Search
75 articles for “Reaction Mechanisms”
-
Chemical Processes in Leather Tanning: Bridging Conventional Methods with Bio-Leather Technologies
Abstract: The leather industry, known for its extensive use of chemical processes, is undergoing a significant transformation with the introduction of sustainable practices and bio-derived materials. This study explores advancements in the chemical synthesis and reactions involved in leather production, focusing on both traditional and innovative approaches. Traditional tanning processes, which often involve chromium and other chemicals, are contrasted with emerging bio-leather technologies that utilize renewable resources to minimize environmental impact. …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 10, Issue 2, 2025 · pp. 36–41 Read article
-
Functional Rubber Particles and Their Applications- A Review
Abstract: Functional rubber powders (FRPs) are emerging as a potential class of materials derived primarily from end-of-life tires (ELTs) and other rubber scraps through mechanical, cryogenic, or de-vulcanization methods. These powders act as high-performance additives or reinforcing fillers in various engineering applications due to their low cost, improved surface properties, customizable particle sizes, and ability to undergo further chemical reactions. This review provides an overview of the production technologies, focusing on …
Published in International Journal of Chemical Separation Technology · Vol. 11, Issue 2, 2025 · pp. 8–16 Read article
-
Design and Simulation of Improved Particle Swarm Optimization Based Capacitor Placement in Distributed Generation System
Abstract: A major investigation was carried out to arrange the optimal condenser arrangement for the powerfactor adaptation, improvement of the voltage profile and the decrease of losses within theappropriation frameworks. In particular, a mechanical plant has large inductive loads withunpredictable load conditions and an incredibly low power factor. In most situations, the key reasonwhy a customer sends a condenser bank is to keep the power bank free from punishment. Power factoris …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 7, Issue 1, 2021 · pp. 1–10 Read article
-
Biocatalytic Synergy: Organic Chemistry Strategies for Sustainable Biochemical Transformation
Abstract: In the pursuit of greener and more sustainable chemical processes, biocatalysis has emerged as a pivotal field bridging organic chemistry with biochemical innovation. This paper explores how principles from organic chemistry are being integrated into biocatalytic systems to enable environmentally friendly biochemical transformations. Emphasis is placed on enzyme engineering, co-factor recycling, green solvent usage, and hybrid chemo-enzymatic methodologies that enhance selectivity, reduce toxicity, and minimize environmental impact. Recent advancements—including machine …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 11, Issue 2, 2025 · pp. 38–41 Read article
-
Review on Corrosion and Rust Inhibition of Machines in Chemical Engineering Field
Abstract: The present review involved information about corrosion and rust of machines like causes of corrosion , mechanism of corrosion ,types of corrosion , treatments. Corrosion is a natural event which includes the deterioration of element components. According to the destruction of a metal or its properties due to a reaction with its environment, which causes potentially severe damage to building , application and surface .Inhibiting corrosion to Prevent Machine Failures …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 5, Issue 1, 2019 · pp. 1–9 Read article
-
Effect of Al2O3 and CeO2 Nanocatalysts on Biodiesel Yield from Pine and Soapnut Oils
Abstract: Abstract This study examines the influence of aluminium oxide (Al2O3) and cerium oxide (CeO2) nanocatalysts on the biodiesel yield obtained from two non-edible oils: pine oil and soapnut oil. Both oils were extracted through mechanical pressing and converted into biodiesel using the transesterification process. To understand how different process conditions, affect biodiesel production, a Box–Behnken Design (BBD) was used. Three key variables—methanol-to-oil ratio, catalyst concentration, and reaction temperature—were analyzed to …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Mechanisms for Biological Energy Transduction
