Search
986 articles for “FACT”
-
Comparative Study of the Nature of Slag in the Formulation of Concrete Pavers
Abstract: The steel mill generates about 8000 tons/year of slag by transforming scrap metal to produce more than 60000 tons/year of wire rod and steel reinforcing bars. These co-products are stored or used for backfill. With this almost inexhaustible slag deposit, Morocco has a valuable resource thanks to its high content of silicates, lime and metal oxides. This has led to the attempt to valorize it in the manufacture of paving …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 12–27 Read article
-
An Extensive Overview of Al-Mg-Si Alloy’s Electrochemical Behavior
Abstract: This review emphasizes on the effects of microstructure and alloying components on the electrochemical behavior of Al-Mg-Si alloys used as sacrificial anodes. The presence of alloying elements hinders surface film formation on aluminum, while microstructural factors such as grain size distribution and precipitate volume fraction influence alloy properties. The Al-Mg-Si phase diagram and the presence of the Mg2Si phase are also discussed, highlighting the effects of Mg and Si solubility. …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 2, 2023 · pp. 1–11 Read article
-
In-Vitro Evaluation of Control Release of Drug with Carbon Based Nanomaterials
Abstract: Nanomaterials have been introduced as a novel & interesting materials due to their advance properties & their use in nanotechnology applications like nano-sensors, nano-chips, control & targeted drug delivery, diagnosis, gene therapy. These all possibilities are due to their physico-chemical & multifunctional biological characteristics. In medicine, control release of drug is a factor to reduce dosage form in revert reduce side effects. In this work, nanomaterials are using as a …
Published in International journal of Nanobiotechnology · Vol. 1, Issue 1-2, 2015 · pp. 14–18 Read article
-
Nanoscience and Nanotechnology: A Review
Abstract: The field of nanotechnology has been recently blooming as the most economically and commercially feasible technology in the arena of science, medicine, research etc. The advent of nanomaterials like fullerenes, nanoparticles, nano powders, nanotubes, nanowires, nanorods, nano-fibers, quantum dots, nano sensors, nano robots and nano bubbles has wider range of applications in the field of medicine, research, cosmetic products, healthcare, electronics, photonics, biotechnology, engineering products, pharmaceuticals, drug delivery, and agriculture. …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 1, 2019 · pp. 19–31 Read article
-
The Nano Revolution: Unleashing the Power of Nanobiotechnology
Abstract: Nanobiotechnology, the convergence of nanotechnology and biology, has emerged as a field of immense promise and innovation. Manipulating matter at the nanoscale opens up new possibilities in various sectors, including medicine, diagnostics, regenerative medicine, and environmental sustainability. This abstract provides an overview of nanobiotechnology, exploring its fundamentals, applications, challenges, and ethical considerations. The article begins by defining nanobiotechnology and highlighting its interdisciplinary nature. It explains the unique properties of nanoscale …
Published in International journal of Nanobiotechnology · Vol. 9, Issue 1, 2023 · pp. 22–29 Read article
-
Application of nanomaterials for food industry
Abstract: This review focuses on the use of nanomaterials in food industry. The topic of this review highlights application of nanomaterials in processing, in packaging and as food contact materials. This review also gives an insight on the food safety as well as regulation of nanotechnologies for ensuring food safety. The food industry is in need of technologies, which can be employed to produce fresh authentic, convenient and flavourful food products. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 2, 2016 · pp. 6–24 Read article
-
Recent advances in utilization of wide band gap metal oxides for photocatalysis of organic waste
Abstract: Water cleaning has become a major challenge in the current scenario with huge amounts of industrial wastes being accumulated in the water bodies over the years. Traditional chemical, physical and biological processes for treating wastewater containing textile dye have disadvantages such as high cost, high energy requirement and generates secondary pollution during treatment process. The progressive oxidation processes technology has been appealing growing attention for the decomposition of organic dyes. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 1–9 Read article
-
Magnetic Field Guided Diluted Magnetic Semiconductor, ZnxFe2-xO3 Nanoparticles for Biomedical and Biosensing Application
Abstract: The magnetic field guided nanoparticles are studied in the viewpoint of diluted magnetic semiconductor. Different structures and properties associated with Zn doped αFe2O3 nanostructures are presented in theoretical formulations. In addition, scientific methods of synthesizing particularly Solvothermal and biological methods of synthesizing Zn0.6Fe1.6O3 nanoparticles are discussed. More emphasis is given to the essence of nanotechnology from non-organic to organic matter namely nanoparticles of Zn0.6Fe1.6O3 to DNA. For in vivo or …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 1, 2022 · pp. 1–18 Read article
-
Comparative study of the Magnetoelectric Properties in Core-Shell Nanocomposites as well as mixture of CoFe2O4:BaTiO3
Abstract: Nanostructures of multiferroic materials have been drawing increasing curiosity due to the boosted magnetoelectric coupling and potential for succeeding generation multifunctional devices. Composites of ferroelectric and magnetostrictive materials indicate more magnetoelectric coupling than single phase materials. Core-shell CoFe2O4:BaTiO3 nanocomposites (1:1 weight ratio) and a mixture of both of them have been produced by a combination of hydrothermal and sol gel techniques. X ray diffraction analysis endorses the presence of both …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 1, 2015 · pp. 1–6 Read article
-
Graph Theory and Matrix Method for Development and Design of Combustion Engine
Abstract: The idea upon which any methodology development is pillared leads to real time decisions if simulation and assessment is as per the standard codes set by standard organizations. More near is the system with standard system more it is appropriate for operation. In the present work system under consideration is internal combustion engine. Fuel cost is one of the most important parameter in life cycle analysis of the internal combustion …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 16–25 Read article
