Search
870 articles for “factor”
-
A parametric study for the behaviour of steel plate-anchor assembly embedded in concrete under cyclic loading
Abstract: Steel plate-anchor assembly embedded in concrete is a common type of connection system used for connecting structural steel members to concrete members. These assemblies are subjected to different loading cases depending on their use. Since the behaviour of such assemblies is quite complex and depends on a number of factors associated with different components, it was decided to adopt finite-element technique to obtain a reasonably accurate analytical solution for the …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 21–36 Read article
-
An overview on the rheology of recycled aggregate concrete with the influence of chemical admixtures
Abstract: : Concrete is one of the most widely used construction material because of its property to be moulded into any kind of structure and shape due to its fluidity at early stages. The fresh properties of concrete can be characterized by its flow behaviour. Rheology is the scientific description of flow properties. Super-plasticizers and air-entrainers are some of the most used chemical admixtures that affect the rheological parameters of fresh …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 14–24 Read article
-
Research on Partial Replacement of Fly Ash and Superplasticizer on Self Compacting Concrete
Abstract: In this project I have proposed a mix design procedure for self compacting concrete achieve the target mean strength in which mixes are designed on the basis of Indian Standards and suitable adjustments are done. The amount of fine aggregates, coarse aggregates, cement and mixing water as well as the dosage of superplasticizers to be used as a major factor influencing the properties of SCC in the plastic stage as …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 39–45 Read article
-
Spatial and Temporal Variation of Bioaerosols with Meteorology at Different Land Sites
Abstract: Air particulates associated with biological origins are termed as bioaerosols. These bioaerosols consist of different species of bacteria, fungi, pollen and spores, etc. and can be allergenic and infectious in nature. The study is an attempt to understand the seasonal variation in bioaerosols concentration at three different land use sites: site I (commercial site), site II (dumping site), Site III (vegetated site). Statistical correlation was applied to infer the relation …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 1, 2016 · pp. 12–20 Read article
-
Different Types of Pollutants and Their Impact (Soil, Air and Water)
Abstract: Pollution is an environmental problem that can lead to – among other things – global warming, acid rain, and the ozone hole formation. The status of air pollution is changing and there are many different air pollutants being a part to it. When pollutants are released into the air, they interact with each other in a complex manner depending on temperature, humidity and other environmental factors.
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 2, 2016 · pp. 24–30 Read article
-
Suitability of Bamboo as a Reinforcing Material in Flexible Pavement Design
Abstract: In Engineering Programme, soil stabilizations very much important for gaining proper knowledge about ground improvement. Ground improvement technique is one of the challenging task involving inputs from geotechnical engineering sector. In our project, we had to go through different techniques for improving the engineering characteristics of the ground. Through this project an endeavor attempt was made to improve the ground using bamboo as a reinforcing material for flexible pavement considering …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 47–69 Read article
-
Application of High Speed Videography and Digital Image Processing Software to Assess Performance of Blasts In Opencast Mines: A Case Study
Abstract: Rock mass can be fragmented by the process of blasting in which a known volume of the yield is obtained by using a calculated quantity of explosive. The explosive selected for blasting depends on factors like rock mass parameters, blasting economics and blast design. Assessment of the performance of a given blast is essential in the larger economics of the mining project. A study was conducted to know the blast …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 2, 2017 · pp. 1–9 Read article
-
The Environmental Impact of Soil Pollution on Human Health
Abstract: Soils are shaped by the decomposition of rock and organic matter over several years. Soil properties vary from place to place with difference in bedrock composition, climate and other factors. Certain chemical elements occur naturally in soils as components of minerals, yet may be toxic at some concentration. Various other potentially harmful substance may end up mixing with soils through human activities. This may lead to soil contamination which in …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 2, 2017 · pp. 29–34 Read article
-
Soil Reinforcement Using Waste Plastic Materials
Abstract: Soil reinforcement is a ground improvement techniques used in different civil engineering structures like earth retaining structures, embankment, foundations, road construction, etc.In this study, an attempt was made to collect the soil samples in such a way that it has different plasticity index. Accordingly, samples from surrounding areas of the Kanpur were collected and analyzed for their plasticity index. It was observed that three locations such as PSIT Campus, Naramau …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 10–20 Read article
-
The environmentally sustainable municipal solid waste management – case study of erode (d.t), india
Abstract: The municipal solid waste management system is an essential part of an environmental management system, municipal solid waste management generates enormous quantities of waste, due to urbanisation and development of many industries with many aspects. Disposal of municipal solid waste takes a high-risk factor in the environment condition. Solid waste can be modified into effective manner through 3R principles “reduce”, “reuse” and “recycle” ,the conversion of municipal solid waste aims, …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 1, 2021 · pp. 1–12 Read article
-
Dynamic Response of Reinforced Concrete Frame Considering Soil Structure Interaction
