Search
650 articles for “Temperature”
-
Computerized Fluent Simulation on Earth Tube Heat Exchanger Where Air as a Flow Medium
Abstract: In the present era renewable source of energy is free and abundant in nature and it must be brought into application. Due to excessive use of air conditioning systems, the chemicals cause global warming is a serious issue. The renewable energy is the main aim and objective of an earth tube heat exchanger, which uses the thermal energy of the ground for cooling and heating of the fluent. Here, Air …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 2, 2020 · pp. 49–68 Read article
-
Heat Generated Simulation with Bacteria and Fungi inCrude Oil Remediation in an Aerated Lagoon
Abstract: Studies on the heat generated by bacteria and fungi in an aerated lagoon were monitored by theapplication of MATLAB computed software simulation. Mathematical models were developed in termsof substrate utilization by microbes and correlated with the Monod’s equation model which revealedthe trend of heat generated at different operating temperature of 15°C, 30°C, 45°C, 60°C, 75°C, 90°C,105°C and 120°C. The heat generated varies with increase in the microbial concentration as favoredby …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 12, Issue 1, 2026 · pp. 27–45 Read article
-
THERMODYNAMICS OF HEAVY METALS (Hg2+, Cd2+, Fe2+AND Ni2+) ADSORPTION USING BOILER FLY ASH
Abstract: The effect of temperature on the adsorption of heavy metals, Hg2+, Cd2+, Fe2+ and Ni2+ using unactivated boiler fly ash (an agricultural waste) was investigated. The results showed that Hg2+ and Cd2+ ions were mostly affected by increase in temperature because their sorption rate decreased at high temperature. At the temperature of 273 K and 383 K, the amount of Hg2+ adsorbed (mg/g) by the unactivated boiler fly ash was …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 2, 2020 · pp. 25–34 Read article
-
Hot and Cold Fluid: The Concepts of Split Range Control Model
Abstract: The MATLAB tools were used in the research for monitoring the potential of hot and cold fluid application and the integrity of split range control model as related to the effect of temperature. The temperature of the cold fluid was within the room temperature and the temperature of the hot fluid was at elevated temperature. The research showcases decrease in hot fluid with increase in cold fluid, which demonstrate the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 1, 2023 · pp. 28–39 Read article
-
CFD on Parametric Analysis of Compression Ignition Engine by using Star CCM+
Abstract: Stringent emission from the conventional vehicles draws attention of automobile researches to develop engine either high fuel efficiency and low emission of NOx, CO and unburnt hydrocarbons. Hence, there by Homogeneous charge compression ignition came to the effect. Homogeneous charge compression ignition engine is the type of engine the well organised mixture of air and fuel ratio enters into the combustion chamber, and it is compressed up to auto-ignited temperature …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 7, Issue 2, 2021 · pp. 27–66 Read article
-
Predicting Water Distribution Pipe Thermal Abnormalities Caused by Wildfire
Abstract: The paper covers the temperature thermal control of the water distribution system by predicting the temperature exceeding the safe level at pipes' locations and shutting off the water access to the main distribution pipe. The advantages of predictive thermal control over setting the maximum allowed temperature are provided. The prediction uses a transient heat conduction model with an error function approximation for arbitrary distance from the surface. It is provided …
Published in International Journal of Environmental Chemistry · Vol. 11, Issue 2, 2025 · pp. 89–97 Read article
-
Enhancing the Heat Transfer in the Thermal Chimney by Attaching the Fin under CFD Analysis
Abstract: The primary and secondary heaters in heat exchangers were numerically evaluated at nominal temperatures of 140°C for the primary heaters, 100°C for the secondary heaters, and 20°C for the ambient temperature in order to validate the design idea for enhancing the air temperature. The “convective heat transfer” of air in a thermal chimney built to laboratory size using two different types of electrical heaters and a rectangular cross-section of constant …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 2, 2023 · pp. 9–26 Read article
-
Fabrication and Analysis of Multistage Evaporative Cooler and Comparison with Single-stage Cooler
Abstract: Nowadays air conditioning has become a vital appliance with increasing the living standard of human beings. However, excessive use of air conditioners (AC) turns into health issues and is also linked to global climatic changes. It has been observed that the effects of climate change increase the use of air conditioners affecting human wellness and sleeping conditions. Literature reveals that AC devices are primarily used in living rooms, bedrooms, offices, …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 2, 2023 · pp. 49–54 Read article
-
A Study on Machine-Learning-Driven Insight into theThermal Behavior of Polymers and Composite Materials
Abstract: The thermal performance of polymeric and composite systems underpins their suitability for aerospace, electronics, and energy‑storage applications, yet reliable prediction of temperature‑dependent properties remains a formidable challenge. In this work we present a data‑driven framework that harnesses modern machine‑learning (ML) techniques to forecast key thermal metrics – glass‑transition temperature (Tg), melting point (Tm), thermal conductivity (k), and decomposition onset (Td) – from a chemically informed descriptor space. A curated database …
Published in International Journal of Polymer Science and Engineering · Vol. 12, Issue 1, 2026 · pp. 1–11 Read article
-
IoT Based Smart RFID Application in Healthcare
Abstract: The Internet of Things has become a promising technology in recent years that expands the idea of the internet and makes it more widespread, enabling smooth communication between all kinds of devices. To connect “Everything” and make it smarter, the Internet of Things plays several roles, including identification, information gathering, exchange and processing, decision-making, and security. Two important technologies that facilitate intelligent decision-making across a range of applications are cloud …
Published in International Journal of Microwave Engineering and Technology · Vol. 10, Issue 2, 2024 · pp. 24–29 Read article
-
Ignition Characteristics for Thermal Runaways of Hazard Chemical Reactions of Different Degree of Reactions
