Search
650 articles for “Simulation”
-
Synthesis of White Light Emitting Water-soluble CdZnS Quantum Dots at Room Temperature
Abstract: Water-soluble alloyed CdZnS quantum dots (QDs) have been successfully prepared at room temperatures by reacting a mixture of Cd(CH3COO)2 and Zn(CH3COO)2 with Na2S using thiolactic acid (TLA) as a surface capping agent. The photoluminescence (PL) spectra of the alloyed QDs are determined on the basis of the Cd2+/Zn2+ molar ratio, reaction pH, intrinsic Cd2+and Zn2+reactivities toward Na2S and the concentration of capping agent. A systematic blue shift in emission wavelength …
Published in International Journal of Energetic Materials · Vol. 7, Issue 1, 2021 · pp. 32–39 Read article
-
Re-use of Hazardous Wastes
Abstract: Utilization enables one to reach the risky stage of life. The earth's response to rising garbage has a significant influence on environmental assets. These resources are being consumed by humans and feel the illness in health. Inadequate survey of waste generated and to be shifted. A structured strategy that forces a more in-depth investigation of waste minimization and generation. This waste can be used by two series of steps: by …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 12–16 Read article
-
Enhancing Battery Management Systems: Innovations in State-of-Charge Estimation
Abstract: A Battery Management System (BMS) is crucial for managing the electronics of rechargeable batteries, ensuring their safe and efficient operation. This is particularly important for lithium-ion (Li-ion) batteries, which are preferred in electric vehicles and energy storage systems due to their high energy density, low self-discharge rates, long cycle life, and broad operating temperature ranges. The primary functions of a BMS include monitoring the state of charge (SOC), managing battery …
Published in International Journal of Energetic Materials · Vol. 9, Issue 2, 2023 · pp. 5–11 Read article
-
Evaluating Photo-Catalytic Application of TiO2 Nano Particles Augmented With H2O2 for Mineralization of Pharmaceutical Effluent
Abstract: Interest in the photocatalytic oxidation of non biodegradable organics from contaminated wastewater is growing rapidly. The photocatalytic activity of TiO2 nano particles synthesized via Sol-Gel method for the degradation of pharmaceutical effluent under UV light was discussed in this study. The TiO2 nano particles were characterized by X-Ray Diffraction (XRD) to determine size, Morphology Index, Specific Surface area and surface to volume ratio. The XRD results revealed that the TiO2 …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 31–36 Read article
-
Recycling Multilayer Materials: Discovering Mechanical Parameters for Engineering Applications
Abstract: Multilayer materials have been widely used in various applications such as packaging, electronics, and construction industries. However, the disposal of these materials is becoming a significant environmental concern due to their non-biodegradable nature. Therefore, the recycling of multilayer materials has become an essential aspect of sustainable waste management. The mechanical characteristics of materials recycled from multilayer products were examined in this study. The focus was on determining the impact of …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 43–47 Read article
-
MRF Computation to Identify Errors in Quantum Structures
Abstract: As the present trend move towards the construction of circuits using Nano scale devices, the probability rate of occurrence of errors in these devices are high. Therefore, detailed study is required to identify the possibility of errors in this nanoarchitectures. In this paper we propose two elegant methods namely Probabilistic based design methodology [1] and Markov random field approach [1] to identify the occurrence of errors. Any arbitrary logic circuits …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 2, 2016 · pp. 28–37 Read article
-
Effect of nano Aluminum on Thermal Behavior and Ignition Characteristics of Al/KClO4 Thermite Composition
Abstract: Ignition experiments of micron size Al/KClO4 (ALCLO) thermite composition was carried out at high heating rate (40°C/min.) using DTA (differential thermal analysis), and it was observed that no ignition took place up to 700°C. Similarly in case of STA (simultaneous thermal analyzer) experiments, no ignition peaks were found up to 1100°C at 20/min. ALCLO when ignited in a bomb calorimeter for heat of combustion output measurement it produced a large …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 9–19 Read article
-
Graph Theory and Matrix Method for Development and Design of Combustion Engine
Abstract: The idea upon which any methodology development is pillared leads to real time decisions if simulation and assessment is as per the standard codes set by standard organizations. More near is the system with standard system more it is appropriate for operation. In the present work system under consideration is internal combustion engine. Fuel cost is one of the most important parameter in life cycle analysis of the internal combustion …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 16–25 Read article
-
A Review on Green Inhibitors to Corrosion of Steel
Abstract: Traditions of green corrosion inhibitors are described to elucidate soybean oil derivatives, Spondias cytherea leaves, Rosmarinus officinalis L. leaves, Chrysophyllum albidum; Tridax procumbens L. leaves, roasted coffee, Jatropha curcas leaves, Propolis, Manilkara zapota fruit peel, avocado, Canna indica flower. Green inhibitors are ever praised due to environmentally friendly usage. Industrial feasibility is studied from laboratory simulations. Carbonated drink corrosion of steel is most acceptable to use green inhibitors. Corrosion in …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 12–21 Read article
-
Advancements in Manufacturing Techniques for High-performance Fiber-reinforced Composite Materials
