Search
2000 articles for “effect” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Dynamic Response of Bridges and its Effect on Soil Medium
Abstract: The analysis of dynamic behaviour of bridge structures that are subjected to moving loads has been one of the research benefits in recent years. Specifically in railway bridges, resonance ensues when the load frequency is equal to a multiple of natural frequency of the structure. Resonance vibrations have been practical in railway bridges, especially subjected to high-speed lines. They are caused primarily because of two reasons: one is the repeated …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 1, 2019 · pp. 28–34 Read article
-
Studying the Effect of Crumb Rubber Inclusion in the Mix Design Properties of HMA Pavement: A Case Study of Light Traffic
Abstract: Improving the performance of flexible road pavement has been one of the major concerns in highway engineering; these are due to the twin problems of temperature and oxidation that were observed to impede its performance during use. One the fundamental aim of this study is to explore the techniques of crumb rubber inclusion (in 0%, 5%, 10%, 15%, 20% and 25%), these severs as modifier to the mix design properties …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 1, 2018 · pp. 26–32 Read article
-
EFFECT OF FLY- ASH AND CEMENT ON EXPANSIVE SOIL FOR FLEXIBLE PAVEMENT DESIGN
Abstract: Out of the many types of soils that prevail on the Earth’s crust Expansive soils are observed to be highly problematic by nature. Particularly under conditions of loading, these soils are highly prone to fail due to shear, crushing or excessive settlement. These factors end up expansive soils as unsuitable soils for any construction. If the strength of the soil is poor, then soil stabilization is duly needed. Stabilization is …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 5, Issue 2, 2019 · pp. 48–55 Read article
-
EFFECTS OF LOW FREQUENCY ULTRASOUND TREATMENT IN MITIGATING SULFATE REDUCING BACTERIA
Abstract: Biocorrosion is associated to microorganism such as Sulfate Reducing Bacteria (SRB) presence in the environment and cause deterioration of metallic and non-metallic materials. Chemical bactericides are commonly used to mitigate SRB in the treatment process of oilfield but this method comes with disadvantages such as lower in efficiency, environment pollution, high cost and health problems. This paper shows a systematic investigation of 20 kHz frequency Ultrasound (US) performance as an …
Published in International Journal of Water Resources Engineering · Vol. 4, Issue 2, 2018 · pp. 1–6 Read article
-
Effect of Circular Polyimide Micropillars on Surface-Driven Capillary Flow of Dyed Working Liquids inside the SU-8 based Glass Microfluidic Devices
Abstract: In this experimental work, total 8 individual SU-8 based glass microfluidic devices are fabricated using Mukhopadhyay’s own hands-on completely. Maskless lithography and indirect bonding technique are the methods to fabricate these devices. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven capillary flow in each device. Dyed water and dyed ethylene glycol are the selected and prepared …
Published in International Journal of Water Resources Engineering · Vol. 6, Issue 1, 2020 · pp. 1–9 Read article
-
Effective E-Health Monitoring Using IOT (Internet of Things)
Abstract: The basic purpose of joining of the paper is to address an e-flourishing getting, transmission and watching framework. Tolerant success parameters are checked by remote sensor system and gave to the far end through Zigbee interface. Information got at far end is seen by MATLAB. On the off chance that the parameters are shocking it arranges the GSM module to send SMS on professional PDA. Framework finished in this paper …
Published in International Journal of Software Computing and Testing · Vol. 4, Issue 1, 2018 · pp. 21–29 Read article
-
An Effective use of Renewable-Energy Sources on Charging the Battery of Cell Phone
Abstract: Harnessing and utilizing renewable energy source at micro level is a tedious task, but always has great importance as world is suffering from energy crisis with fast extinction of fossil fuel and minimizing conventional electricity usage pattern. This paper considers application of renewable source at micro level concerning on charging the battery of Cell-Phone. Basically in this paper we showed how two most common renewable source Wind and Solar power …
Published in International Journal of Analog Integrated Circuits · Vol. 2, Issue 2, 2016 · pp. 10–13 Read article
-
Effect of various parameters and Equivalent Circuit Analysis on Degradation of Organic Solar Cell
Abstract: This study conducts a mathematical analysis on organic solar cells. Two modeling approaches are studied, equivalent circuit model and optical model. Equivalent circuit model study is conducted by undergoing parametric extraction study of two diode model by implementing genetic algorithm using optimization toolbox in Matlab 2014. Two studies conducted in this section, two diode model study on degradation of organic solar cell under continuous illumination. The optimization studies includes the …
Published in International Journal of Analog Integrated Circuits · Vol. 2, Issue 2, 2016 · pp. 5–9 Read article
-
An Effective Obstacle Alert Parking System based on AT89S52 Microcontroller using Ultrasonic sensor
Abstract: On grounds of safety & security, automation & protection are the areas which find their applications in almost all the fields as they make human life more comfortable, economic & less rigid. This paper is about for developing a module which assists and warn a car driver it continuously detects the obstacle so as to avoid accidental situation while reversing the vehicle. This system can be used in vehicles, handy …
Published in International Journal of Embedded Systems and Emerging Technologies · Vol. 1, Issue 2, 2016 · pp. 29–35 Read article
-
Effect of Electromagnetic Interference and Different Counter Techniques -Electromagnetic Compatibility
Abstract: Electromagnetic Interference (EMI) refers to any electromagnetic (EM) disturbance that intrudes, hinders, degrades or bounds the actual performance of a piece of electrical/electronic equipment, transmission channel, or other susceptible systems. It can occur in any part of the EM spectrum from frequencies of 0 Hz (d.c.) to 20 GHz or higher, but though utmost predominant in the radio frequency (RF) region. The electromagnetic environment is the significant part of the …
