Search
956 articles for “additives”
-
Effects of Compatibilizer and Paper Sludge Content on the Performances of Thermoplastic Polymer Composites
Abstract: One of the environmental issues affecting third-world countries is the economic use of lignocellulose waste, which is now being researched. Paper sludge (PS) composites will allow for the effective use of a waste material that is currently burned or buried, as well as the ability to lower the cost of the composite that is created. In this study, the mechanical and thermalcharacteristics of environmentally friendly composites constructed from PS-reinforced recycled …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 10–21 Read article
-
Improving Workability and Strength of Concrete using Plantain Liquid as Mineral Admixture
Abstract: The performance of concrete is one that is of great concern both to structural and highway engineers; therefore, there has been a momentum to continuously improve its performance in order to serve the interest of stability and economy. The present research sought was concerned with modification of the property of concrete in the fresh and hardened state. The procedure involved addition in varying amounts 5–25% of plantain liquid as a …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 2, 2017 · pp. 22–28 Read article
-
Re-characterizing of Asphalt Concrete Mix Design Properties Blended with Waste Engine Oil Fractions for Heavy Traffic. (Case Study; Stability and Density)
Abstract: Waste and rising cost of importing admixtures during construction have influenced research into better ways of recycling local waste and reduce cost of importation of admixtures. Waste Engine Oil are checked as non-bituminous and can be incorporated into asphalt concrete mix design. Different researches have shown that some waste/by-products can be included as additive in hot-blend black-top cement to acquire specific beneficial properties. It is on this basis that this …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 8, Issue 1, 2022 · pp. 14–17 Read article
-
Evaluating the Rate of Response on Asphalt Concrete Mix Permeability Influenced by Non-Bituminous Modifier on Light Traffic
Abstract: Characterization of material property is fundamental in the Mechanistic-Empirical design of flexible pavement. One such key material property is the stiffness of the pavement these influences tensile strain levels and is imperative for either the determination or pavement cracking synonymous with pavement life. It is on this basis, that the present study explored techniques that will improve the performance of flexible road pavement by modifying its stiffness; dynamic modulus, E* …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 1, 2018 · pp. 33–39 Read article
-
Effects of Industrial Waste Filler Content and Compatibilizer on the Performance of Thermoplastic Polymer Composites
Abstract: In this study, we examine the physico-mechanical characteristics of waste filler-thermoplastic polymer composites in relation to the industrial waste filler mixing ratio and compatibilizer concentrations. Three degrees of coupling agent (Epolene E-43) content and four levels of waste filler to thermoplastic polymer mixing ratios were used in the experiment to examine the physical and mechanical characteristics of the composite. As was to be predicted, composite density grew as waste filler …
Published in International Journal of Applied Nanotechnology · Vol. 9, Issue 2, 2023 · pp. 12–21 Read article
-
Review on Graphene Oxide Composites
Abstract: Addition of inert nanomaterials to cement composites is gaining interest. Graphene Oxide is one such inert additive which can impart modifications in cement hydration, improve strength and durability of cement based materials. Research on graphene oxide (GO) is intensified in the recent years for its versatile applications emanating from its very small particle size. This comprehensive review will provide the fundamentals of GO and understand the effects of GO addition …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 1, 2016 · pp. 24–30 Read article
-
Effect of Compatibilizers on Polypropylene-Based Peanut Shell Flour Composites Reinforced with Nanoclay
Abstract: The improvement of innovative ingredients is on the rise, especially in the automobile, aerospace, aviation, and construction industries. Conventional ingredients are being substituted with nanocomposite ingredients due to their excellent features. In this study, various composites based on polypropylene (PP), peanut shell flour (50 wt% PSF), and nanoclay (Cloisite 30B) were manufactured by melt mixing process followed by injection molded in the presence of maleated PP (PPM) and maleated styrene …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 2, 2022 · pp. 1–13 Read article
-
Effect of Coupling Agent on Organoclay Dispersion in Polyethylene/Organoclay Nanocomposites for Packaging Industry
Abstract: Low-density polyethylene (LDPE) is one of the most widely used polymers in various fields, but due to the hydrophobic nature of LDPE, it is hard to prepare an LDPE/clay nanocomposite. In this article, an LDPE/organoclay nanocomposite, which can be used in the packaging industry, was prepared by melt-blending organoclay with a polymer matrix (LDPE) and compatibilizer, low molecular weight oxidized polyethylene. The influences of organoclay, and compatibilizer during melt mixing …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 1–11 Read article
-
Synthesis of Bromobutyl Rubber: Effect of Reaction Temperature and Time on Bromobutyl Rubber Microstructure
Abstract: Butyl rubber is prepared by cationic polymerization process either by solution or slurry phase by randomly copolymerizing isobutylene with small amount of isoprene (1-3 mol %). It has good air impermeability and oxidative stability and thus finds extensive use in inner tube applications. The presence of unsaturation in the form of isoprene units in butyl rubber provides a means of enhancing useful properties of this important commodity elastomer by incorporation …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 30–39 Read article
-
Enhancement in Fuel Efficiency with Magnetised Nano Ferro Particles in Internal Combustion Engines
Abstract: The purpose of the research is to reduce the fuel consumption and increase the material life of an IC engine. The performance of an internal combustion engine can be evaluated in terms of fuel consumption by addition of nano sized ferro particles into cooling water system at varying percentage and magnetizing it with varying magnetic intensity. The experiment was undertaken in a 796 cc, 3 Cylinder petrol engine with a …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 9, Issue 1, 2023 · pp. 40–46 Read article
