Search
2000 articles for “effect” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Adverse Effects of Copper Extraction on the Environment and Living Things
Abstract: The extraction procedures are known as heap and situ leaching; throughout these procedures, particles react with one another to produce acidic mists that not only hurt people’s skin, eyes, and lungs but also ruin crops, degrade the quality of the land, and injure surrounding structures. It tastes awful and stinks like acid dust. The ore typically needs to be beneficiated as with all mining processes. The methods of processing are …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 10–15 Read article
-
Studying the Effects of Extracts that Prevent Corrosion on Sheet Metal in an Acidic Condition
Abstract: The prevention of corrosion in steel materials in acidic conditions is summarized in this paper. There are many accelerated corrosion preventives for acidic solutions available. High temperatures, lowgrade steels, and HCl solutions are the main focus points. The creation of corrosion inhibitor compositions which combine corrosion inhibitors with surfactants, solvents, and expressions to increase the potency of single compounds at extreme temperatures is another focus of this analysis. This review’s …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 22–26 Read article
-
Effect of Nano-size Silicon Carbide (SiC) Reinforced Al 8088 Alloy in an Alkaline Medium using Static Immersion Method
Abstract: In this investigation, an strive has been made to broadenAl 8088reinforced with silicon carbide particulatenanocompositethrough liquid melt metallurgy method and to look at corrosion conduct.nanocomposite containing 2, 4 and 6 percent of SiC are preparedconsistent with ASTM requirements. Weight loss approach is carried out in 0.025N, 0.05N and 0.1N answers of KOH. The corrosion price decreases with boomin thepublicity time for all the specimens and decreases with the boom in …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 1, 2020 · pp. 8–13 Read article
-
Effect of Nanoclay on the Performance of Calotopis Gigantea Fiber Reinforced Thermoplastic Composites at Distinct Temperature
Abstract: Polymer-based nanocomposite is a developing subject that attracts many researchers due to its special qualities and versatility. Because the specific surface areas of nanofillers in nanocomposites are so high, it is much simpler to produce mechanical properties at the interface. Furthermore, a favorable interaction between the nanofillers and polymer matrix may manifest itself even at comparatively lower percentages of loading nanofillers. Thus, a smart, adaptive polymer nanocomposite material with the …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Development of Epoxy Based Hybrid Composite Reinforced with Jute and Glass-fiber and Effect of Silicon Carbide additive on it’s Mechanical Properties
Abstract: In this project, an effort is made to compare the improvement of the matrix material properties because of the presence of the fillers and additives. Initially, hand lay-up process was carried out in a mold of known dimensions to layup jute fibers of varying weight percentages in the epoxy matrix. Another composite with glass fibers of similar weight percentages to that of jute were laid up in epoxy matrix in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 8–12 Read article
-
Assessment of Polymer Nanocomposite for Packaging Uses and Concerns about Environmental and Health Effects
Abstract: A nanocomposite material is composed of several phases with at least one, two, or three dimensions in the nanoscale range. When material dimensions are lowered to the nanoscale, phase interfaces are created, and they are essential for enhancing the material's characteristics. The surface area to volume ratio of the reinforced material used to create nanocomposites has a direct bearing on how structure and property relate to one another. Due to …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 10–36 Read article
-
Effect of Fly Ash Cenosphere on Electric Properties of Polypropylene
Abstract: Present work deals with findings on electrical properties of cenosphere filled polypropylene composites. Frequency dependence of the dielectric constant (ε’) of the composite samples was carried out at ambient temperature. A theoretical model is proposed for the electrical conductivity of porous polypropylene/cenosphere composites. Role of addition of these cenosphere particles on electrical properties such as dielectric constant, tanδ, dc conductivity and ac conductivity were investigated. Increase of fly ash cenosphere …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 7–19 Read article
-
Effect of Addition of Phosphates on Thermal, Physical and Mechanical Properties of Phenolic and Amino Bonded Wood Composite
Abstract: Properties of flame retardant molecule board made by treating the molecule (crowded deltoids) with mono ammonium hosphate/diammonium phosphate (MAP/DAP) creation were examined. Two convergences of (0, 1, and 2%) of flame retardants ere joined to the particles on broiler dry weight of the particles. Melamine Urea Formaldehyde tar (MUF) and phenol formaldehyde pitch (PF) were utilized to produce the exploratory boards. The fire retardancy and warm strength of the composites …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 8–14 Read article
-
Compatibilizing Effect of Modified Polypropylene on the Properties of Polypropylene/Organically Modified Layered Silicate Nanocomposites
Abstract: In the present research paper, a series of polypropylene (PP) nanocomposites containing 3, 5, and 7 wt% of an organically modified layered silicate (OM) were prepared via direct melt mixing in the presence of maleic anhydride grafted polypropylene (indicated as PP-g-MA, PPMA), and hexamethylenediamine-modified maleic anhydride grafted polypropylene (marked as PP-g-HMDA, PPHMDA) as compatibilizing agent at concentration of 10 wt%. Subsequently the influences of the compatibilizer on the morphological, mechanical, …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 8–19 Read article
-
Effect of Coupling Agent on Organoclay Dispersion in Polyethylene/Organoclay Nanocomposites for Packaging Industry
