Search
1025 articles for “Potential”
-
Comparative study of the Magnetoelectric Properties in Core-Shell Nanocomposites as well as mixture of CoFe2O4:BaTiO3
Abstract: Nanostructures of multiferroic materials have been drawing increasing curiosity due to the boosted magnetoelectric coupling and potential for succeeding generation multifunctional devices. Composites of ferroelectric and magnetostrictive materials indicate more magnetoelectric coupling than single phase materials. Core-shell CoFe2O4:BaTiO3 nanocomposites (1:1 weight ratio) and a mixture of both of them have been produced by a combination of hydrothermal and sol gel techniques. X ray diffraction analysis endorses the presence of both …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 1, 2015 · pp. 1–6 Read article
-
FIRE PERFORMANCE OF POLYMER NANOCOMPOSITES
Abstract: The current communication reviews the effect of layered silicate nanoclays on the flame retardancy of non-char forming polymers, with special emphasis to polystyrene (PS) and poly(methyl methacrylate) (PMMA). The effect of nanoreinforcement in the blend of PS and PMMA has also been reviewed. This article is a bird’s eye view on the efficacy of nanoclays in acting as a potential flame retardant. An attempt has also been made to investigate …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 1, 2015 · pp. 32–44 Read article
-
Synthesis & Characterization of ZnSe/CdSe/ZnS Nano-particles embedded in Polymer matrix- A Review
Abstract: The main purpose of this review is to highlight the present state of knowledge in synthesis, characterization, optical properties, challenges, and potential applications for the most common ZnSe/CdSe/ZnS: PVA polymer nanocomposites, utilizing these nanoscale materials for the application in optical field are being used numerously. The major impact is done on the research already done and being done from nanomaterial to nanocomposites since there has been a revived interest in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 1, 2018 · pp. 28–33 Read article
-
A review on E-waste: National & International Scenario
Abstract: Electrical and electronic waste (e-waste) is one of the fastest growing municipal solid waste stream in the world. The existing management practices related to E-waste in most of countries are reasonably poor and have the potential to risk both human health and the environment. According to recent studies, only about 6 percent of the E-waste is recycled, of which 95 percent is recycled through the informal sector. E-waste recycling in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 21–31 Read article
-
Medicinal Application of Nano Composites of Al 8081 Alloy/Tib2 in Acid Chloride and Neutral Chloride Mediums at Laboratory Temperature
Abstract: Nanomaterials are at the leading edge of the rapidly growing subject of nanotechnology. Their precise size-dependent homes make these materials advanced and imperative in any areas of human activity. This brief review tries to summarise the maximum latest developments in the subject of carried out nanomaterials, specially their application in biology and medicine, and discusses their commercial is at ion prospects. This paper evaluates corrosion properties of TiB2/Al8081 alloy immediately …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 8–14 Read article
-
Study on Preparation and Properties of Agro-waste Particleboard at Various Press Temperatures
Abstract: This study concerns the influence of temperature on changes in physical and mechanical properties of particleboard fabricated from betel nut (Areca catechu L) fiber (Agro-waste) and urea-formaldehyde adhesive during hot-pressing with multiple press temperatures (120, 130, 140, 150 and 160°C) at 15 minutes. The physical and mechanical properties of particleboards were determined by British Standard (BS-1811) and Indian Standard (IS-3087) Methods. For some physical and mechanical properties, it appears that …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
DFT studies of the structural, electronic and optical properties of armchair CaONT, Oxygen incorporated CaO2NT and CaO3NT and zigzag SWCaONT for Optoelectronics Applications
Abstract: In this research, the structural, electronic and optical properties of the nanotubes of CaO, CaO2 and CaO3 were studied using the DFT quantum computational approach. Although studies of electronic and optical properties were done for 2D CaO nano sheets with oxygen incorporation, there are no available data to show similar studies on the nanotubes forms of this metal oxide. This research therefore tried to explore more about the structural, electronic …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 32–40 Read article
-
Green Hydrogen based Green Nanotechnology for Industrial Nano waste Treatment
Abstract: The research into nanowaste treatment and recycling is ongoing process. Particularly the development of new methods and technology for nanowaste treatment is a focus of most professionals, scientist and engineers. One of the developments among the emerging technology is the green nanotechnology, which is environmental friend, affordable, an alternative means of clean energy productions, and economically cost effective. This research is therefore, focused on assessment of chemical related waste and …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 41–48 Read article
-
Nanocomposites: The Fusion of Nanotechnology and Composite Materials
Abstract: Nanocomposites, resulting from the integration of nanotechnology and composite materials, have emerged as a cutting-edge class of materials with exceptional properties and multifunctional capabilities. This article presents a concise overview of the principles, fabrication methods, and diverseapplications of nanocomposites, highlighting their profound impact on numerous industries. By harnessing the power of nanotechnology, nanocomposites offer precise control over material structure and properties at the nanoscale. Through the incorporation of nanoscale reinforcements, …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 43–50 Read article
-
Advancements in Manufacturing Techniques for High-performance Fiber-reinforced Composite Materials
Abstract: This article explores the recent advancements in manufacturing techniques for high-performance fiber-reinforced composite materials. Composite materials have gained significant attention in various industries due to their exceptional mechanical properties, lightweight nature, and design flexibility. The continuous development of manufacturing methods has enabled the production of composites with improved performance, increased productivity, and reduced costs. This article reviews key manufacturing processes, such as automated fiber placement, resin transfer molding, and additive …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 35–42 Read article
