Search
83 articles for “microstructure”
-
Modification of Solar Hot Water Heating System
Abstract: In optoelectronics system, the copper sulfide powder plays an important role as a thin film layer. This paper covers fabrication of Copper sulfide (CuS) Powder and its characterization. The fabricated Copper sulfide powder gives better result as compared to commonly used Copper sulfide (CuS) available in the market. In this experiment, the Copper sulfide powder (CuS) was coated on the tubes as a thin film and measured the outlet water …
Published in International Journal of Water Resources Engineering · Vol. 9, Issue 1, 2023 · pp. 33–39 Read article
-
Impact of Annealing on Structural and Surface Properties of Nanostructured ZnO Thin Films
Abstract: ZnO thin movies with various grain size were developed on undefined quartz substrate utilizing turn covering technique. We have announced the impact of toughening temperatures on the basic and surface properties of ZnO thin movies. The surface properties were described by AFM. From XRD investigation, it can be seen that the FWHM diminishes with an expansion in strengthening temperature from 500 to 575ºC which is reflected in the expansion in …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 1, 2017 · pp. 33–37 Read article
-
A Review on - Hybrid Nanomaterials for Future Applications in Construction
Abstract: Hybrid nanomaterials contain at any rate two special sections, regularly inorganic portions (metal particles, metal bundles or particles, salts, oxides, sulfides, non-metallic segments and their subordinates, etc.) and normal fragments (regular social occasions or molecules, ligands, biomolecules, drug substances, polymers, etc.) that are joined by unequivocal participations which achieve the synergistic improvement of their useful properties. A hierarchy of associations may be related with the advancement of mutt materials, from …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 1, 2021 · pp. 28–35 Read article
-
Analysis of Mechanical and Corrosion Properties of AISI50110 (EN31) Steel With and Without Heat Treatment
Abstract: The mechanical properties of steel decide its applicability for a particular condition. Heat treatment processes are commonly used to enhance the required properties of steel. The material was machined to ASTM standards and then different tests like microstructure analysis, hardness test, impact test, etc. were carried out after the heat treatment processes. All the tests were carried out in the mechanical workshops and laboratories under the supervision of their respective …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 24–41 Read article
-
Mechanical properties of Al-Si17Cu3.5Mg0.8 alloy fabricated by stir casting with UV and new CRSS casting process with and without T6 condition
Abstract: Aluminum-Silicon metal matrix composites are the popular materials in the vast majority of the car and modern industries on account of their low weight, high mechanical properties, and incredible wear opposition properties. In the present study, Al-Si17Cu3.5Mg0.8 alloy is fabricated by two casting processes such as stir casting with ultrasonic vibrations (RSC) and merged-rheo-stir-squeeze (CRSS) casting with and without heat treated (T6) condition. Microstructural and material characterization was explored by …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 15–24 Read article
-
Ability of Metallic Materials to Resist Surface Damage Induced by High-temperature Action of Air or other Gaseous Mediums
Abstract: The features of the oxide layer scale that forms on the metal's surface and limits gas penetration into the metal, limiting the growth of gaseous corrosion, influence a metal's or alloy's oxidation resistance in an oxidising atmosphere. The rise in weight of sample being tested (due to oxygen uptake by the metal) or even the weight loss after removing the scale from the sample's surface, related to a unit surface …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 16–21 Read article
-
Thermal Processes and Metallurgical Transformations: How Temperature Influences Metal Structures?
Abstract: The guide also addresses the selection criteria for different heat treatment processes based on the type of metal and the desired application, providing insights into the balance between performance requirements and economic considerations. Furthermore, it covers advancements in heat treatment technologies, such as induction heating and laser hardening, and their applications in modern manufacturing. By integrating theoretical concepts with practical examples, this guide serves as an essential resource for metallurgists, …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 1, 2023 · pp. 57–62 Read article
-
Corrosion Resistance in Modern Metallurgical Alloys: Mechanisms & Mitigation Strategies
Abstract: Corrosion resistance in metallurgical alloys is a critical factor in their application across various industries, including aerospace, automotive, marine, and construction. This paper delves into the fundamental mechanisms of corrosion, such as galvanic, pitting, crevice, intergranular, and stress corrosion cracking, which significantly affect the longevity and reliability of alloys. It explores the intrinsic and extrinsic factors influencing corrosion behavior, including alloy composition, microstructure, environmental conditions, and mechanical stresses. Advancements in …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 2, 2023 · pp. 30–34 Read article
-
Growth of CNT in a Stainless Steel Surface by Using Gold Nanoparticle as a Catalyst for Corrosion Less Implants
Abstract: Now a day’s maximum implant are failure due to corrosion or infection. And the infection is happened due to growth of Escheria coli, steptococus, miccrobacterium tuberculosis like bacteria. Carbon nanotubes based stainless steel implant may be the promising outcome for corrosion. Carbon nano tubes when irradiate with NIR will heat up to 70oC and it has been demonstrate that folic acid adsorbed on carbon nano tubes allow specific binding to …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 2, 2016 · pp. 1–5 Read article
-
An Investigation of Physico-mechanical Characterizations of Recycled Cellulose Fiber and Glass Fiber-polypropylene Hybrid Composite
Abstract: In the field of marine engineering design, polymeric composites reinforced with natural fibers are extensively used. The results of this study demonstrate that these properties can be enhanced by adding glass fiber (GF) to recycled cellulose fiber (rCF) plastic composites. The performance of rCF and rCF/GF hybrid polypropylene (PP) composites is being studied in the current experimental effort. On the tensile behavior and impact strength of composites containing 30 wt% …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 1–10 Read article