Published in International Journal of Microwave Engineering and Technology · Vol. 1, Issue 2, 2015 · pp. 7–14 Read article
-
Analyzed the Interfacing Effect on Performance of Perovskite Solar Cell Using Copper Thiocyanate (CuSCN) as Hole Transport Layer
Abstract: The interfacing layers occurs between the electron transport layer (ETL) (TiO 2 ) and Absorber layer(CH 3 NH 3 PbI 3 ) and also Absorber layer (CH 3 NH 3 PbI 3 ) and hole transport layer (HTL) play important role in the efficacy of perovskite solar cells using SCAPS Tool. Using solar cells makes sense and may even be required in the future when new clean energy sources are …
Published in International Journal of Microwave Engineering and Technology · Vol. 9, Issue 2, 2023 · pp. 49–55 Read article
-
Electric Vehicle Charging Effects on Power Grid
Abstract: Wheel is considered as one of the most important invention of mankind. After inventing the wheel, transportation system became easier. When motor vehicle was invented, a new era of transportation system has started. There are lots of inventions, modifications, changes has happened in the field of transportation sector. Now, a new era in vehicles sector has started since last few years. Most of the famous automobile companies are trying to …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 6, Issue 2, 2020 · pp. 25–38 Read article
-
Study and Simulation of Radiation Effects on MOS Structures through High Energy Ions
Abstract: MOS structures exposed to 305 MeV Kr and 710 MeV Bi ions irradiation with fluences of 109 cm 2 and 1010 cm 2 were investigated by capacitance measuring methods (C–V, C–t), completed by quasistatic low-frequency C–V and DLTS measurements. The irradiated MOS structures were functional in spite of a high density of radiation defects. The electric activity of the defects brought a sharp decrease in the generation parameters tr and …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 2, 2017 · pp. 40–46 Read article
-
Effect of MoS2 Nanosheets on ACNT-MoS2 Nanohybrids
Abstract: Here amorphous carbon nanotube – molybdenum disulfide nanohybrids were prepared using hydrothermal method. Here the amount of thiourea and hexaammonium heptamolybdate tetrahydrate were taken in two different amount such as 2.34g:1.28g and 4.68g:2.46g. The amount of amorphous carbon nanotube were kept at 0.5g of fixed amount. Finally the two as prepared nanohybrids were characterized by using field emission scanning electron microscope method.
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 2, 2019 · pp. 1–7 Read article
-
Effect of Polystyrene Nanoparticles from Recycled Waste Material on the Properties of Asphalt
Abstract: There is growing concern in many parts of the world over the increasing stress placed on the asphaltic material used to pave streets, highways, and runways due to higher traffic volumes and climatic and other environmental factors (e.g., heat, storms, ultraviolet radiation). Adding asphalt modifiers (e.g., polymers) on both the micro and macro scales has improved this material’s physical and rheological properties, but recent research, especially in the field of …
Published in International Journal of Applied Nanotechnology · Vol. 8, Issue 2, 2022 · pp. 37–50 Read article
-
Effect of Sulphamic acid on the growth of Glycine single crystals
Abstract: Sulphamic acid added glycine single crystals were grown successfully by slow-evaporation technique.A single crystal with well defined crystal was obtained. The lattice parameters and crystal system of the grown crystals were confirmed by single crystal and powder x-ray diffraction analysis.The functional groups present in the sample were identified by FTIR spectral analysis.The lower cut off wavelength and bandgap energy of the grown crystal was analysed from uv-vis spectral analysis. Keywords: …
Published in International Journal of Energetic Materials · Vol. 5, Issue 1, 2019 · pp. 9–13 Read article
-
The Effect of Carbon Percentage on Structural Steel’s Compressive and Tensile Strength: A Literature Survey
Abstract: The fundamental necessity of this survey is to check the enhancement of the strength, hardness, dimensional stability and wear resistance by passing them through the cold temperature that enhance the hardness of the substance as a result of the increment in which it took place within the proportion of primary solid solution within the structure. If the type of methods mentioned in the article are employed in manufacturing and production …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 2, 2015 Read article
-
Effect of Antimony (Sb) incorporation on physical parameters of Te15 (Se100-xSbx)85 glassy alloys
Abstract: In the present study the physical parameters of Te15 (Se100-xSbx)85 glassy alloys prepared by melt quenching technique have been reported. The parameters viz. average coordination number (<r>), average number of constraints (Ncon), number of lone pair electrons (L), mean bond energy( <E>), cohesive energy (CE), average heat of atomization (Hs), glass transition temperature (Tg), density (ρ) and energy gap (Eg) were calculated theoretically for the glassy alloys. The mean bond …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 46–55 Read article
-
Effect of Ge and Pb Impurities on the Optical Properties of Amorphous (Sb2Se3)90Sn10 Thin Films
Abstract: The as prepared samples of [(Sb2Se3)90Sn10]95 M5 [M = Ge, Pb] chalcogenide system were amorphous as evidenced by X-ray diffraction studies. The optical band gap has been estimated with the help of Taucs relation for the as-deposited [(Sb2Se3)90Sn10]95M5 thin films. It is observed that the optical band gap increase with increase in the Ge and Pb content, which may be due to decrease in the density of defect states. This …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 7–14 Read article
-
Study of Microstructure and corrosion effects of precipitation hardened high strength AA-7xxx aluminium alloy subjected to cryo rolling
Abstract: The strength and life of an alloy is the primary parameter taken into consideration while building hulls and superstructures for marine applications. Usually AA-7xxx is widely used for these applications and hence is chosen for the present investigation. Cast AA-7xxx alloy reveals distribution of soluble intermetallic compounds in the α-aluminium matrix. In order to improve the mechanical properties and condition the microstructural features, precipitation hardening (solutionizing and ageing) treatment was …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 18–23 Read article