pore pressure increased with depth, and decreased as shear modulus increased. The expanding soil cycle (shrinkage and expansion) that is principally responsible for foundation settlement is strongly related to water content. The application of modeling and simulation was used to monitor the effect of various soil properties on foundation settlement. But the focus of this study is on Permeability including other soil …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 1, 2023 · pp. 36–54 Read article
-
Advancing the Strength of Expansive Soil using BioEnzyme and Pond-Ash
Abstract: Expansive soils are problematic and prone to ground movements, which can seriously harm underlying structures and reduce their carrying ability. The expansive nature of soils is activated by moisture fluctuations, causing it to expand and contract. There are many stabilizing chemicals that have been used to treat Black Cotton soil, including lime, cement, and fly ash. Recently, it has become clear that using bio-enzymes to stabilize soil has a lot …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 1, 2023 · pp. 18–27 Read article
-
Performance of Bricks and Brick Masonry in Aggressive Chemical Environment
Abstract: Abstract In India, the use of burnt clay bricks in dwellings is common since the ancient Indus civilization. In buildings, bricks are used in brick masonry, reinforced brick work and in some cases as coarse aggregate in the construction of foundation base. The performance of brick masonry depends upon the quality of bricks, quality of masonry work and the prevalent environmental conditions which have to be faced by the structure. …
Published in International Journal of Structural Engineering and Analysis · Vol. 1, Issue 2, 2015 · pp. 1–12 Read article
-
Rural Building Base Isolation for Seismic Protection Using LRB and Friction Isolator
Abstract: Over 50% of the population of India, which is still developing, lives in unreinforced masonry buildings. Masonry constructions perform poorly and can collapse suddenly because they are susceptible to seismic loads and loads acting out of plane. Building collapse not only destroys public property but also claims life. It has been demonstrated that base isolation approaches for these types of structures are advantageous; in the event of seismic forces, they …
Published in International Journal of Structural Engineering and Analysis · Vol. 8, Issue 2, 2022 · pp. 38–42 Read article
-
MODAL ANALYSIS OF CONVENTIONAL RCC STRUCTURE WITH STEEL BRACING
Abstract: It is a well-known fact that high rise reinforced structures are vulnerable to lateral loadings from things like earthquake and wind stresses. Bracing systems have the excellent benefit of adding just a tiny amount of bulk to the structure while significantly enhancing its performance. Building modelling is done both with and without a bracing system in this study. Analysis that is both linear and dynamic is being done. The structure …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 1, 2023 · pp. 48–62 Read article
-
Significance of Concrete Integrity in Pile Foundation:A Comprehensive Review
Abstract: Concrete integrity plays a vital role in the performance, durability, and safety of various structural applications. This comprehensive review examines the importance of concrete integrity and its implications on the piles through three different methods, as in modern day structures, pile foundations are widely used hence defects in pile will lead to problems to overall structural integrity. Concrete integrity is essential for ensuring the structural stability and load-bearing capacity of …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 1, 2023 · pp. 1–10 Read article
-
SEISMIC ANALYSIS OF BUILDINGS USING DIRECT DISPLACEMENT BASED DESIGN
Abstract: Seismic resilience in structural engineering is a paramount concern, particularly in regionsprone to seismic activity. This research investigates the seismic performance of reinforced concretestructures with shear walls, employing two distinct design methodologies: Direct Displacement-BasedDesign (DDBD) and traditional Force-Based Design (FBD). Utilizing advanced computational toolssuch as ETABS software and the Response Spectrum Method, a comprehensive comparative analysis isconducted across multiple seismic zones, including Zones III, IV, and V. This study also …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 2, 2023 · pp. 32–46 Read article
-
Towards a Geotechnical Input-Based Conceptual Cost Estimating Methodology for Highway Projects
Abstract: The trend in the literature reveals a wide range of innovative approaches which have been proposed to improve the accuracy of conceptual estimates. These techniques are usually based on differing analytical approaches. Although these techniques obtain estimates that closely approximate actual costs, the requisite time and resources to gather sufficient data or obtain relevant information during initial project stages may not be possible. The study proposes that for a road …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 8, Issue 2, 2022 · pp. 28–37 Read article
-
Predictive Evaluation of Erema Community Groundwater in Egi for the Purpose of Agricultural Use
Abstract: The investigation in this research is to study the developed sodium absorption ratio model for predicting and monitoring SAR concentration of Erema community groundwater by Ukpaka, 2016 given as, SAR = – + with coefficient of determination of that is modified in this research as + = 0 which is now the modified differential equation of sodium absorption ratio for Erema community it fitness in assessing SAR concentration. Validation of …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 2, 2017 · pp. 91–96 Read article
-
CMOS Technology Enhancing the Modulation Method of Amplitude and Frequency Variables
Abstract: The method of incorporation of complementary metal oxide semiconductor (CMOS) technology for the data modulation for analog-to-analog has been discussed in this article. A review of all types of modulation and simulation waves has been described in this article. In distinction, analog circuits allow signals to continually fluctuate within the bounds of the power supply and circuit resistances. Even though CMOS technology is available for a wide range of voltages …
Published in International Journal of Analog Integrated Circuits · Vol. 8, Issue 1, 2022 · pp. 18–24 Read article
-
Study on Hazardous Explosives
Abstract: The Mining sector uses explosives to extract ore and discover orebodies, according to the Canadian Explosives Research Laboratory. Oil and gas companies use them to construct pipelines, the forest business uses them to construct roads, and the construction industry uses them to construct infrastructure. Explosives are required by the aerospace sector to power the rockets that launch satellites into orbit. Among other things, explosives are necessary for the rocket fuel …
Published in International Journal of Energetic Materials · Vol. 7, Issue 2, 2021 · pp. 26–33 Read article
-
Role and Applications of Alloys in Everyday Life
Abstract: An alloy is a mixture of metals or a mixture of a metal and another element. Alloys are defined by a metallic bonding character. An alloy may be a solid solution of metal elements (a single phase) or a mixture of metallic phases (two or more solutions). Melting point: Put the alloy, a piece of tin and a piece of lead into a sand tray. All three samples should be …
Published in International Journal of Metallurgy and Alloys · Vol. 3, Issue 1, 2017 · pp. 17–23 Read article
-
Characterization and Wear Behavior of TiN, TiAlN, TiCrN and AlCrN PVD Coatings Deposited onto AISI H13 Hot Forging Die Steel
Abstract: Four Nitride coatings TiN, TiAlN, TiCrN and AlCrN were deposited onto AISI H13 hot work die steel by cathodic arc evaporation physical vapour deposition (PVD) technique. The coatings were characterized by SEM, SEM-EDS, XRD, line scan EDS and X-Ray mapping tests and micro hardness tester. The wear characteristics were investigated using a pin on disc method at high temperature and speed against En-31 bearing steel disc. It was observed that …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 2, 2018 · pp. 1–11 Read article
-
Nano Finishing of HDPE/Al2O3/HAp Ternary Composite Based Acetabular Socket using Polymer Rheological Abrasive Semisolid Medium
Abstract: Acetabular socket is one of the important parts of the hip joint. The surface roughness in the acetabular socket decides the friction and wear during the motion of the human. Low surface roughness in the acetabular socket gives free motion of hip joint as well as high joint life. Nano surface roughness on the inner surface of acetabular socket also reduce the particles generation during the dynamic motion between hip …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 2, 2016 · pp. 5–8 Read article