-
A Review on LIFI- Data Transmitting System
Abstract: Using visible light as a channel for high-speed data transfer, Li-Fi (Light Fidelity) is a quickly developing wireless communication technology that offers a highly effective and cutting-edge substitute for traditional radio frequency (RF)-based systems like Wi-Fi and Bluetooth. With the exponential growth of connected devices and the increasing demand for faster and more reliable communication, the RF spectrum is becoming congested, leading to reduced performance and interference issues. In order …
Published in International Journal of Digital Communication and Analog Signals · Vol. 12, Issue 2, 2026 Read article
-
Integrating 3D Printing Technology in Sustainable Interior Design forEnhanced Human Comfort and Environmental Stewardship
Abstract: As people spend nearly 70% of their time indoors, the quality of interior environments has a significant impact on human comfort, health, and overall well-being. Many indoor spaces are negatively affected by pollutants and toxins originating from construction materials, furnishings, surface finishes, and inadequate ventilation, often contributing to issues such as Sick Building Syndrome (SBS). Enhancing indoor environmental quality (IEQ) has therefore become a critical concern within sustainable design. This …
Published in International Journal of Sustainable Building Technology · Vol. 9, Issue 2, 2026 · pp. 13–18 Read article
-
Design and Finite Element Analysis of Go-Kart Tubular Chassis Using Ansys
Abstract: The design of a go-kart chassis involves the vehicle’s performance, safety, and handling characteristics. The present work focuses on the conceptual design, modeling, and structural analysis of a go-kart chassis aimed at achieving an optimal balance between strength, weight, and driver comfort using FEA software ANSYS. A detailed chassis model was developed based on ergonomic considerations and racing standards. The design was evaluated through an FEM approach to assess stress …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 56–64 Read article
-
Modern Technology Analog Circuits:Applications and Challenges - An Exploration
Abstract: An analog circuit is an electronic system that processes signals that vary continuously. The signals reflect physical quantities, such as sound, temperature or light, as proportionate levels of voltage or current. However, they are not digital circuits. They operate on a continuous spectrum. They use resistors, capacitors, and transistors, and can amplify, filter, or otherwise alter signals. Analog circuits are still a vital feature of electronic systems today, allowing continuous-time …
Published in International Journal of Analog Integrated Circuits · Vol. 12, Issue 1, 2026 · pp. 14–23 Read article
-
Rural electrification through micro-grid design case study
Abstract: We introduce the design and experimental demonstration of a scalable DC micro-grid for rural electrification in the developing regions. The distributed control of the grid voltage is one of the main features of the DC micro-grid architecture, which allows both instantaneous power sharing and a metric for available grid power. A droop-voltage power-sharing scheme is utilized wherein the bus voltage decreases in response to low supply/high demand. Besides that, the …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
Sustainable Cementitious Composites withEpoxy–Alccofine Synergy
Abstract: This research examines the combined influence of epoxy resin and Alccofine when used as partial substitutes for cement in producing sustainable, high-performance concrete. The study aims to improve both strength and durability properties while simultaneously reducing cement usage and its environmental impact. Concrete mixes were prepared with epoxy resin contents of 0%, 5%, and 10% by weight of cement, along with Alccofine replacement levels of 5%, 10%, and 15%. The …
Published in International Journal of Concrete Technology · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Facile Synthesis and Electrochemical Exploration ofHexagonal Copper Sulfide (CuS) Nanocrystals for Energy Applications
Abstract: Copper sulfide (CuS) is a promising material for a variety of applications, including solar cells, lithium-ion batteries, sensors, and catalysts. In this current study, a facile technique for the synthesis of CuS nanocrystallites at modrate temperature 160°) without the use of any template or additives was reported. The reaction was carried out in a pressure reactor for 24 hours. he crystalline nature of the synthesized CuS nanocrystallites was confirmed using …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
A Comprehensive Review on Withania somnifera Species
Abstract: Withania somnifera (L.) Dunal, often referred to as Ashwagandha or Indian ginseng, is a renownedmedicinal herb widely utilized in traditional medical practices, especially Ayurveda, and it belongs tothe Solanaceae family. The plant has attracted considerable scientific interest because of its wide rangeof pharmacological effects and therapeutic possibilities. Different sections of this plant, particularly theroots and leaves, possess bioactive components that enhance its therapeutic properties. Many experimental and clinical studies have …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 12, Issue 1, 2026 Read article
-
Facile Synthesis and Electrochemical Exploration ofHexagonal Copper Sulfide (CuS) Nanocrystals for EnergyApplications
Abstract: Copper sulfide (CuS) is a promising material for a variety of applications, including solar cells, lithium-ion batteries, sensors, and catalysts. In this current study, a facile technique for the synthesis of CuS nanocrystallites at modrate temperature 160°) without the use of any template or additives was reported. The reaction was carried out in a pressure reactor for 24 hours. he crystalline nature of the synthesized CuS nanocrystallites was confirmed using …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
Unraveling the Health Risks of Microplastics in School Children Water Bottles: A Systematic Review
Abstract: Microplastics (MPs), pervasive environmental pollutants, pose escalating threats to human health, with children emerging as a critically vulnerable population. This systematic review, guided by PRISMA protocols, synthesizes evidence from 2015–2025 on MPs exposure risks from reusable plastic water bottles among school-aged children (4–15 years). Findings reveal significant MPs leaching into drinking water, influenced by bottle material such as PET and PP, usage duration, and cleaning practices. Children ingest an estimated …
Published in International Journal of Environmental Chemistry · Vol. 11, Issue 2, 2025 · pp. 20–35 Read article