-
Mechanical Behavior of Glass Fiber Reinforced Polyester Composites Modified with Silane Treated Alumina Nanofibers Subjected to Low-Velocity Impact
Abstract: The rise in demand and interest in lightweight offshore structures for marine, defense, automotive, and aerospace applications require nanoparticle enhancement of fiber-reinforced composite materials. When exposed to low-velocity Impact during service, these materials experience drastic changes and degradation in their macro-and microstructures. Therefore, it is critical to have a detailed comprehension of these materials' mechanical behavior and failure mechanisms. Within the scope of the current study, low-velocity impact behavior of …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 55–73 Read article
-
Assessment of Tensile and Hardness Property of AA5083/Nano-Al2O3 Metal Matrix Composites
Abstract: Al–Mg base composites reinforced with different mixtures of nano-Al2O3 particles have been fabricated by mechanical stir casting and their metallurgical and mechanical characterization has been investigated. In this investigation, the Al2O3 particulates were reinforced into the base matrix of aluminium fabricated with five levels of volume fraction such as Al/0 vol.% Al2O3, Al/2 vol.% Al2O3, Al/4 vol.% Al2O3, Al/6 vol.% Al2O3 and Al/8 vol.% Al2O3. After the Al-base-nano-composites were fabricated …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 28–34 Read article
-
Three body Abrasive wear behavior of A356 Aluminum alloy in different Solution treated condition
Abstract: In the present study, solution treatment of A356 Al alloy was carried out in three different ways namely T4-Solution Treatment – TB Condition, T5-Precipitation (Ageing) – TE Condition and T6-Solution Treatment and Precipitation Hardening – TF Conditions. Three body abrasive tests were carried out for all the solution treated samples as well as base metal. The influence of the heat treatment on the microstructure, hardness and abrasive wear resistance behaviour …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 27–32 Read article
-
Developments of Photonic Ferroelectric Ceramic Compose
Abstract: This article is a study of imposed interposed crystal allotropic modification underexposure of electricity. Ferroelectric photonic ceramic powder and films are usual studied in preparation from adoptive transduction in the same crystal based on electrical gradient. Ferroelectric ceramics and thin films used to be processed by the sol-gel method, where empirical variables of interest have been their chemical composition, constituent phases, and microstructure. Functional attributes made metal oxide compose like …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 37–44 Read article
-
Characterization of the Impact Strength in Cryogenic Treatment of TIG Welded Nickel-based Superalloy
Abstract: The TIG welding of the IN617 heat and oxidation resistant has been precisely controlled through welding parameters, while γ'-Ni3(Al, Ti) phases predominantly controlled solution strengthening, and precipitation strengthening and carbides in γ matrix, as well as γ' precipitate’s shearing mechanism is prominent to enhance strength of superalloys. The high hardness has been preserved owing to strengthening major elements such as Cr, Co, and Mo etc., and the well coherency maintain …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 1–12 Read article
-
Thermal, Mechanical, Morphological and Rheological Behavior of HDPE and Algae Based Polysaccharide Blend
Abstract: The use of renewable resource based materials as filler for thermoplastic polymers showed wide scope in agriculture, textile and commodity applications due to low cost and high mechanical properties. In this work marine red algae based polysaccharide was used as a filler material for high density polyethylene (HDPE). The polysaccharide extracted from marine based red algae is a byproduct of algae to oil extraction process. The blends were prepared using …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 35–44 Read article
-
To Analyze and Study CNC Lathe in Turning Machining Parameters
Abstract: Metal matrix composites (MMCs) consists an important class of design which have weight-efficient structural materials that are inspiring every field of engineering applications. There has been an increasing interest in composites containing low density and low-cost reinforcements. Among various discontinuously dispersed solids used, alumina is one of the most inexpensive and low-density reinforcement available in large quantities as solid waste by-product during combustion of coal in thermal power plants. Hence, …
Published in International Journal of Mechanics and Design · Vol. 3, Issue 2, 2017 · pp. 24–29 Read article
-
The Important Aspects of Functionally Graded Material
Abstract: Functionally graded material is generally, compositional and microstructure. It is a material which is useful in degree forms and consolidation or sintering processes. The present paper demonstrates a survey of the functionally graded materials and processing technique of practically evaluated material, for example, power metallurgy is discussed about alongside advantages and disadvantages. Key words: Functionally graded material (FGM), fabrication, powder metallurgy (PM).
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 1, 2016 · pp. 55–56 Read article
-
Review of Optimization Process Parameters in Welding system
Abstract: This study was based on design of experiment (DOE) using Taguchi method with four welding parameters namely welding current, welding speed, root gap and electrode angle considered for experimentation. An orthogonal array of L9 experimental design was adopted and ultimate tensile strength was investigated for each experimental run. The tensile test was carried out on extracted welded and unwelded specimens using universal testing machine (UTM). Microstructures of the welded specimens …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 1, 2016 · pp. 48–54 Read article
-
Effect of Cutting Parameters in Hard Turning on Chip Formation and Machined Surface
Abstract: Cost effectiveness, increasing demand, high production rates and reliability of the product have increased the potential of industrial application of hard turning technology during the past few years. Grinding operation for hard steel component reduces the machining sequence, the machining time and the specific cutting energy. Hard turning also shows effects like generation of high temperature, the formation of saw toothed chips. In this thesis, experimental investigation is conducted in …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 1, 2016 · pp. 28–47 Read article