Search
314 articles for “Reinforcement”
-
Analysis of various thicknesses of Shear Wall with Opening and without Opening and their Percentage Reinforcement
Abstract: Due to increase in population spacing in India is needed, especially in urban areas. Structural engineers in the seismic regions across the world often face the pressure to design high rise buildings with stiffness irregularities, even though they know these buildings are vulnerable under seismic loading. Today’s tall buildings are becoming more and more slender, leading to the possibility of more sway in comparison with earlier high rise buildings. Improving …
Published in International Journal of Construction Engineering and Planning · Vol. 2, Issue 1, 2016 · pp. 27–33 Read article
-
Performance of Temperature on Compressive and Shear Strength of High Strength Fiber Reinforced Concrete
Abstract: ABSTRACT This paper presents the results of the experimental investigation of various strengths at elevated temperature of high strength fiber reinforced concrete (HSFRC). Variables considered in the research work are various strengths, temperature and fiber volume fractions. Various strengths considered for investigation are compressive strength, shear strength. Concrete mix of M60 grade and crimped steel fibers with aspect ratio 50 are used. The fiber volume fraction is varied from 1 …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 13–23 Read article
-
A Study on Mechanical Properties and Fracture Behavior of Chopped Fiber Reinforced Self-Compacting Concrete
Abstract: The development of self-compacting concrete (SCC) is innovatory landmark in the history of construction industry resulting in predominant usage of SCC worldwide nowadays. It has many advantages over normal concrete in terms of enhancement in productivity, reduction in labor and overall cost, excellent finished product with excellent mechanical response and durability. Further, incorporation of fibers enhances its properties specially related to post crack behavior of SCC. Hence, the aim of …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 90–122 Read article
-
Influence of Type and Size of Fine Aggregate on Glass Fiber Reinforced Self-Compacting Mortars (GFRSCM)
Abstract: Abstract This paper addresses the fresh and hardened state behavior of glass fiber reinforced self-compacting mortars (GFSCMs) with various types and sizes of fine aggregate. Mini-slump flow and mini V-funnel tests were performed to evaluate the workability of GFSCMs. Compressive strength, split tensile strength, and flexural strength tests at the end of 28 days of water curing were determined. Water sorptivity tests were conducted on 28-day cured cube specimens. The …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 63–71 Read article
-
Review Study on re-strengthening of reinforced concrete circular column using steel strips
Abstract: This technique fixes thin steel plates i.e. steel encasement or tie plates i.e. steel cage around the column with steel angles at each corner, clamped to the concrete and welded together. Adequate tightening of the jackets can be ensured by means of heat tensioning. The use of steel jackets can enhance the shear strength of columns considerably. However, due to their low flexural stiffness they typically have poor confinement efficiency …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 1–9 Read article
-
Suitability of Bamboo as a Reinforcing Material in Flexible Pavement Design
Abstract: In Engineering Programme, soil stabilizations very much important for gaining proper knowledge about ground improvement. Ground improvement technique is one of the challenging task involving inputs from geotechnical engineering sector. In our project, we had to go through different techniques for improving the engineering characteristics of the ground. Through this project an endeavor attempt was made to improve the ground using bamboo as a reinforcing material for flexible pavement considering …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 47–69 Read article
-
Evaluating the Capabilities of Reinforced Concrete Open Ground Storey Frames Through Nonlinear Static Analysis
Abstract: The lack of infill in multi-story buildings in urban India, particularly on the ground floor or other floors for purposes such as parking or open storefronts, can result in vertical stiffness irregularity and make the structure more vulnerable to earthquakes. The practice of incorporating open first stories in seismic active areas is widely regarded as undesirable due to the risk of building collapse during earthquakes. With advancements in computer technology …
Published in International Journal of Structural Engineering and Analysis · Vol. 8, Issue 2, 2022 · pp. 31–37 Read article
-
ASSESSMENT OF REINFORCEMENT FOR TIES USED IN PIER FOR STEEL GIRDER RAILWAY BRIDGE (TWO TRACKS)
Abstract: The load on Pier will be taken into account due to the load of train and load of steel girder. The pier has the tendency to buckle. The permissible lateral displacement is taken as 10 mm. The moment caused due to the applied load on pier is P x e where P is the load acting on concrete pier and e is the lateral displacement of pier = 10 mm. …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 8, Issue 2, 2022 · pp. 22–27 Read article
-
Taguchi based validation of wear prediction for Zirconium dioxide particulate reinforced Aluminium 7068 composites
Abstract: The current work emphasis on the tribological characterization of Zirconium dioxide (Zirconia, ZrO2) particulates reinforced Aluminium 7068 metal matrix composites for different process variables established following design of experiments methodology and consequent taguchi based validation techniques for wear prediction. The pin on disc wear test is carried out on specimens fabricated enroute ultrasonic assisted stir casting with controlled dispersion of 12 Wt.% of ZrO2 and subsequent machining of the castings …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 37–50 Read article
-
ENHANCEMENT OF MECHANICAL PROPERTIES OF ALLOY 61S BY REINFORCING NANO COMPOSITES
Abstract: During recent decades, a lot of interest had shown in the materials production with nano sized grains. Especially, the aluminum alloys and its composites are widely used for demanding structural applications due to combination of corrosion resistance, formability, weldability and, mechanical properties. The demand for toughness, higher strength and, strength and weight ratio of aluminum alloys for the structural application is ever growing owing to the increasing importance of achieving …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 18–36 Read article
-