Abstract: This article explores the recent advancements in manufacturing techniques for high-performance fiber-reinforced composite materials. Composite materials have gained significant attention in various industries due to their exceptional mechanical properties, lightweight nature, and design flexibility. The continuous development of manufacturing methods has enabled the production of composites with improved performance, increased productivity, and reduced costs. This article reviews key manufacturing processes, such as automated fiber placement, resin transfer molding, and additive …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 35–42 Read article
-
Finite Element Analysis of Composite Tube
Abstract: Abstract – In many industries, composite tubes are preferable than other materials, like, aluminum, steel, wood, iron. The durability, strength, stiffness, weather and corrosion resistance of the tubes are required properties in industries. It is fabricated in several layers depending on their functions. In this study, composite tube is modeled using ANSYS software by changing material properties and layer orientation. ANSYS can predict results before fabricating composite sample. The meshed …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 48–59 Read article
-
A Model for Plastic-Hydrolytic Damage Bioresorbable Polymer Composites
Abstract: This paper explains and assesses a recently developed constitutive model for elastic-damage that may sustain plastic-hydrolytic damage. When a metallic material is subjected to plastic strain, voids and microcracks in the metal matrix start to form, develop, and merge. This is what causes ductilitydegradation in metals. Only a few of the many models that have been presented to depict ductile failure have done a thorough analysis of the entire damage …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 23–27 Read article
-
Enhancement of Power Factor and Effective Performance of an Induction Motor Based Converter-Fed Rotor
Abstract: Abstract— Taking a novel concept of a rotor that is fed by a converter, this paper attempts to investigate an induction machine. In this the stator has been directly connected to the grid and it is also Y connected while the rotor windings are open-ended fed to a back-to-back converter with a floating capacitor. The factors that are carefully studied are the power factor and the efficiency improvements of the …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 1, 2018 · pp. 10–19 Read article
-
Synthesis of Biodegradable Nano Composite of PMMA vinyl Polymer with Corn Cob
Abstract: Vinyl polymers are the largest category of polymers which have wide applications. PMMA is important vinyl polymer which when modified with with Corn Cob(agricultural waste) for nanocomposite formation, then it may result biodegradable modified polymer. Corn cobs (focal piece of maize) are either treated as waste or consumed as fuel causing ecological concern. So as to accomplish its worth option in new research regions, corn cob can be prepared synthetically …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 20–24 Read article
-
Study of Heavy Metal ion adsorption from Synthetic Wastewater with the help of biomass and analysis of Mathematical Model
Abstract: The biofilm matrix is a mixture of secreted polymers, metabolites and nutrients ingested, lysis solution products, and even particle debris. This matrix, which is polyanionic by nature, is essential for the activated carbon of metal cations. In this study, the heavy metal adsorption mechanism in biofilms is modelled in one spatial dimension. The numerical method is a free-boundary value issue for nonlinear parabolic and quadratic partial differential equations. Parabolic equations …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 45–56 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
The Curvature Effect consideration in Euler beam theory
Abstract: The purpose of this paper is to improve the results of Euler beam theory. Euler beam theory can be used to determine the deflection of beam. But in some cases cross section of beam is not flat-ended, and Euler beam theory only consider the vertical loading, so the effect of curvature is occurred due to normal loading. The method to determine the curvature effect has been developed in this paper, …
Published in International Journal of Mechanics and Design · Vol. 3, Issue 1, 2017 · pp. 21–27 Read article
-
Fatigue life Analysis of High Pressurized Gear Pump Component—A Review
Abstract: This review deals with fatigue life analysis of high pressurized gear pump component. The gear pump components failure occurs at the root of the driven gear and uneven wear at driven side of thrust plate. To avoid the failure, pump should pass the endurance test condition without fail, the test condition should not drop volumetric efficiency more than ten percentile, should pass high cycle fatigue life. The system is to …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 2, 2020 · pp. 23–33 Read article
-
Design And Optimization of Wheel Assembly of F1 Car
Abstract: The Wheel Assembly is the portion of a Formula Student Car or any car that connects the main structure of the body to the wheels using suspension arms. It's a part of the Final Drive as well. The steering system's wheel hub assembly is an important component. It keeps your wheel fixed to the car while also allowing it to turn freely. The wheel hub assembly is responsible for housing …
Published in International Journal of Mechanics and Design · Vol. 7, Issue 2, 2021 · pp. 45–47 Read article
-
Robotic Path: Analysis of Algebraic Topological Properties of Stream Lines Due to Source-Sink, Dipole and Vortex
Abstract: The importance of robotic path planning cannot be overstated. Robotic path planning plays a crucial role in ensuring efficient and safe navigation for robots. It enables robots two autonomously determine the most optimal path to reach their destination while avoiding of obstacles and potential collisions. By carefully analyzing the environment and considering various factors such as distance, speed, and obstacles, robotic path planning enhances the overall performance and productivity of …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 2, 2023 · pp. 1–8 Read article