Search
927 articles for “optimization”
-
Modeling 28 Days’ Curing Compressive Strength of Concrete Partially Replaced with Palm Kernel Shell as Aggregate Influenced by Porosity
Abstract: Twenty-eight days of curing to determine compressive strength of concrete were carried out throughthe application of modeling and simulation. The development of concrete compressive strength wascarried out by integrating palm kernel shell (PKS) as partial replacement for aggregate. Studies weremonitored to determine its rates of strength development by partially replacing PKS at differentpercentage of 5%, 10%, 15%, 20%, and 25% to determine the optimum compressive strength withinthe applied percentage of …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 26–40 Read article
-
A New Model for Prediction of Wellbore Stability Using the Three Dimensional Hoek–Brown Failure Criterion
Abstract: Wellbore stability is one of the crucial issues in oil and gas industries. The issues related to instability of wells, impose significant unwanted costs on drilling operation.The objective of this paper is to present the 3D-wellbore stability prediction models for vertical wellbores. The three dimensional Hoek–Brown strength criterion developed by Zhang and Zhu conjunction with linear poroelastic constitutive model is utilized to develop the models. This models leads to easily …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 2, 2017 · pp. 10–15 Read article
-
A Review of Geophysical, Geochemical and Geotechnical Study of the Marine Soil of Mahakalapada With Special Allusion to Its Stratigraphic Set-up
Abstract: The present study deals with the marine soil properties collected from Mahakalapada of Kendrapara district in Odisha. Five numbers of saturated soil samples were collected from 2ʹ to 3ʹ below the earth surface and were mixed thoroughly to get the best result. The soil was initially air dried in open atmosphere prior to the testing. The various properties of each sample was calculated either in-situ or in the laboratory. The …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 2, 2017 · pp. 16–23 Read article
-
A STYDY ON MECHANICAL PROPERTIES UNDER THE INFLUENCE OF FELDSPAR ACTIVATOR ON GEOPOLYMERIZATION OF REDMUD AND GGBS
Abstract: It is well known fact that the Ordinary Portland Cement (OPC) is most important construction material. Keeping in view the hazardous effects of Portland cement on environment, efforts are being put to reduce use of cement in concrete with its partial or full replacement by various waste materials such as Red mud (RM), Ground Granulated Blas Furnace Slag (GGBFS or GGBS), Flyash, Silica fume etc.. Geopolymer Concrete (GPC) is a …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 1–8 Read article
-
Effects of granulated waste glass and micro steel fiber on shear strength parameters of sand
Abstract: During the construction of the various structures, soil strength plays a vital role in structural performance. Hence, soil improvement techniques are needed to improve soil strength as well. This study aimed to improve shear strength of sandy soil using Granulated waste glass (GWG) and Micro steel fiber (MSF). In order to apply this idea, there have been taken two kinds of sandy soil such as fine sand (locally available in …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 35–42 Read article
-
Soil Reinforcement Using Waste Plastic Materials
Abstract: Soil reinforcement is a ground improvement techniques used in different civil engineering structures like earth retaining structures, embankment, foundations, road construction, etc.In this study, an attempt was made to collect the soil samples in such a way that it has different plasticity index. Accordingly, samples from surrounding areas of the Kanpur were collected and analyzed for their plasticity index. It was observed that three locations such as PSIT Campus, Naramau …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 10–20 Read article
-
Steepening Pit Walls- Geotechnical and Economic Implications
Abstract: Current approach to pit-wall analysis tends to separate designs into distinct categories. The first consideration involves analysis of slope in which discontinuities actively participate in the failure mobilization. The second involves design analysis of non-structural controls which could results in a wide range of failure mechanisms. The third and the least sought for approach is the economic assessment of the slope design which could render optimized pit slope and the …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 1, 2021 · pp. 45–57 Read article
-
Farming on Phone: Understanding Cotton Farmers’ Intentions and Feasibility to Adopt ICT-based Agro Advisory Services in Maharashtra, India
Abstract: The use of ICT tools in the agriculture sector for rural farmers has emerged as a potential for empowering farmers and improving their livelihoods as the phone-based agro-advisory services provide farmers with access to tailored relevant information to help them make better decisions about agricultural activities, crop yields, and better management of natural resources. However, understanding the impact of social structure on ICT adoption and perceived impacts is important to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 2, 2022 · pp. 14–25 Read article
-
An Evaluative Analysis of the Utilization of Artificial Neural Networks in Forecasting Soil Engineering Characteristics: An Overview Study
Abstract: The primary objective of utilizing synthetic neural networks was to emulate the problem-solving approach akin to the human brain. This approach of employing artificial neural networks gained extensive traction within the realm of geotechnical engineering, where the engineering properties of soil play a pivotal role in ensuring the stability of various engineering structures. The primary concern revolves around the strength and deformation characteristics exhibited by soil masses. The focus lies …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 1, 2023 · pp. 55–63 Read article
-
Structural Behavior of Cold Form Steel Truss
Abstract: This paper presents analytical observation results on the performance of Cold Formed Steel Truss and Hot rolled Steel Truss. Two trusses of same dimensions and same type with different materials have been studied and compared. Both the materials are compared on the basis of “fast, better and economic construction”. One truss is completely designed and analyzed in Hot rolled steel while the same model is designed in Cold Formed steel. …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 1, 2021 · pp. 16–23 Read article