-
Effect of Some Physical Properties on the Swelling Behaviour of Biomass Membranes
Abstract: The membranes of Detarium microcarpum seeds (DMS) and Alfzelia africana seeds (AAS) were developed. The water uptake capacities for DMS and AAS were found to be 500% and 390% respectively. The percentage of water uptake by Detarium microcarpum membrane and Alfzelia africana membrane, both increased with increased in the concentration of DMS and AAS as well as pH. The effect of contact time on water uptake showed that the water …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 2, 2016 · pp. 8–15 Read article
-
An Overview of Ceramic Matrix Composite
Abstract: Ceramic materials often exhibit a combination of useful physical and mechanical properties, including high refractoriness, but their applications are restricted due to their brittle behaviour; in an attempt to improve the strength, and particularly the toughness, of brittle ceramics particle-strengthening and fibre-reinforcement have been utilized, with limited success. The factors which affect the mechanical properties of these composite systems are discussed, and the various experimental systems that have been investigated …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 23–26 Read article
-
3D printing of polymers by fused deposition modeling (FDM): filament ink to composite materials
Abstract: 3D printing technology has gained significant attention for its rapid manufacturing of on-demand customized objects from digital computer-aided design (CAD) model without need molds or machining. Polymers are the most utilize a class of commercial materials in additive manufacturing (AM) because of excellent physico-mechanical properties with desired objects. Fused deposition modeling is the filament based printing process which most widely popular for commercial thermoplastics polymer than other manufacturing techniques because …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 1–14 Read article
-
Mercerization and Mechanical Properties of Natural Fibre Reinforced Composite: A Comprehensive Review
Abstract: Growing public concern about environmental issues has prompted the production of renewable, economical, and ecologically friendly materials. Thus a shift from synthetic fiber reinforced composites to natural fiber reinforced composites can be seen. Since Fibre reinforcement is deciding factors in the Structural properties of any engineered composite. But poor interfacial adhesion of fibre matrix obstruct it's potential while using in structural applications. Different studies suggested that the surface modification techniques …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 1–8 Read article
-
Kinetic Modeling and Thermodynamic Study of the Simultaneous Adsorption of Polycyclic Aromatic Hydrocarbons (PAHs) Onto Organomontmorillonite in Aqueous Medium
Abstract: Water is a vital source of human life, but it has frequently been polluted by mono and polycyclic aromatic hydrocarbons, usually from petrochemicals in petroleum industrial effluents as well as other anthropogenic activities. This study investigate the potential of montmorillonite intercalated HDTMAand TMPA cations for effective removal of five (5) different polycyclic aromatic hydrocarbons (PAH) namely: naphthalene, anthracene, chrysene,benzo(a)pyrene and benzo(g,h,i) perylene in aqueous medium. To research PAH adsorption behaviour …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 28–38 Read article
-
A Model for Plastic-Hydrolytic Damage Bioresorbable Polymer Composites
Abstract: This paper explains and assesses a recently developed constitutive model for elastic-damage that may sustain plastic-hydrolytic damage. When a metallic material is subjected to plastic strain, voids and microcracks in the metal matrix start to form, develop, and merge. This is what causes ductilitydegradation in metals. Only a few of the many models that have been presented to depict ductile failure have done a thorough analysis of the entire damage …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 23–27 Read article
-
MECHANICAL BEHAVIOR OF MICRO-LATTICE STRUCTURE OF BCC ARCHITECTURE IN SANDWICH CONSTRUCTION UNDER UNI-AXIAL COMPRESSIVE LOADING CONDITIONS
Abstract: ABSTRACT: Due to high energy absorption and fire resistant characteristics, the researchers have focused on micro-lattice structures. This research paper focused on applications of micro-lattice structures in the foreign object impact conditions and has high potential in the future of any structural applications, mainly aircraft structural applications. The micro-lattice structures are of body centered cubic (BCC) architectures and for modeling, the structures with four different unit cell edge lengths are …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 1–23 Read article
-
SEPARATION OF CO2/CH4 USING POLYMERIC MEMBRANES - REVIEW
Abstract: Separation of CO /CH mixture is widely done efficient separation of mixture into desired components unit processes and unit operation had 2 4 been developed with passage of time. Sometimes using conventional technologies. CO2 when carried along with CH4 can cause additional cost of pumping. Most commonly used technique like cryogenic separation, adsorption and absorption are used for decades for separation of CO2 form CH4.Membrane has been developing technology for …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 1, 2019 · pp. 13–29 Read article
-
Synthesis of Biodegradable Nano Composite of PMMA vinyl Polymer with Corn Cob
Abstract: Vinyl polymers are the largest category of polymers which have wide applications. PMMA is important vinyl polymer which when modified with with Corn Cob(agricultural waste) for nanocomposite formation, then it may result biodegradable modified polymer. Corn cobs (focal piece of maize) are either treated as waste or consumed as fuel causing ecological concern. So as to accomplish its worth option in new research regions, corn cob can be prepared synthetically …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 20–24 Read article
-
Comparative Experimental Measurement on the Fundamental Properties of Chemically Treated Natural Fibers
Abstract: Plant-derived natural fiber as a reinforcing component can play a prevalent role in the field of fiber reinforced polymer composite due to their obtainability, environmentally friendly, renewability, low- density, and low cost. Golden fiber (jute fiber)/coconut fiber can be a potential candidate to replace the synthetic fiber reinforced polymer composite. The influences of chemical treatments such as mercerization, sodium lauryl sulfate and a combination of mercerization and sodium lauryl sulfate …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 34–44 Read article