Search
1120 articles for “energy”
-
Kinetic and Thermodynamic Studies of Adsorption of Pb (II) by Using Ferrous Sulphide as an Adsorbent
Abstract: Poisoning of lead is causing a serious threat to the environment. In the present study the adsorption behaviour of lead was studied in detail by ferrous sulphide in granular form. Ferrous sulphide has the magnetic properties and makes it a better candidate for lead removal. Batch adsorption experiments were carried out by varying different process parameters such as contact time, adsorbent dose, pH, and temperature. Lead adsorption by ferrous sulphide …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 33–41 Read article
-
Catalytic hydrogenation of dimethyl-nitrobenzene to dimethyl-aniline over Ni catalysts
Abstract: The catalytic transfer hydrogenation of dimethyl-nitrobenzene (DN) to Dimethyl-aniline (DA) was studied in the temperature range 343–403 , pressure range of 4–10 bar H2 and ethanol as solvent using Ni on alumina-silicate as catalyst above agitation speed 800 rpm. The substrate feed concentration was varied in the range from 0.124 to 0.745 kmol/m3 while catalyst loading was in the range 4–12% (w/w) of dimethyl-nitrobenzene. Dimethyl-aniline was the only reaction product, …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 2, 2017 · pp. 19–29 Read article
-
Micromechanical Analysis of Compaction and Drilling of Granular Media- A Review
Abstract: Granular matter is ubiquitous in our daily life yet far from completely understood. These granular materials have constituted a class of complex systems which exhibit global behaviors been reminiscent of solids, liquids, gases, or otherwise uniquely their own. The key to achieve good properties lies in the material structure from the molecules, via structures on nano- and micro levels to the macroscopic material. This paper also reviewed selected approaches and …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 2, 2017 · pp. 1–6 Read article
-
An Eco-friendly approach for the utilization of waste water for the generation of Bioelectricity
Abstract: Abstract: Microbial fuel cell (MFC) is pollution free, electricity generation device; it represents a new method for eco-friendly source of electricity generation. When we produce electricity by Microbial fuel cell from food factory waste water we obtained pure water as a byproduct. Microbial fuel cell (MFC) is a special type of cell by which we can produce eco-friendly energy in the form of electricity. This paper explores the application of …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 2, 2018 · pp. 23–26 Read article
-
Variations in GCRs with Solar Variability between 1996-2018
Abstract: Abstract The solar outputs and their variability controls by heliospheric structure, produce changes in cosmic ray intensity (high energy charged particles) entre into inner heliosphere. Observation based on the data taken from Omniweb data centre for solar- interplanetary data and monthly mean count rate of cosmic ray intensity (CRI) variation data from Oulu and Moscow neutron monitors during 1996-2018. It is observed that slow decline of solar cycle 23 and …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 2, 2018 · pp. 43–46 Read article
-
Nuclear Cogeneration Projects in India : An Assessment of the Current Scenario and Future Prospects
Abstract: Desalination of sea water through thermal and membrane based techniques and production of hydrogen through low temperature water electrolysis at facilities co-located with nuclear power plants are two areas identified for deploying co-generation projects in India in the near term. Nuclear desalination meets the requirements of clean drinking water in and around the nuclear facility, as well as to the in-house demand for high purity water for steam generation and …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 2, 2019 · pp. 69–89 Read article
-
Development of a Conceptual Framework for Licensing of Nuclear Cogeneration Plants: Insights based on the Indian Experience and Global Best Practices
Abstract: Nuclear cogeneration projects represent industrial scale non-electric applications of nuclear power, providing value added products and services such as freshwater, high grade heat, hydrogen and other power fuels, district heating, etc. These projects are typically coupled (either thermally and/or electrically) to the secondary cycle of the power plant and can cater to multiple on and off site users. With growing interest in nuclear power and increasing recognition of the role …
Published in International Journal of Chemical Engineering and Processing · Vol. 7, Issue 1, 2021 · pp. 1–11 Read article
-
Effect of Particle Size Distribution (PSD) on the Rheology of Coal Water Slurry (CWS)
Abstract: A new type of complex fluid, which was prepared using Sodium Lignosulfonate as a polymeric additive, has been investigated for its properties as a multifunctional coal water slurry system with respect to particle size distribution and rheological properties. Coal water slurry is a double-phase system consists of fine coal particles suspended in water. The properties mainly depend on the physical and chemical characteristics of coal, additives and flocculation tendency. This …
Published in International Journal of Chemical Engineering and Processing · Vol. 7, Issue 1, 2021 · pp. 45–57 Read article
-
Simulation of Biomethane Steam Reforming Plant for Hydrogen Production using Aspen Hysys
Abstract: Aspen Hysys simulation of a process plant for hydrogen production from biomethane through steam reforming process was considered in this work. Models for reactor designs were developed using the principles of conservation of mass and energy. The kinetic model for the biomethane steam reforming process was developed from first principle using the Eley-Rideal mechanistic approach. Computer software (Aspen Hysys) was adopted for the design and for the simulation of the …
Published in International Journal of Chemical Engineering and Processing · Vol. 7, Issue 2, 2021 · pp. 10–20 Read article
-
Design of Batch Reactors for Pulping of Plantain Pseudostem
Abstract: Plantain pseudostem has little application in Africa and constitute major domestic waste and often problematic to manage. It however contains a high content of lignocellulose that can be used for production of pulp. With the geometric decline of feedstock for pulp production due to dwindling wood resources, plantain pseudostem becomes a ready alternative. This study developed design models for batch reactor for the plantain pulping process under isothermal, non-isothermal and …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 1–8 Read article