-
Design and Comparative Analysis of Pratt Roof Trusses Using Angular and Tubular Steel Sections through Limit State Method
Abstract: A Pratt truss is a type of truss structure which is used in civil engineering to support heavy loads. It is comprised by the diagonal members and vertical members, which transmits the loads efficiently through a combination of tension and compression which is easy to construction and suitable for both short and medium span. But this project work is made to decide to structural performance employing angular and tubular steel …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 2, 2023 · pp. 61–72 Read article
-
Assessment of Pedestrian Walking Characteristics at Erbil CBD
Abstract: To enable and encourage walking, understanding of the characteristics of pedestrian movements is vital. The restrictions on vehicular movement, and scarcity of parking lots had changed the whole traffic movement to the unserviceable condition. Therefore, walking is considered as the most efficient mode of transportation at Erbil CBD area. In developing countries like Iraq, however, the recognition of the importance of pedestrian walking studies is still infancy; the published data …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 1, Issue 2, 2015 · pp. 1–10 Read article
-
Re-characterizing of Asphalt Concrete Mix Design Properties Blended with Waste Engine Oil Fractions for Heavy Traffic. (Case Study; Stability and Density)
Abstract: Waste and rising cost of importing admixtures during construction have influenced research into better ways of recycling local waste and reduce cost of importation of admixtures. Waste Engine Oil are checked as non-bituminous and can be incorporated into asphalt concrete mix design. Different researches have shown that some waste/by-products can be included as additive in hot-blend black-top cement to acquire specific beneficial properties. It is on this basis that this …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 8, Issue 1, 2022 · pp. 14–17 Read article
-
An Investigation into the Mechanical and Strength Properties of Rubberized Asphalt Concrete
Abstract: In this study, the suitability of large rubber chunks from shredded tires as aggregates in cold mixes for road construction is investigated. The rubber was used as an additive to the asphalt binder. Thirty percent of rubber by weight was introduced into the binder at a higher temperature and the rubber was allowed to react with the binder. It was shown among other findings that for various particle sizes, the …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 1, 2018 · pp. 11–16 Read article
-
Studying the Effect of Crumb Rubber Inclusion in the Mix Design Properties of HMA Pavement: A Case Study of Light Traffic
Abstract: Improving the performance of flexible road pavement has been one of the major concerns in highway engineering; these are due to the twin problems of temperature and oxidation that were observed to impede its performance during use. One the fundamental aim of this study is to explore the techniques of crumb rubber inclusion (in 0%, 5%, 10%, 15%, 20% and 25%), these severs as modifier to the mix design properties …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 1, 2018 · pp. 26–32 Read article
-
Evaluating the Rate of Response on Asphalt Concrete Mix Permeability Influenced by Non-Bituminous Modifier on Light Traffic
Abstract: Characterization of material property is fundamental in the Mechanistic-Empirical design of flexible pavement. One such key material property is the stiffness of the pavement these influences tensile strain levels and is imperative for either the determination or pavement cracking synonymous with pavement life. It is on this basis, that the present study explored techniques that will improve the performance of flexible road pavement by modifying its stiffness; dynamic modulus, E* …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 1, 2018 · pp. 33–39 Read article
-
EFFECT OF FLY- ASH AND CEMENT ON EXPANSIVE SOIL FOR FLEXIBLE PAVEMENT DESIGN
Abstract: Out of the many types of soils that prevail on the Earth’s crust Expansive soils are observed to be highly problematic by nature. Particularly under conditions of loading, these soils are highly prone to fail due to shear, crushing or excessive settlement. These factors end up expansive soils as unsuitable soils for any construction. If the strength of the soil is poor, then soil stabilization is duly needed. Stabilization is …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 5, Issue 2, 2019 · pp. 48–55 Read article
-
Improving the Performance of Highway Construction Projects: A managerial approach
Abstract: Highway Construction sector in India is much important as it is the 2nd largest road network in the world with 5.89 million kilometers. Government policies focus on increasing the private participation for infusion of funds in the road development projects. This has attracted the foreign investors participation with many private sectors entering this business through Private Public Partnerships (PPP).In the Highway construction process better Construction Management strategies are still required …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 6, Issue 2, 2020 · pp. 19–30 Read article
-
Influence of Waste Plastic Dosage on Bituminous Concrete Mix Design Properties
Abstract: Nowadays there is a lot of focus and concern regarding handling waste plastics in order to minimize pollution caused by it to the environment, human life and marine species. Hence to mitigate these problem waste plastics are currently used in the construction of flexible pavements. In the current practices, waste plastics are added to the preheated aggregate which may have a slight improvement in the volumetric property of bituminous mixtures. …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 8, Issue 1, 2022 · pp. 33–39 Read article
-
ASSESSMENT OF FOUNDATION SIZE AND REINFORCEMENT USED FOR FOUNDATION BASE OF PIER FOR STEEL GIRDER RAILWAY BRIDGE.
Abstract: The analysis of foundation size and reinforcement is conducted with respect to the overall load exerted on the foundation base. This includes considering the load imposed by trains, the weight of the girder, and the pier. To ensure the structural integrity and stability of the foundation base, M25 grade concrete and Fe 500 grade steel are utilized. In order to counteract bending forces, 20 φ diameter steel bars are incorporated …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 9, Issue 1, 2023 · pp. 13–18 Read article