Search
974 articles for “conductivity”
-
Genetic Algorithm approach for the Position Control of Permanent Magnetic Synchronous Machine
Abstract: Permanent Magnetic Synchronous Motors (PMSM or Brushless DC Motor) are widely being used for many industrial applications because of their high efficiency, high torque and low volume. Research has conducted using genetic algorithm to develop a complete model of the BLDC motor and to design an optimal controller for its position control. Generally PID controller is being used for control purposes in many systems because of its simple structure and …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 2, Issue 1, 2016 · pp. 30–39 Read article
-
Simulation and Analysis of Grid-connected PV System with Active Filter based on P-Q Theory
Abstract: This paper presents a comprehensive analysis of two grid-connected photovoltaic (PV) systems, one with a 100-kW capacity and the other with a 25-kW capacity, incorporating an active filter based on the Instantaneous Reactive Power Theory (P-Q theory). In comparison to passive filters, the active filter based on the P-Q theory offers several advantages. While passive filters are limited in their ability to adapt to varying grid conditions and load profiles, …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 9, Issue 2, 2023 · pp. 1–11 Read article
-
A Novel Method of Rice Disease Detection Based on Deep Learning
Abstract: India's main food crop is rice. Agriculture accounts for 70% of the Indian economy, yet pests and illnesses cause 37% of the production of rice to be lost. The early detection of rice diseases will prevent huge economic loss for the farmer and the proper care can assist farmers to protect their rice crops from various crop diseases. Manual illness diagnosis is a time-consuming and complex technique. Deep learning techniques …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 8, Issue 1, 2022 · pp. 10–17 Read article
-
On the Performance of Adaptive Intelligent Wireless Senor Nodes Nanostructured Array for IoT Applications
Abstract: Nowadays practically everyone has a mobile device, and those numbers are getting higher, parallel, the number of interactive multimedia applications is also increasing, and this trend will continue in the future. Wireless sensor node data can be used for a variety of applications, including environmental monitoring, industrial automation, and smart home systems. In other circumstances, the nodes may be able to process and analyze the data locally before communicating it …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 9, Issue 2, 2023 · pp. 29–39 Read article
-
Effect Of Capping Agents And Annealing On The Optical Properties Of (Cd0.8-Zn0.2)S And (Cd0.8-Zn0.2)S:Eu Films Prepared By CBD Technique
Abstract: Thin films of (Cd0.8-Zn0.2)S and (Cd0.8-Zn0.2)S:Eu are prepared by Chemical Bath Deposition (CBD) technique on glass substrates at 60ºC temperature by adding Mercaptoethanol and Methanol as capping agents(CA). The films were annealed at 400°C for two minutes and their optical properties were studied. The effect of the presence of capping agents and annealing was investigated. The optical constants such as refractive index, extinction coefficient, optical and electrical conductivity, real and …
Published in International Journal of Applied Nanotechnology · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
Review Article:Designing of Smart Textiles
Abstract: Nanomaterials used in Industry will be a great change in market. Material like silver nanoparticles is going to enhance properties of finished product. For textile industry, there are several nanomaterials which have their specific properties to introduce new products like yarns, fabrics, coatings with different amazing properties like antimicrobial, water repellent, antidust, antiwrinkle, etc. Nanomaterials are widely used in textile industries. They are used to design fabric with properties of …
Published in International Journal of Applied Nanotechnology · Vol. 1, Issue 1-2, 2015 Read article
-
A Review on Nano-Vibratory Beam Gyroscope and Its Concept
Abstract: This paper exhibits the displaying and investigative recreation undertaking of a nanocantilever bar whirligig. Smaller scale/nanowhirligig as a successful rate estimation sensor is of extraordinary significance in a few cutting edge types of gear including air ships, satellites and even in little cameras. A few sorts of such whirligigs are being used and different research recreations were performed throughout the most recent one decade. Contrasted with tuning fork and ring …
Published in International Journal of Applied Nanotechnology · Vol. 2, Issue 2, 2016 · pp. 1–3 Read article
-
Characterization and Photocatalytic Treatment of Oil Produced Water Using TiO2
Abstract: Photo catalytic oxidation is gaining momentum in treating waste water very effectively coupled with solar energy. The solar nano photo catalytic technique involves excitation of a semiconductor through the adsorbent of the electromagnetic radioactivity, most generally within the UV spectrum. In one methodology titanium dioxide semiconductor is excited by using photons which possess sufficient electricity to motivate electrons from valence band which known as band gap, to the conduction band. …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 1, 2017 · pp. 1–10 Read article
-
The Current Role of Nanomaterials in Paints Industry
Abstract: Nano coatings are materials that are made by getting the material at the nuclear level to outline a denser thing. Nano coatings have a couple of purposes of enthusiasm, for instance, better surface appearance, awesome engineered assurance, better warm and electrical conductivity and better disintegration insurance. Wire of nanoparticles update the disintegration insurance of zeolite coatings, epoxy coatings and antimicrobial coatings. The nanopaint development improves the structure's entire ecobalance. The …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 1, 2018 · pp. 19–33 Read article
-
The Production Advanced Carbon Nanocomposite Materials by Using the Method of Vibro-turbulization
Abstract: Nanocomposites are materials that contain nano-sized particles in a matrix of a standard material. The addition of nanoparticles to the matrix results in a sharp improvement in the properties of the resulting nanomaterial, including mechanical strength, toughness, and electrical or thermal conductivity. Existing methods for the synthesis of nanocomposites, consisting in the laser decomposition of an aerosol of a ferrocene solution in toluene, as a result of which a nanocomposite …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 2, 2020 · pp. 10–14 Read article