Abstract: One of the most intriguing aspects of plant metabolism is energy transduction, and a significant amount of study has gone into understanding the process by which the different activities operate. When light energy is employed in the chloroplast to create Adenosine triphosphate (ATP) from Adenosine diphosphate (ADP), transduction is taking place. This is the process of converting one form of energy into another. The reactions involved in this research are …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 18–22 Read article
-
Chemistry of Mehandi (Henna): Natural Dyeing Mechanism, Composition, and Applications
Abstract: Mehandi (Henna), derived from the plant Lawsonia inermis, is one of the oldest natural dyes used for body art, hair coloring, and traditional medicinal applications. Beyond its cultural significance, henna represents an interesting example of applied organic chemistry, where naturally occurring molecules interact with biological tissues to produce long-lasting coloration. The primary coloring constituent of henna is Lawsone (2-hydroxy-1,4-naphthoquinone), a naphthoquinone compound responsible for the characteristic reddish-brown stain. When henna …
Published in International Journal of Analytical and Applied Chemistry · Vol. 12, Issue 2, 2026 · pp. 39–45 Read article
-
Effect of Castor Oil Based Multi-Functional Additive on the Properties of Natural Rubber Vulcanizate
Abstract: The effect of castor oil based multifunctional additives on the properties of natural rubber vulcanizate was studied. The castor oil was extracted from castor seed via mechanical expression and characterized. The castor oil based Multifunctional Additive (MFA) was synthesized by reacting castor oil with Diethylamine at temperature of 80oC under constant stirring for one hour and further cooled in a water bath to terminate the reaction. The formulation of the …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 1, 2023 · pp. 5–13 Read article
-
Mechanical Studies and Thermal Kinetics of Isoniazid Crystals
Abstract: Single crystals of isoniazid were crystallized by slow solvent evaporation method. The crystal structure was confirmed using single crystal X-ray diffraction analysis. Micro hardness was estimated and work hardening coefficient and Newtonian resistance pressure of the crystal were determined. Kinetic analysis of the thermogravimetric data was carried out by using Coats-Redfern relation. Activation energy, frequency factor and order of reaction were also calculated. Arrhenius equation for isoniazid is k=0.43×105e–79103/RT mol–1s–1. …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 1, Issue 1, 2015 Read article
-
Elucidation of Synthetic Mechanism Involved in the Conversion of Zwitterionic Clonixin to Carboxamide Side-Product
Abstract: N-(3-Chloro-2-methylphenyl)-2-oxo-1,2-dihydropyridine-3-carboxamide is obtained as a by-product during the synthesis and crystallization of Clonixin (2-(3-chloro-2-methylanilino)nicotinic acid) and its polymorphs, respectively. This conversion was unexpected and it changed the usual investigation path way enabling the formation of neutral and zwitterionic polymorphs in our study on Clonixin in contrary to studies of 2-(p-tolylamino) nicotinic acid investigation. The same conversion is checked in the other synthesized analogs such as 2-(phenylamino)nicotinic acid (PNA), 2-(methyl(phenyl)amino)nicotinic acid …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 2, Issue 1, 2016 Read article
-
Catalytic Applications of Carbon Nanodots
Abstract: Carbon nanodots (CNDs) owing to their hydrophilicity and multifunctionality and with ultrasmall size exhibit metal-like properties resulting in astounding catalytic performance. These nanostructures, typically less than 10 nm in diameter, possess unique physicochemical and electronic characteristics including tunable photoluminescence, high surface-to-volume ratio, abundant surface functional groups, and excellent electron transfer capabilities. Such properties have driven extensive global research into their application in heterogeneous and homogeneous catalysis. Recent advances in synthesis …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 9–14 Read article
-
A Review on Polybutadiene Rubber Composites
Abstract: Rubber composites are crucial materials that obtained by the combination of two or more components i.e. rubber and filler, comprising with different fundamental properties. The composites are lighter yet stronger materials in nature with intermediate characteristics of both the initial ingredients. Polybutadiene rubber (PBR) is one of the highly produced global synthetic rubber having significant industrial applications. PBR composites showed improved physical, mechanical and thermal properties, with greater strength, resistance …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 1–19 Read article