Abstract: Present study focus on the dynamic behavior of reinforced concrete frames considering soil structure interaction by performing linear static and dynamic analysis. A reinforced concrete frame having G+10 storey was considered. The investigation on the behavior of RC frame is carried out by using dynamic analysis i.e., Response Spectrum method. The modeling of RC frame is carried out by using finite element-based computer program i.e., STAAD.Pro. The investigation is carryout …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 2, 2021 · pp. 9–16 Read article
-
Predicting the Influence of Permeability’s on Settlement of Shallow Foundation
Abstract: Foundation settlement rose as soil permeability increased, excess pore pressure increased with depth, and decreased as shear modulus increased. The expanding soil cycle (shrinkage and expansion) that is principally responsible for foundation settlement is strongly related to water content. The application of modeling and simulation was used to monitor the effect of various soil properties on foundation settlement. But the focus of this study is on Permeability including other soil …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 1, 2023 · pp. 36–54 Read article
-
An Evaluative Analysis of the Utilization of Artificial Neural Networks in Forecasting Soil Engineering Characteristics: An Overview Study
Abstract: The primary objective of utilizing synthetic neural networks was to emulate the problem-solving approach akin to the human brain. This approach of employing artificial neural networks gained extensive traction within the realm of geotechnical engineering, where the engineering properties of soil play a pivotal role in ensuring the stability of various engineering structures. The primary concern revolves around the strength and deformation characteristics exhibited by soil masses. The focus lies …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 1, 2023 · pp. 55–63 Read article
-
A Study: The Impact on Productivity by Using an Ms-Excel program for Design of Axially Loaded Column With Biaxial Bending for Concrete Structures
Abstract: The design of columns is a day to day affair for professionals in the civil engineering field. Of the axially loaded columns, the ones with biaxial bending are of great significance as they are the columns in common use in residential buildings. The design of the columns consumes time and hence is a factor that affects the productivity of civil professionals working on the design of these columns. This paper …
Published in International Journal of Structural Engineering and Analysis · Vol. 2, Issue 1, 2016 · pp. 1–6 Read article
-
Flexure of Thick Fixed Beams Subjected to Varying Load using Shear Deformation Theory
Abstract: A refined shear deformation theory for flexural analysis of thick beams, considering transverse shear deformation effects, is developed. The number of variables as in the first order shear deformation theory is kept in present theory. The important feature of present theory is that the transverse shear stresses can directly be obtained using constitutive relations. The theory does not demand shear correction factors. The principle of virtual work is used to …
Published in International Journal of Structural Engineering and Analysis · Vol. 2, Issue 1, 2016 · pp. 23–31 Read article
-
Flexural Analysis of Thick Beam Subjected to Sine Load Using Refined Shear Deformation Theory
Abstract: A Hyperbolic Shear Deformation Theory (HPSDT) taking into account transverse shear deformation effects is used for the static flexure analysis of thick isotropic beams. The displacement field of the theory contains two variables. The hyperbolic sine and cosine function is used in the displacement field in terms of thickness coordinate to represent shear deformation. The transverse shear stress can be obtained directly from the use of constitutive relations, satisfying the …
Published in International Journal of Structural Engineering and Analysis · Vol. 2, Issue 2, 2016 · pp. 8–19 Read article
-
Comparative Static Analysis of Flat Slab Without Periphery of Beam Provided Infill and Shear Wall Panel at Different Storey
Abstract: In this paper, increased awareness for the need to evaluate and improve the seismic performance of flat slab without periphery of beam. There are several numbers of factors affecting the behavior of building. Stiffness irregularity in vertical direction is one of them, and as a result of which soft storey is formed. In the this paper work a parametric study is performed on flat slab without periphery beam with infill …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 1, 2017 · pp. 37–44 Read article
-
Comparative statis analysis of Regular and irregular building
Abstract: ABSTRACT: In this paper is increased safety and evaluate the seismic performance of Irregular and Regular building. There are several numbers of factors affecting the behavior of building. In the this paper work a parametric study is performed on Irregular and Regular plan of building with infill wall 230 mm thick and internal wall 115 mm thick provide at G+15 storey with Regular and Irregular building in seismic zone IV …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 2, 2017 · pp. 29–34 Read article
-
Analysis of Cracks in Structure and Remedies
Abstract: Cracking the most difficult challenge faced by Engineer is to be carried out as a process of repairs and remedial measures which are to be important for cracks. It is also important to view in particular way of the cause and the access to importance to be taken for prevention. For remedies or restoration of structure to be remain successful in producing a desired result & also necessary that the …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 1, 2018 · pp. 36–46 Read article
-
Thermo-elastic flexural analysis of cross-ply laminated beams
Abstract: The present paper is concerned with the thermal analysis of symmetric and antisymmetric cross ply laminated beams subjected to temperature distribution across the thickness of laminated beam. A higher order shear deformation theory is used. The displacement field in terms of thickness coordinate is expanded up to cubic term to have a quadratic variation of the transverse shear strains and transverse shear stresses. This avoids the need of shear correction …
Published in International Journal of Structural Engineering and Analysis · Vol. 6, Issue 1, 2020 · pp. 62–73 Read article