Search
151 articles for “Polymer composites”
-
Influence of Surface Treatments on the Adhesion of Plant Fibers to Epoxy Resin
Abstract: Because of their primary benefits, moderate strength and stiffness, low cost, and the fact that they are a renewable, biodegradable, and environmentally safe material, natural fibers are seen to have potential use as reinforcing agents in polymer composite materials. Since they are inherently hydrophilic, moisture can easily build up on them, weakening or plasticizing the fibers’ adhesion to the surrounding matrix and affecting the performance of composite materials used in …
Published in International Journal of Agrochemistry · Vol. 11, Issue 1, 2025 · pp. 12–24 Read article
-
Study of Composite Material
Abstract: Polymeric composition compound with a plasticizer or very low proportion of pigment or processing aids are nonordinary consider as a composition the goal is to improve strength stiffness or toughness or dimensional stability by embedding particles in matrix or binding phase.
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 43–53 Read article
-
Effects of Coupling Agent and Nanoclay on the Mechanical, Morphological and Dimensional Stability of Natural Fiber/Polypropylene Composites
Abstract: Polymer nanocomposite is made up of polymer as a matrix ingredient and reinforcement ingredient as a filler in the form of nanometer particles. These ingredients have dissimilar physical and chemical features and are mixed to generate sole features of nanocomposites. Polypropylene (PP) was nominated as the polymer matrix ingredient. Reinforcement ingredients used include organically modified montmorillonite with natural fiber. Various composites based on polypropylene, natural fiber, and organically modified montmorillonite …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 9–18 Read article
-
Mesh to Shrink in Nano Fabricated Compose
Abstract: This article is study about shrink of polymer originated composes. Aim has been inclusive from nano- based fillers on hybridized consequence from polymeric effects. Otherwise, descriptive issues have ever arose to link accession to repair dental simulated perversions. Nanotechnology in material formulation has been production of functional structures in range of 0.1 to 100 nm. Advantages of these composites have inherent shrinkage of cure mode in accordance to monomers said …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 2, 2021 · pp. 1–12 Read article
-
Virgin-Recycled Thermoplastic Matrix Systems as Engineered Composite Materials: A Compositional Framework for Mechanical Property Retention in Secondary Polymer Supply Chains
Abstract: Virgin-to-recycled thermoplastic resin blends, while conventionally treated as simple two- component mixtures in secondary polymer supply chains, exhibit compositional and morphological characteristics that are more accurately described using the framework of engineered composite matrix systems. This paper presents a compositional framework for understanding and predicting mechanical property retention in virgin-recycled polypropylene (PP) and high-density polyethylene (HDPE) matrix systems, developed through more than twenty years of commercial secondary polymer distribution practice …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 Read article
-
Review of Composites formed of Thermoplastic as Organic Fibers
Abstract: Composites made of structural monomers gave rise to thermoplastic polymers (TMCs). Due to their usage of a thermoplastic matrix, these materials really aren't chemically reactive. TMCs may be remoulded without degrading when heated and become softer. They harden into the final shape when they cool. Thermoplastic materials bonded with plant fibers may one day be used to create impact- absorbing structure for renewable power. Its impact features of organic fiber-reinforced …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 28–33 Read article
-
Composites: The Future Generation of Aircraft Materials
Abstract: New developments in material science and its technologies find their best fulfilling areas in aircraft and space vehicles. The aviation and space industry has often been a catalyst for the development and innovation of a new material framework in its construction. The basic parameters for aerospace development are weight reduction, system-specific requirements, and low cost. Materials have an impact on the entire life cycle of an airplane, from the design …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 2, 2021 · pp. 1–10 Read article
-
Essential of bearing in materials engineering
Abstract: Essentials of bearing have been to maintain lubricant film to prevent metal to metal contact and hence local welding of two surfaces. Tribological and mechanical properties have improved by powder metallurgy route of bearing fabrications. Alloyed non-ferrous plane bearings have better friction coefficients than pure metals. Betterment has appeared in babbit/ bronze particulate reinforced composites. Ni addition has improved performances of graphite-lead free tin bronze composite layers on surface of …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 1–17 Read article
-
Potential of Natural Fibres for Strengthening Existing Structures – A Review
Abstract: To rehabilitate the deficiencies in the existing structures, synthetic/artificial fiber reinforced polymer composites have been considered as an effective external strengthening material for construction industries since a long period, due to their outstanding performances like high strength-to-weight ratio, lightness, and resistance to corrosion. But few of their drawbacks in terms of high cost, environmental issues etc., they have been triggered the introduction and development of natural fibers. Natural fibres are …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 2, 2018 · pp. 38–46 Read article
-
Design and Performance Testing of Brown Grass Flower Broom Reinforced Composites
Abstract: Engineering materials are classified into many varies and composites are those which are finding their role in all modern day engineering applications. Composite materials are materials made of two basic components, polymer resins and fibers. It combines the physical properties and high mechanical properties of the fiber, as well as the appearance, adhesion and performance of the polymer. Here, we prefer brown grass flower brooms as our main fiber to …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 2, 2020 · pp. 34–37 Read article
-
THE STUDY OF DIELECTRIC PERMITTIVITY OF NINPs-PDMS
