All articles

Published Subscription 14 Oct 2016

Nano Finishing of HDPE/Al2O3/HAp Ternary Composite Based Acetabular Socket using Polymer Rheological Abrasive Semisolid Medium

By Mamilla Ravi Sankar, Deepak Taye, M. Manohar, Debasish Sarkar, Bikramjit Basu

Abstract: Acetabular socket is one of the important parts of the hip joint. The surface roughness in the acetabular socket decides the friction and wear during the motion of the human. Low surface roughness in the acetabular socket gives free motion of hip joint as well as high joint life. Nano surface roughness on the inner surface of acetabular socket also reduce the particles generation during the dynamic motion between hip …

Published in International journal of Nanobiotechnology · Vol. 2, Issue 2, 2016 · pp. 5–8 Read article

Published Subscription 14 Oct 2016

Congestion Control in WDM Networks

By Himanshu Monga

Abstract: Because of enormous transmission of information through optical strands, congestion happened routinely and it turned into a major bottleneck to the stream of information in any procedure. Numerous techniques are there to keep away from congestion however those systems for the most part include colossal expense connected with quality certification. These systems are relevant to the zone which is rich in base and assets, however these procedures are extremely hard …

Published in International Journal of Telecommunications & Emerging Technologies · Vol. 2, Issue 2, 2016 · pp. 1–5 Read article

Published Subscription 13 Oct 2016

Advantage of Microsilica in Concrete Compressive Strength

By Ritu Charkhiya, Harbir Singh, Sonam Kumari, Neeraj Kumar, Shivender S

Abstract: Abstract Microsilica is an undefined sort of silica tidy for the most part gathered in sack house channels as by-result of the silicon and ferro-silicon generation. The paper condenses essential physical and synthetic properties of miniaturized scale silica and utilizes those outcomes for an assessment of small scale silica from a Health Safety and Environment (HSE) point of view. Small scale silica comprises of circular particles with a normal molecule …

Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 37–43 Read article

Published Subscription 11 Oct 2016

Kinetic and Thermodynamic Studies of Adsorption of Pb (II) by Using Ferrous Sulphide as an Adsorbent

By D. Kamalakar, C. V. Subrahmanayam, P. Rohinikumar, L. Nageswara Rao

Abstract: Poisoning of lead is causing a serious threat to the environment. In the present study the adsorption behaviour of lead was studied in detail by ferrous sulphide in granular form. Ferrous sulphide has the magnetic properties and makes it a better candidate for lead removal. Batch adsorption experiments were carried out by varying different process parameters such as contact time, adsorbent dose, pH, and temperature. Lead adsorption by ferrous sulphide …

Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 33–41 Read article

Published Subscription 10 Oct 2016

Modification of Cubic Equations of State for Polar Compounds

By Hitanshu Sachania

Abstract: Abstract Volumetric properties of substances are crucial thermodynamic parameters in that they aid personnel to compute other thermodynamic parameters like internal energy, enthalpy, entropy, etc. Moreover, these are required in the design of process equipment and in the sizing of pipelines. In 1873 van der Waals proposed an equation to predict volumetric properties of idealized gases. Hitherto, a plethora of such equations known as cubic equations of state have been …

Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 1, Issue 2, 2015 · pp. 1–11 Read article

Published Subscription 10 Oct 2016

Novel Ionic Liquids Supported Membranes: A Review

By Tejas T. Shetiye, Shamli S. Chavan, Swapnil A. Dharaskar

Abstract: In this work, a supported ionic liquid membrane (SILM) can be prepared by impregnating different types of polymers with suitable novel phosphonium-based ionic liquids (ILs). ILs have reached an enormous interest as CO2 solvents and other engineering applications due to their unique properties such as negligible vapour pressure and selectivity, making them very attractive in order to obtain stable supported liquid membranes. This work can appraise the preparation and use …

Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 2, 2016 · pp. 15–23 Read article

Published Subscription 7 Oct 2016

Electrolytic Deposition of Zn–Ni Alloy from Acidic Sulphate Bath and Their Characterization

By R. S. Bhat, J. Nayak, A. C. Hegde

Abstract: A bath containing ZnSO4.7H2O, NiSO4.7H2O, thiamine hydrochloride (THC) and citric acid (CA) has been proposed. Bright Zn–Ni alloy coatings were developed galvanostatically onto mild steel (MS) and their corrosion resistance and other physical properties were studied. THC was found to improve the brightness and homogeneity of the deposit. The dependency of bath composition, current density (c.d.), pH and temperature, agitation on wt.% Ni were tested. Deposition was carried out under …

Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 19–32 Read article

Published Subscription 6 Oct 2016

Biosynthesis, characterization of gold nanoparticles using M. indica leaf extractand their anticancer activity

By Rajiv Dutta

Abstract: The present study involves the novel approach for the synthesis of nanomaterial holds infinite possibilities as nanotechnology has a major impact on medicine and its application. Leaf extract of Mangiferaindicais a very good bioreductant for gold chloride (HAuCl4·4H2O) which leads to the synthesis of gold nanoparticles. Leaf extract of Mangiferaindicawas mixed with gold chloride (HAuCl4·4H2O) and UV-vis spectroscopy was used to detect the synthesis of nanoparticles. TEM and FESEM were …

Published in International journal of Nanobiotechnology · Vol. 2, Issue 2, 2016 · pp. 1–4 Read article

Published Subscription 3 Oct 2016

Wild Owls’ Foraging Efficiency Reduces Due to Traffic Noise

By Ankita Singh

Abstract: A group of specialists has found that wild owls searching effectiveness decreases because of Traffic clamor by up to 89 percent. The group's reality first study analyzed how diverse levels of such clamor influence the chasing productivity of these nighttime predators, which utilize a sharp sound-related sense to find prey in the obscurity

Published in International Journal of Transportation Engineering and Traffic System · Vol. 2, Issue 2, 2016 · pp. 41–42 Read article

Published Subscription 3 Oct 2016

Intelligent Transport System for the Development of Smart Cities

By Rohit Rathi

Abstract: Increment in activity thickness on the planet brings about more blockage, air contamination and mishaps. Consequently Intelligent Transport System (ITS) has been risen as an answer for different transport related issues. The point of this examination paper is to lead precise investigation on ITS. Strategies/Statistical Analysis: ITS is characterized as the arrangement of uses which are progress and plan to apply keen data and correspondence advancements keeping in mind the …

Published in International Journal of Transportation Engineering and Traffic System · Vol. 2, Issue 2, 2016 · pp. 20–29 Read article

Published Subscription 3 Oct 2016

Comparative Modeling of Pavement Surface Texture Variables Using ANN and SPSS Software

By Saad Issa Sarsam

Abstract: The health of Roadway pavement surface is considered as one of the major issues for safe driving. Pavement surface condition is usually referred to micro and macro textures which enhances the friction between the pavement surface and vehicular tires, while it provides a proper drainage for heavy rainfall water. Measurement of the surface texture is not yet standardized, and many different techniques are implemented by various road agencies around the …

Published in International Journal of Transportation Engineering and Traffic System · Vol. 2, Issue 2, 2016 · pp. 30–40 Read article

Published Subscription 3 Oct 2016

Influence of Moisture Damage on Resilient Modulus of Asphalt Concrete

By Saad Issa Sarsam

Abstract: Deterioration of asphalt concrete pavement by the action of moisture damage is a major problem facing the serviceability and durability of flexible pavement, it starts with micro cracking of the pavement surface due to load repetitions, and followed by stripping and disintegration of pavement layer. In this investigation, the influence of moisture damage on resilient modulus of asphalt concrete had been assessed under repeated tensile and shear stresses. Asphalt concrete …

Published in International Journal of Transportation Engineering and Traffic System · Vol. 2, Issue 2, 2016 · pp. 12–19 Read article

Published Subscription 3 Oct 2016

Health Impact of Pollutants

By Amit Kumar

Abstract: With the advent of industrial revolution, there has been a sharp rise in the atmospheric pollution contaminating the natural surroundings and negatively affecting the day-to-day lifestyle of living beings. Pollution is caused by waste materials of different forms that are dumped randomly on open areas or released into water bodies. Huge quantities of wastes come from the industries effluents which are toxic and highly hazardous. These include wastes from pulp …

Published in International Journal of Environmental Chemistry · Vol. 2, Issue 2, 2016 · pp. 1–2 Read article

Published Subscription 1 Oct 2016

Kinetic and Mechanistic Study of Oxidation of Benzydamine Hydrochloride by Permanganate (VII) in Acidic Medium

By V. Shastry, B. C. Sateesh, S. Shashidhar, T. N. Padmini, K. S. Ravindra

Abstract: The kinetics and mechanism of Permanganate (Mn (VII)) oxidation of Benzydamine hydrochloride (B.HCl) in acidic medium has been studied at 26 ± 0.1°C. The reaction shows first order dependence in [Mn (VII)], less than unit order in [B.HCl] and fractional order dependence in [H2SO4]. Variation of ionic strength by the addition of KCl has no significant effect on the rate. The stoichiometry of the reaction is found to be 1:4 …

Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 2, Issue 2, 2016 · pp. 20–28 Read article