Abstract: Low-density polyethylene (LDPE) is one of the most widely used polymers in various fields, but due to the hydrophobic nature of LDPE, it is hard to prepare an LDPE/clay nanocomposite. In this article, an LDPE/organoclay nanocomposite, which can be used in the packaging industry, was prepared by melt-blending organoclay with a polymer matrix (LDPE) and compatibilizer, low molecular weight oxidized polyethylene. The influences of organoclay, and compatibilizer during melt mixing …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 1–11 Read article
-
Enhancement of Power Factor and Effective Performance of an Induction Motor Based Converter-Fed Rotor
Abstract: Abstract— Taking a novel concept of a rotor that is fed by a converter, this paper attempts to investigate an induction machine. In this the stator has been directly connected to the grid and it is also Y connected while the rotor windings are open-ended fed to a back-to-back converter with a floating capacitor. The factors that are carefully studied are the power factor and the efficiency improvements of the …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 1, 2018 · pp. 10–19 Read article
-
Short Report on the Effect of Atmospheric Dielectric Barrier Discharge Plasma Processing to Control the Capillary Flow in Polymer based Microfluidic Devices
Abstract: In this experimental work, a couple of microfluidic devices are fabricated by polymethylmethacrylate (PMMA) using the maskless lithography, hot embossing lithography and direct bonding technique. One device is fabricated by pristine PMMA, and the other device is fabricated by dielectric barrier discharge (DBD) plasma processed PMMA. Dyed water is selected and prepared as working liquid. Each surface-driven capillary flow of dyed water is recorded by a CMOS camera. This work …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 2, 2020 · pp. 1–4 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
Effect of Burr Height in Drilling Low Carbon Steels for Different Drill Point Angles
Abstract: In the present work low carbon steel have been used to observe the burr height at the exit end of the workpiece of a drilled hole under different machining conditions. Three uncoated 12 mm diameter HSS twist drills are used. These drills have different drill point angles, i.e., 118°, 100°, 80°. All the experiments are carried out on a CNC milling machine with and without the application of coolant. Cutting …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 24–37 Read article
-
CFD Study on the Effect of Air Bubble Injection Performance of a Horizontal Helical Shell and Coiled Tube Heat Exchanger
Abstract: In present review, a shell and curled cylinder heat exchanger will be numerically considered. The creation technique for helically looped tube which contains turbulator and furthermore the impacts of turbulator on warm and frictional qualities of hotness exchanger will be introduced in this review. CFD examination on ANSYS FUENT programming will be acted in two principle modes. In first mode, the liquid of looped cylinder will be water and in …
Published in International Journal of Mechanics and Design · Vol. 7, Issue 2, 2021 · pp. 1–29 Read article
-
Increasing an overall equipment effectiveness visibility and analyzing in a manufacturing industry
Abstract: The exploration for improving productivity in the current global competitive environment has created a need for rigorously defined performance measurement system in a manufacturing process. OEE, a vital KPI of TPM is used to evaluate performance and productivity of the machine. OEE is one of the performance evaluation methods that are most common and popular in the production industries. This paper tries to evaluate the OEE of machines in a …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 2, 2016 · pp. 89–103 Read article
-
Effect of Pulsed Current Micro Plasma Arc welding parameters on Mechanical properties AISI 304 and AISI 430 dissimilar weld joint
Abstract: In the present work, two dissimilar AISI 304 and AISI 430 sheets of 0.4mm thick welded using Micro Plasma Arc Welding. Welding input parameters like peak current, base current, pulse rate and pulse width are considered and output responses like fusion zone grain size, hardness and ultimate tensile strength of the welded joint are considered. 31 experiments are performed as per Central Composite Design (CCD) design matrix of Response Surface …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 1–26 Read article
-
Study the effect of lubrication on hardness in the ring compression test
Abstract: Mild Steel is commonly used to produce automotive parts such as shafts, gears and bearings. This paper focuses on the hardness distribution in the mild steel ring specimen after compress under rigid dies. Three different types of lubricants namely boric acid, Vaseline, grease and dry condition were employed as lubricants and the coefficient of friction corresponding to the lubricant evaluated using standard ‘Ring compression test’. The strain distributions obtained from …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 18–27 Read article
-
Experimental Investigations for Comparing the Effectiveness of Heat Treatment and Cryogenic Treatment on Wear Performance of EN-47 Spring Steel
Abstract: EN-47 spring steel is chromium, vanadium steel which consists of carbon (0.45–0.55%), manganese (0.50–0.80), silicon (0.50%), phosphorus (0.06%), and sulphur (0.06%) along with chromium (0.80–1.20%) and vanadium (0.15%). Due to this composition EN-47 spring steel become harder and tougher. It has a wide range of applications like crankshafts, steering knuckles, gears, spindles, pumps, suspension etc. So, in this experimental study we treated EN-47 spring steel with cryogenic treatment, cryogenic and …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Cooling and Heating Effect of Geothermal Energy and Its Thermal Analysis Using Air as a Flow Medium
Abstract: Geothermal energy is one of the renewable sources of energy, which exists free in the environment. The main concept of a geothermal energy is the thermal energy of the ground which is used for cooling and heating. Here, air is used as a flow medium. The flow medium gets cool in the summer and gets heated in the winter due to the temperature difference between the flow medium and underground …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 18–32 Read article