Abstract: Thermal explosion characteristics of a hazardous chemical reaction of different reaction order have been investigated analytically and numerically for both Arrhenius and Frank-Kamenetskii approximation models for the rate of reaction. The critical conditions in the temperature-time, concentration-time, and temperature – concentration planes of solutions are presented. A comparison between the results of analytical solutions in these planes is offered. The solutions show that the critical states in the temperature-time plane …
Published in International Journal of Energetic Materials · Vol. 1, Issue 1, 2015 · pp. 31–55 Read article
-
Study of Mechanical Properties of Aluminum Nanocomposites using Auto Ignition Technique
Abstract: Al2O3 - high ZrO2 nanocomposite was synthesized by auto-ignition technique using metal nitrate and citric acid with a ratio of citrate: nitrate equal to 1:1.5. The precursor zirconium oxynitrite was derived from precipitation of zirconium oxycloride followed by dissolution of gel in nitric acid. The thermal decomposition behaviour of the gel was studied in order to study the decomposition behaviour and to determine the crystallization temperature. The effect of calcination …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 36–42 Read article
-
Advanced Materials and Protective Coatings for Enhanced Durability in Gas Turbine Engines
Abstract: Abstract Gas turbines are critical in modern power generation and propulsion systems, where high thermal efficiency, performance, and durability are essential. Operating at extreme temperatures and in aggressive chemical environments places significant stress on hot-section components, such as turbine blades, vanes, and combustor liners. To meet these demands, advanced high-temperature materials and protective coatings have been developed to ensure structural integrity, reduce maintenance, and improve operational lifespan. Nickel-based superalloys remain …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 1, 2025 · pp. 1–6 Read article
-
IoT based Crop Yield Prediction System using Arduino
Abstract: India is known as an agriculture country, where most villagers have agriculture as a main income source. Agriculture plays a vital role in the Indian economy. India has over 16% GDP based on agriculture. The production of various crops cultivated in India has its own role in the economy as importation and exportation is also important for India’s GDP. As we are progressing through this time, so called ‘progress’; is …
Published in International Journal of Analog Integrated Circuits · Vol. 10, Issue 2, 2024 · pp. 1–10 Read article
-
The Study of Magnetic Properties and Applications of II–VI Diluted Magnetic Semiconductor, Zn1–xMnxO Nanoparticles
Abstract: Ferromagnetism in II-VI diluted magnetic semiconductor, Zn1-xMnxO is studied. The magnetic behavior of this Diluted Magnetic Semiconductor (DMS) is determined by using the Heisenberg and the Green’s formalism. Heisenberg’s Model describes the Hamiltonian of the system in terms of spin density and excitons. In the same way, Green’s theorem is used for calculating magnetic quantities. These theorems are employed to estimate the origin of ferromagnetism in Zn1-xMnxO nanostructures. For spin- …
Published in International Journal of Applied Nanotechnology · Vol. 10, Issue 2, 2024 · pp. 47–55 Read article
-
FLUENT ANALYSIS ON EARTH HEAT EXCHANGER WHERE AIR AS A FLOW MEDIUM
Abstract: Renewable energy is the best source of energy. It is abundant in nature, it’s just like a gift of god. Nowadays, heating and cooling is a major issue in environment due to global warming. A major part of energy is being engaged in such issues. So Earth tube heat exchanger is a renewable source of energy for heating and cooling of any building. Here, in this study we will perform …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 43–68 Read article
-
Effect of nano Aluminum on Thermal Behavior and Ignition Characteristics of Al/KClO4 Thermite Composition
Abstract: Ignition experiments of micron size Al/KClO4 (ALCLO) thermite composition was carried out at high heating rate (40°C/min.) using DTA (differential thermal analysis), and it was observed that no ignition took place up to 700°C. Similarly in case of STA (simultaneous thermal analyzer) experiments, no ignition peaks were found up to 1100°C at 20/min. ALCLO when ignited in a bomb calorimeter for heat of combustion output measurement it produced a large …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 9–19 Read article
-
Thermodynamics Modelling And Performance Assessment Of Gas Turbine Power Plant
Abstract: In this study, thermodynamics modelling of gas turbine engine is performed based on thermodynamic relations. The thermodynamic model reveals that the influence of operating parameters including the compression ratio, turbine inlet temperature and ambient temperature has significant effect on the performance of gas turbine engine. Energy and exergy analyses were conducted to evaluate performance of the selected power plant and to assess the effect of operating parameters on energy loss …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 1, Issue 1, 2015 · pp. 11–35 Read article
-
A Overview on Reimagining MOSFET as Precision Thermal Sensor
Abstract: In the landscape of modern microelectronics, the transition from discrete sensing components to fully integrated silicon solutions have become a necessity for the advancement of the Internet of Things (IoT) and high-performance computing. This design explores the utilization of the MOSFET as a primary temperature-sensing transducer, leveraging its inherent thermal sensitivity rather than treating heat as a parasitic interference. By operating the MOSFET in the subthreshold (weak inversion) or saturation …
Published in International Journal of Analog Integrated Circuits · Vol. 12, Issue 1, 2026 · pp. 8–13 Read article
-
Nanotechnology in Refractory Materials: Innovations and Applications
Abstract: Nanotechnology has become a focal point of research across diverse scientific fields, including chemistry, medicine, materials science, and engineering. Its integration into refractory products has led to groundbreaking advancements in industries such as steel, glass, casting, and cement, particularly using nanomaterials like nanoparticles, nano additives, and nanostructured materials. This article provides an in-depth examination of the latest developments in monolithic refractories, focusing on how nanotechnology has enhanced their performance, durability, …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 7–11 Read article