-
Computation of Gas Turbine System as Renewable Energy Conversion Mechanisms
Abstract: In the present work thermo-economic analysis of a cogeneration cycle is carried out so that any power generation industry can choose best power generation system out of the choices available with organisation. Mathematical modeling for the cost evaluation of each component is developed and results are obtained with computational programming tool EES (Engineering Equation Solver). Form results it is being found that with change in combustion chamber outlet temperature or …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 10–15 Read article
-
Application and Future of Composite Materials: A Review
Abstract: Materials play a significant role in the blooming of human civilization and country’s infrastructure. Composite materials have boundless engineering application where strength to weight ratio, low cost and ease of fabrication are required. For certain applications, the use of composite materials as compare to metals has in fact resulted in savings of both weight and cost. Some examples are cascades for engines, leaf spring, curved fairing and fillets, replacements for …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 1–4 Read article
-
Study on Preparation and Properties of Agro-waste Particleboard at Various Press Temperatures
Abstract: This study concerns the influence of temperature on changes in physical and mechanical properties of particleboard fabricated from betel nut (Areca catechu L) fiber (Agro-waste) and urea-formaldehyde adhesive during hot-pressing with multiple press temperatures (120, 130, 140, 150 and 160°C) at 15 minutes. The physical and mechanical properties of particleboards were determined by British Standard (BS-1811) and Indian Standard (IS-3087) Methods. For some physical and mechanical properties, it appears that …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
Physico-mechanical, and Biodegradation Properties of Polyethylene/Food Polysaccharide Blends
Abstract: Hydrophilic/polar and hydrophobic/non-polar materials do not blend well, which causes issues in the production of biodegradable plastic. Plasticizer (glycerol) was one of the components added to the mixture to increase compatibility between the two materials; this also made the film less brittle. The purpose of this study is to look at how different food polysaccharide contents affect the physico-mechanical, and biodegradation characteristics of novel polymeric-based bio-composite films made from low-density …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 1–13 Read article
-
Magnetically Tunable, Excitonic, Fermion, and Spin States in Multiferroics TbMnO3 Quantum Structures
Abstract: The research into multiferroic is gaining attentions of many researchers. Due to the fact that multiferroic quantum structures presents interesting property that meets the need of many devices such as sensors, super capacitors, Nanogenerators, and medical tools they are preferred. The origin of multiferroicity is the combinations of fermionic, spin, and excitonic states due charge localizations and transport. The time varying electric fields are better-controlled by magnetic fields. On the …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 24–34 Read article
-
An Efficient and Simple Higher Order of Shear Deformation Theory for Static and Free Vibration of Laminated Composite Plates
Abstract: In the present study, the static and free vibration of laminated composite plates is examined by using a refined shear deformation theory and developed for a bending analysis of orthotropic laminated composite plates. These models take into account the parabolic distribution of transverse shear stresses and satisfy the condition of zero shear stresses on the top and bottom surfaces of the plates. The most interesting feature of this theory is …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 23–42 Read article
-
Effect of Fly Ash Cenosphere on Electric Properties of Polypropylene
Abstract: Present work deals with findings on electrical properties of cenosphere filled polypropylene composites. Frequency dependence of the dielectric constant (ε’) of the composite samples was carried out at ambient temperature. A theoretical model is proposed for the electrical conductivity of porous polypropylene/cenosphere composites. Role of addition of these cenosphere particles on electrical properties such as dielectric constant, tanδ, dc conductivity and ac conductivity were investigated. Increase of fly ash cenosphere …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 7–19 Read article
-
Experimental evaluation of dc Conductivity of Rice Husk Reinforced Polypropylene Composites with addition of cenosphere
Abstract: Insulating materials are used in electrical power circuits to prevent leakages of current. Main objective of this study is to evaluate the dc conductivity of rice husk filled polypropylene composites with and without cenosphere. The conductivity at room temperature was found to decreases from 2.64e-13 to 9.371e-14 S cm-1 with the addition of cenosphere. Dense packing of the material, collapse of pores and decreases in air gap between the rice …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 20–27 Read article
-
An Overview of Ceramic Matrix Composite
Abstract: Ceramic materials often exhibit a combination of useful physical and mechanical properties, including high refractoriness, but their applications are restricted due to their brittle behaviour; in an attempt to improve the strength, and particularly the toughness, of brittle ceramics particle-strengthening and fibre-reinforcement have been utilized, with limited success. The factors which affect the mechanical properties of these composite systems are discussed, and the various experimental systems that have been investigated …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 23–26 Read article
-
Hydraulic Flushing Flux Enhancement Techniques in Membrane Separation Processes: A mini Review
Abstract: Looking into current scenario of the wastewater generated from the allied industries which leads researcher and industry persons to reclaim the water to certain extent. Conventional methods removes the pollutants and toxics to maximum level but quality of water is the must requirement for the industries to work efficiently. Membrane separation processes play vital role in rectifying the conventional method by replacing them to some extent or by hybrid mixture. …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 1–3 Read article