-
Radiative Flow of Energy Consumption with Varying Building Structures
Abstract: The current study deals with Radiative flow of energy consumption with varying building structures solved by boundary value problem. Application of heat transfer takes place in Industrial and Engineering sectors to overcome the difficulties which arise from radiations in building construction. This is shown by taking few unique shapes of buildings as examples which are ellipsoid, isohemi hexagon, isohemisphere and torus ring. The heat transfer taking places of these structural …
Published in International Journal of Applied Nanotechnology · Vol. 8, Issue 1, 2022 · pp. 30–43 Read article
-
Break Extension and Possibility of Debonding in Encapsulation-Based Self-Healing Materials
Abstract: The breakage of containers upon split proliferation is vital for accomplishing split mending in embodiment based self-recuperating materials. A mesomechanical model was produced in this review to reenact the procedure of split proliferation in a framework and the capability of debonding. The model utilized the augmented limited component technique (XFEM) consolidated with a firm zone demonstrate (CZM) in a two-dimensional (2D) setup. The arrangement comprised of a vast grid with …
Published in International Journal of Energetic Materials · Vol. 3, Issue 1, 2017 · pp. 1–4 Read article
-
Porous Carbon Materials for Electrochemical Energy Storage
Abstract: The climate change and energy demand promote the rapid development of electrochemical energy-storage devices. Due to an excellent chemical stability, high electronic conductivity and large specific surface area, porous carbon materials have always been considering as a promising candidate for electrochemical energy storage. This focus review summaries recent advances in the synthesis of various porous carbon materials electrochemical energy storage devices like lithium-ion batteries, supercapacitors, lithium-ion hybrid capacitors have been …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 13–16 Read article
-
Study of Balanced Energy Absorbing Material for Structural Applications.
Abstract: The ballistic execution of "smart-sized" S2-glass fiber fortified epoxy was assessed in correlation with network perfect, framework semi-good and lattice contradictory estimated materials. The smart size is a detailing intended to give rate-subordinate conduct. The brilliant estimated material was appeared to show rate subordinate changes in interlaminar shear quality and mode I interlaminar break sturdiness testing; the ballistic execution of the material was enhanced just marginally over perfect measured materials. …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 34–42 Read article
-
Synthesis and characterization of some organic semiconductor materials for optoelectronics
Abstract: Charge transfer complexes have high molar absorptivities and it’s an important phenomenon in the energy transfer process to increase the conductivity. Charge transfer complexes have been used in organic photovoltaic cells, organic semiconductors. Charge transfer complexes formed between electron donors and acceptors with strong interaction.In this paper, a Charge transfer complexes (CTC) of some organic semiconductor’s materials have been studied spectrophotometrically in chloroform, when the optical absorption of the CTC …
Published in International Journal of Energetic Materials · Vol. 6, Issue 1, 2020 · pp. 14–24 Read article
-
Comparative Study of Oil Palm Fibre for Effective Remediation of Crude Oil in a Contaminated Soil
Abstract: Comparative study was conducted on two different oil palm fibre effectiveness on degradation of crude oil contaminated loamy soil. The method of X-ray fluorescence spectrometer (GC) was applied for crude oil analysis as well as the different samples of oil palm fibres, which was classified as Elaeis Guineeensis and Tekena Species was analyzed to determine the possible elements present in the specimen and the result obtained identified, Mg, P, Si, …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 25–30 Read article
-
Review on Harvesting Energy from CO2 and its Importance in Afghanistan
Abstract: In all over the world, increasing of demands for energy and increasing of air pollution are important challenges these days. To overcome with these challenges, scientists are conducting several researches. As we know among the greenhouse gases CO2 has the greatest amount. There are two technologies CCS and CCUS to deal with these problems. In this article, we try to introduce one way in each technology. It means that describing …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 17–27 Read article
-
Review on Energy Resources by Hydropower Plant
Abstract: Water falling from a high potential to a low potential generates hydropower, a renewable energy source. The potential energy of falling water is used to power a hydro turbine, which generates hydro energy. The rotor of the electrical generator is linked to this turbine. The water cycle is reliant on the sunlight. Hydro energy is a type of energy that can be used to operate machinery or generate electricity by …
Published in International Journal of Energetic Materials · Vol. 7, Issue 2, 2021 · pp. 19–25 Read article
-
Investigation of the Optical-Electrical Properties of Simonkolleite and ZnO: Synergism and Nano/Microcrystals
Abstract: This study aimed to investigate the optical-electrical properties of simonkolleite (SM) and zinc oxide (ZnO), focusing on ZnO's nano/micro size and the synergistic effects between SM and ZnO. The synthesis of SM nanocrystals (NCs) was successfully achieved, and thermal annealing temperature was used to manipulate the formation of SM/ZnO nanocomposites ranging from NCs to microcrystals of ZnO. Structural and morphological properties were characterized using X-ray diffraction (XRD),Fourier transforms infrared (FT-IR), …
Published in International Journal of Energetic Materials · Vol. 8, Issue 2, 2022 · pp. 18–30 Read article
-
Exploring Aptamer Applications in Analytical Chemistry, Medicine, and Food Industry.
Abstract: Many studies have been conducted and a large number of isolated aptamers for different targets have been used since Ellington and Gold's independent description of aptamer and its in vitro selection method, known as SELEX, in 1990. With excellent binding affinity and selectivity, aptamers can bind to a variety of targets, such as haptens, small organic molecules, inorganic compounds, and even entire cells. Currently, aptamers for a large variety of …
Published in International Journal of Energetic Materials · Vol. 9, Issue 1, 2023 · pp. 21–27 Read article