Abstract: Nickel–polydimethylsiloxane (Ni–PDMS) nanocomposites were fabricated to investigate the influence of metallic nanoparticle loading on the dielectric behavior of flexible polymer matrices. Nickel nanoparticles with controlled size distributions were dispersed in PDMS using solution blending and curing protocols optimized to minimize agglomeration. The dielectric permittivity and loss tangent of the resulting nanocomposites were measured across a broad frequency range (typically 10²–10⁶ Hz) and at varying filler volume fractions. Results show a …
Published in International Journal of Electrical Power System and Technology · Vol. 11, Issue 2, 2025 · pp. 39–50 Read article
-
Plant-drive Waste Fiber Reinforced Thermoplastic Composites: Modification of Fiber Surface Treatment
Abstract: Plant fibers are being utilized more frequently to create polymer composite parts for the aerospace, construction, and automotive industries. The increased awareness of the toxicity of synthetic fibers is what has caused a rise in the use of plant fibers across a variety of industries. It is crucial to emphasize that "Earth needs humans, not humans need earth," hence decision-makers and researchers are working to replace conventional materials with eco-friendly …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 14–23 Read article
-
Synthesis of Silica Nanoparticles using Sodium Silicate Solution by Sol Gel Method
Abstract: The most commonly used route for synthesizing silica nanoparticles is sol-gel method due to its ability to produce monodispersed with narrow-size distribution nanoparticles at mild conditions. Recent advances in the sol-gel process for synthesis of monodispersed, narrow-size distribution nanoparticles have boosted the development of silica-polymer nanocomposites significantly. The focus of this research is on the synthesis of silica nanoparticles, size-dependent property characterization, and surface modification for the creation of homogenous …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 1, 2021 · pp. 28–31 Read article
-
An Investigation of Physico-mechanical Characterizations of Recycled Cellulose Fiber and Glass Fiber-polypropylene Hybrid Composite
Abstract: In the field of marine engineering design, polymeric composites reinforced with natural fibers are extensively used. The results of this study demonstrate that these properties can be enhanced by adding glass fiber (GF) to recycled cellulose fiber (rCF) plastic composites. The performance of rCF and rCF/GF hybrid polypropylene (PP) composites is being studied in the current experimental effort. On the tensile behavior and impact strength of composites containing 30 wt% …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 1–10 Read article
-
The new method of composite materials production
Abstract: The existing methods for production, for example, polymer composite materials: the pressing (direct, injection, profile), the injection molding (injection, intrusion, centrifugal molding, and autoclaving), the extrusion, the pultrusion, the contact molding, the winding, vacuum molding and pneumatic molding do not permit to reach the main goal of the production of unique composite materials with a basis (matrix) filled by uniformly distributed filler (armoured element), having high strength and rigidity. The …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 2, 2019 · pp. 18–22 Read article
-
Kinetic Modifications in Polymers under Cryogenic Stress: A Thermochemical Study
Abstract: This study explores the kinetic modifications in polymers subjected to cryogenic stress, focusing on the thermochemical behavior and structural changes that occur at low temperatures. Polymers, when exposed to cryogenic conditions, exhibit distinct molecular rearrangements, influencing their mechanical properties and thermal stability. The investigation involves characterizing these polymers using advanced spectroscopic and thermal analysis techniques to identify alterations in crystallinity, molecular weight distribution, and glass transition temperature. By examining the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 10, Issue 2, 2024 Read article
-
Mechanical characterization of Fiber glass Composites with Nano silica
Abstract: Epoxy-based fiber glass composites with enhanced strength by silica Nano particles checked for mechanical strength by addition of nanoparticles. Fiber glass Composites were prepared with glass fiber and nanoparticles containing resin, by infusion method. proper mixing of nanoparticles in resin was checked by various techniques. Viscosity of liquid resin reduced because of nanoparticles but still have good command to reinforce glass fibers. glass transition temperature (Tg) of polymer containing silica …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 49–58 Read article
-
Mercerization and Mechanical Properties of Natural Fibre Reinforced Composite: A Comprehensive Review
Abstract: Growing public concern about environmental issues has prompted the production of renewable, economical, and ecologically friendly materials. Thus a shift from synthetic fiber reinforced composites to natural fiber reinforced composites can be seen. Since Fibre reinforcement is deciding factors in the Structural properties of any engineered composite. But poor interfacial adhesion of fibre matrix obstruct it's potential while using in structural applications. Different studies suggested that the surface modification techniques …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 1–8 Read article
-
Methods for Obtaining Ozone-Resistant Rubber Based on Elastomers
Abstract: Technical Rubber products are one of the main products with the widest range of uses today. To expand the scope of RTM use, it is necessary to increase its varieties. The most demanded rubber products are rubber products with high mechanical strength in contact with ozone. In this work, several polymer mixtures were used to obtain ozone-resistant rubber products. For this purpose, ethylene propylene terpolymer, polyvinyl chloride, and butadiene-nitrile rubber …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Applications of Composite Materials in Aerospace Industry
Abstract: Composites are becoming increasingly important in the aerospace industry. At least 30–40 per cent of modern airframes are now made of composites, and this percentage is increasing rapidly due to technological advances in the field. Fibre-reinforced polymer composite materials are fast gaining ground as preferred materials for construction of aircrafts and space crafts. This paper gives a review of some of these developments with a discussion of the problems with …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 5–10 Read article