-
Nanocoating and Electrospraying Techniques Used for Corrosion Mitigation of Aluminum in Nitrogen dioxide Environment
Abstract: Nitrogen gas absorbs moist air to produce nitric acid. It develops acidic medium for aluminum. It forms a corrosion cell on the surface of aluminum. The formation of corrosion cell is written as: Al|Al+3||H+|H2 thus Corrosion reactions accelerate on aluminum surface and Al is oxidized into Al+3 and the H+ ions is reduced into H2. This acid produces various forms of corrosion in aluminum like galvanic, pitting, stress, crevice, blistering, …
Published in International Journal of Environmental Chemistry · Vol. 6, Issue 2, 2020 · pp. 20–31 Read article
-
Electrical Power Generation from Foot Step using 555 Timer IC
Abstract: Electricity has now become a basic requirement for all humans. Electricity is used in almost every situation. Without electricity, we would perish. Electricity is employed in everyday life, industries, and transportation, among other things. So, by merely walking on the footstep, we are creating electrical power using renewable energy. Because non-renewable energy is scarce, renewable energy is in high demand these days. This paper discusses the process of generating mechanical …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 7, Issue 2, 2021 · pp. 20–26 Read article
-
Sustainable Cementitious Composites withEpoxy–Alccofine Synergy
Abstract: This research examines the combined influence of epoxy resin and Alccofine when used as partial substitutes for cement in producing sustainable, high-performance concrete. The study aims to improve both strength and durability properties while simultaneously reducing cement usage and its environmental impact. Concrete mixes were prepared with epoxy resin contents of 0%, 5%, and 10% by weight of cement, along with Alccofine replacement levels of 5%, 10%, and 15%. The …
Published in International Journal of Concrete Technology · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Structural Analysis of Trolley Body
Abstract: The importance of structural analysis for trolley bodies or other machine bodies is that it serves as afoundation for structural design and determines if a certain structural designwill be able to handleexternal and internal loads and pressures. Generally, the trolleys are used in wide range for manypurposes which carries out the work of carrying loads from one place to another. Analysis for trolleybody is mostly demanded because of the high …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 2, 2021 · pp. 35–46 Read article
-
Study of Corrosion of Ferrous and Non-Ferrous Metals in Aqueous Medium
Abstract: Metals, like ferrous and non-ferrous, interact on their interface to develop corrosion cells. The aqueous medium produces a hostile environment due to the availability of dissolved oxygen, acids, bases, salts, bio-waste, and effluents. The solubility of acidic gases oxide of carbon, oxide of nitrogen, and oxide of sculpture create an acidic medium for metal. These unfriendly environments accelerate corrosion reactions and metals exhibit uniform, galvanic, pitting, crevice, stress, and lynching …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 44–50 Read article
-
Review on the Synthesis, Reactions, Biological Importance and Application of Phthalic Anhydride
Abstract: Phthalic anhydride (also known as IUPAC name: benzofurandione), abbreviated PA, represents a cyclic organic substance derived through the oxidative transformation of xylene or naphthalene compounds. The coexistence of the benzene and furan-1, 3-dione ring structures significantly contributes to the formation of numerous heterocycles and certain polycyclic molecules. In organic chemistry, the aromatic system within para-amino benzoic acid acts as a reactive site towards double bond-containing molecules like those featuring an …
Published in International Journal of Energetic Materials · Vol. 11, Issue 2, 2025 · pp. 12–20 Read article
-
High Strength Concrete (M40) Using Micro Silica and Steel Fiber
Abstract: Abstract: This experimental study examines the combined effects of micro silica (silica fume, SF) as a partial cement replacement and hooked-end steel fibers on the mechanical properties of M40 grade concrete. Concrete mixes were designed as per IS:10262 with a target characteristic compressive strength of 40 MPa. Silica fume was incorporated at 0%, 5%, 10%, and 12% by weight of cement, while steel fibers (aspect ratio ~50) were added at …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 53–57 Read article