-
The Power of Chemical Modeling: Unveiling Molecular Behavior
Abstract: Chemical modeling has developed as a strong tool for deciphering the complicated behavior of atoms at both the molecular and atomic scales. Researchers can simulate and comprehend the complex dynamics and properties of chemical systems by combining ideas from physics, chemistry, and computer science. The importance of chemical modeling in studying molecular behavior and demonstrates its transformative ability in a variety of scientific disciplines. Chemical modeling, using advanced computational approaches, …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 9–13 Read article
-
Design and Performance Evaluation of an Existing Cooling Tower in Port Harcourt Refinery
Abstract: The need for efficient and effective waste heat removal systems forms the basis of this research which is the Design and Performance Evaluation of an Existing Cooling Tower in Port Harcourt Refinery. The design performance equation models were developed by the application of the principle of conservation of mass and energy and also from standard correlations from literatures. The input parameters for the solution of the design performance equations were …
Published in International Journal of Environmental Chemistry · Vol. 6, Issue 1, 2020 · pp. 30–41 Read article
-
Environmental Impacts of Water Pollution
Abstract: Water is required for all life forms to exist. Water is essential for agriculture, industry, fishing, and tourism, among other things, in addition to household uses. Water availability has decreased as the world's population, urbanization, and industrialization have increased. The quality of the water used is also deteriorating as it becomes increasingly polluted. You've probably heard about some of the health harm or adverse consequences of water contamination. This teachable …
Published in International Journal of Environmental Chemistry · Vol. 7, Issue 2, 2021 · pp. 46–49 Read article
-
Analysis of the Dangerous Impacts of Food Preservatives
Abstract: Every living thing requires nourishment to survive. Nutrients found in food include vitamins, minerals, fats, proteins, and carbohydrates. In order to produce energy, promote development, and sustain life, an organism must consume and digest the nutrients included in food. Some preservatives are used to extend the shelf life and maintain the quality of food, but they may have negative side effects; therefore, whenever possible, preservative-free foods should be used. In …
Published in International Journal of Environmental Chemistry · Vol. 8, Issue 2, 2022 · pp. 43–49 Read article
-
Nano-technology based Chemical Sensor in Food Industries
Abstract: A major part of present science and technological development links with nano- technologies as it contributes to each branch of science by its versatile characteristics which make it familiar in both living & non-living world. Food is one of the essential necessities for all the living elements as a source of energy. Without food, no one can survive in this world, hence regular intake of foods with proper nutrition is …
Published in International Journal of Environmental Chemistry · Vol. 9, Issue 1, 2023 · pp. 34–40 Read article
-
Artificial Intelligence in Climate Change Mitigation and Adaptation
Abstract: Addressing the pressing global issue of climate change demands rapid and creative approaches. Artificial Intelligence (AI) has surfaced as a potent instrument for addressing the complex issues linked to climate change. It provides inventive answers for diminishing greenhouse gas emissions and getting ready for the impacts of a shifting climate. This article conducts a comprehensive examination of AI's pivotal role in addressing climate change. It explores various aspects, including AI-driven …
Published in International Journal of Environmental Chemistry · Vol. 9, Issue 2, 2023 · pp. 1–7 Read article
-
Mechanical Studies and Thermal Kinetics of Isoniazid Crystals
Abstract: Single crystals of isoniazid were crystallized by slow solvent evaporation method. The crystal structure was confirmed using single crystal X-ray diffraction analysis. Micro hardness was estimated and work hardening coefficient and Newtonian resistance pressure of the crystal were determined. Kinetic analysis of the thermogravimetric data was carried out by using Coats-Redfern relation. Activation energy, frequency factor and order of reaction were also calculated. Arrhenius equation for isoniazid is k=0.43×105e–79103/RT mol–1s–1. …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 1, Issue 1, 2015 Read article
-
Development of Geo-Polymer based Light Weight Bricks
Abstract: Light weight geopolymer bricks were developed during this study. The mix was made with lime sodium silicate and fly ash as ingredients. A maximum shrinkage was observed at CaO lime ratio of 1.0. Bulk densities were also lower at the ratio of 1.0. The maximum cold crushing strength (CCS) value was found at the ratio of 0.745. Increase in mix water decreased the strength. Water content of 24% is recommended …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 1, Issue 1, 2015 Read article
-
The Thermodynamic Studies of Derivative of Thiabendazole in 1, 4 Dioxane System in the Temperature Range 303 to 323 K
Abstract: Densities, viscosities of some derivatives of thiabendazole in 1, 4 dioxane were measured in the temperature range 303 to 323 K. The viscosity was determined by John-Dole equation. The data has been used to calculate thermodynamic parameters. G and H are negative and S is positive which indicate the spontaneity of reaction according to thermodynamics. Keyword: thermodynamic parameters, free energy change, enthalpy change, entropy change
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 1, Issue 1, 2015 Read article
-
Effect of TiO2 on HER Activity of Electrodeposited Zn–Ni Coatings
Abstract: This paper demonstrates the improved electrocatalytic behavior of Zn–Ni alloy coatings for alkaline hydrogen evolution reaction (HER), due to addition of TiO2 nanoparticles into the bath. Zn–Ni alloy coatings have been electrodeposited galvanostatically on copper, with wide compositional range (2.31–7.91 wt. % of Zn) at different current densities (c.d.) between 2.0 and 5.0 A dm-2. The electrocatalytic behaviors of all coatings have been studied for alkaline HER in 1.0 M …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 1, 2017 Read article