Effect of Nano-size Silicon Carbide (SiC) Reinforced Al 8088 Alloy in an Alkaline Medium using Static Immersion Method
Abstract: In this investigation, an strive has been made to broadenAl 8088reinforced with silicon carbide particulatenanocompositethrough liquid melt metallurgy method and to look at corrosion conduct.nanocomposite containing 2, 4 and 6 percent of SiC are preparedconsistent with ASTM requirements. Weight loss approach is carried out in 0.025N, 0.05N and 0.1N answers of KOH. The corrosion price decreases with boomin thepublicity time for all the specimens and decreases with the boom in …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 1, 2020 · pp. 8–13 Read article
-
Effect of Nanoclay on the Performance of Calotopis Gigantea Fiber Reinforced Thermoplastic Composites at Distinct Temperature
Abstract: Polymer-based nanocomposite is a developing subject that attracts many researchers due to its special qualities and versatility. Because the specific surface areas of nanofillers in nanocomposites are so high, it is much simpler to produce mechanical properties at the interface. Furthermore, a favorable interaction between the nanofillers and polymer matrix may manifest itself even at comparatively lower percentages of loading nanofillers. Thus, a smart, adaptive polymer nanocomposite material with the …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Drilling of Fibre Reinforced Plastics (FRPs) Materials: A Literature Survey
Abstract: The use of polymer composite materials has increased rapidly over the last decade and the numbers of papers for the machining of these materials has also increased. The aim of this paper is to present a literature survey on the resins, properties, the superiority of the hole produced in drilling of the fibre reinforced plastics (FRPs), different techniques used to detect the defects in composite structures that may be caused …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 1, 2015 · pp. 14–31 Read article
-
Influence of Concentration Variation of Chemical Pre Treatments on Tensile Properties of Coir Fibre Reinforced Composites
Abstract: Composite material consisting randomly oriented coir fibres and epoxy resin have been studied. This study tends to analyze the tensile properties of coir fibre (10mm length) reinforced with epoxy resin by treating with Na0H and KMn04 of different concentrations. Fibers are bonded together with epoxy resin by hand layup process and cured at room temperature for 24 hours to form composite. Different tensile properties of composite were investigated in accordance …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 13–20 Read article
-
Mechanical Behavior of AA7075/Glass Fiber Reinforced Polymer Composites
Abstract: This paper reports on the mechanical properties of As-cast and heat-treated AA7075 polymer composites reinforced with glass fibers from 1 to 5 wt%. The polymer composites were fabricated using the Compo casting method, in which short glass fibers were introduced into the vortex created in the molten alloy through an impeller rotated at 500 rpm. The molten mass was thoroughly stirred and poured into permanent molds and squeezed under pressure. …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 11–20 Read article
-
Advancements in Manufacturing Techniques for High-performance Fiber-reinforced Composite Materials
Abstract: This article explores the recent advancements in manufacturing techniques for high-performance fiber-reinforced composite materials. Composite materials have gained significant attention in various industries due to their exceptional mechanical properties, lightweight nature, and design flexibility. The continuous development of manufacturing methods has enabled the production of composites with improved performance, increased productivity, and reduced costs. This article reviews key manufacturing processes, such as automated fiber placement, resin transfer molding, and additive …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 35–42 Read article
-
Mechanical Behavior of Glass Fiber Reinforced Polyester Composites Modified with Silane Treated Alumina Nanofibers Subjected to Low-Velocity Impact
Abstract: The rise in demand and interest in lightweight offshore structures for marine, defense, automotive, and aerospace applications require nanoparticle enhancement of fiber-reinforced composite materials. When exposed to low-velocity Impact during service, these materials experience drastic changes and degradation in their macro-and microstructures. Therefore, it is critical to have a detailed comprehension of these materials' mechanical behavior and failure mechanisms. Within the scope of the current study, low-velocity impact behavior of …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 55–73 Read article
-
Experimental evaluation of dc Conductivity of Rice Husk Reinforced Polypropylene Composites with addition of cenosphere
Abstract: Insulating materials are used in electrical power circuits to prevent leakages of current. Main objective of this study is to evaluate the dc conductivity of rice husk filled polypropylene composites with and without cenosphere. The conductivity at room temperature was found to decreases from 2.64e-13 to 9.371e-14 S cm-1 with the addition of cenosphere. Dense packing of the material, collapse of pores and decreases in air gap between the rice …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 20–27 Read article
-
Fibre reinforced polymers for compressed hydrogen storage vessels: An overview
Abstract: Fibre reinforced plastics (FRPs) represent an interesting class of composite materials that is gaining importance in the fabrication of various mechanical components as a substitute for metals and alloys, particularly lightweight and high strength pressure vessels for compressed gas storage. They are an important component of hydrogen energy system for vehicular applications, where compact and safe on-board storage of hydrogen gas as a fuel at high pressures of up to …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 1, 2018 · pp. 18–29 Read article
-
Preparation and Evaluation of Plant-Based Coir Fiber-Reinforced Polypropylene Composites
Abstract: In the present article, unidirectional coir fiber (CF) and alkali-treated CF (ACF) were incorporated in polypropylene (PP) with and without 3-aminopropyl trimethoxy silane (AS) and tetramethoxy orthosilicate (TS) to produce composites by a compression molding technique. The basic properties of PP/CF composites (e.g. tensile strength, tensile modulus, impact strength, and water absorption) have enhanced with increasing CF content. The incorporation of AS and TS after alkali pretreatment for CF composites …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 34–47 Read article