Search
539 articles for “Loads”
-
Broadbanding of Circular Patch Antenna Using Stub Loaded Stacked Configuration
Abstract: This paper proposes a stub loaded stacked configuration of a circular patch antenna using FR-4 material as a substrate with dielectric constant of 4.2 for resonant frequency of 2 GHz. This configuration is a hybrid of two broadbanding technique, the stub loading technique and stacking technique. The radius of the patch is calculated to be 18.88 mm and the air gap is 1 mm between the lower and upper layer. …
Published in International Journal of Microwave Engineering and Technology · Vol. 2, Issue 1, 2016 · pp. 20–25 Read article
-
Load Frequency Control of Interconnected Power System by Conventional and Facts Devices
Abstract: The stability of power systems has been and continues to be of major concern in system operation. Modern electrical power systems have grown to a large complexity due to increasing interconnections, installation of large generating units, and extra-high voltage tie lines, etc. Transient stability is the ability of the power system to maintain synchronism when subjected to a severe transient disturbance, such as a fault on transmission facilities, sudden loss …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 2, 2018 · pp. 9–15 Read article
-
Strain Based Approach to the Fatigue Evolution Modeling of Concrete under Tension-Tension Loading
Abstract: Abstract: Strain based Approach to the Fatigue Evolution Modeling of Concrete under Uniaxial Tension-Tension Loading plays a very important role in the evaluation of the material properties of concrete utilizing strain analysis methods, the nonlinear fatigue strain evolution model is proposed, and the hypothesis of recycle ratio related fatigue strain amplitude causes stiffness degradation and inelastic deformation is briefly described which are the essential material properties of concrete. This paper …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 36–56 Read article
-
Analysis Of Non-Uniform Damped Rayleigh Beam Resting on Pasternak Foundation Subjected to Distributed Load With Variable Axial Force
Abstract: In this paper, damped non-uniform Rayleigh beam resting on Pasternak foundation and subjected to distributed load with variable axial force has been investigated. The solution techniques to the governing equation describing the dynamical system are based on Galerkin’s method, Laplace integral transformation in conjunction with convolution theorem. Galerkin’s method is explored to reduce the fourth order non-homogeneous partial differential equation to a second order ordinary differential equation. The resulting equation …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 6–16 Read article
-
IMPACT OF CLASSICAL BOUNDARY CONDITIONS ON BERNOULLI-EULER BEAM RESTING ON PASTERNAK FOUNDATION SUBJECTED TO CONCENTRATED MOVING LOAD WITH A DAMPING TERM
Abstract: Abstract The consequences of a uniform Bernoulli-Euler beam resting on a Pasternak foundation under the action of a focussed moving load with a damping term were investigated in this paper using the merely support, clamped-clamped, and clamped-free classical boundary conditions. The Laplace transform method, the extended finite integral transform, and Struble's asymptotic methodology were used to solve the governing equation after the Dirac delta function was expressed as a Fourier …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 11, Issue 2, 2025 · pp. 47–69 Read article
-
Analysis of Non-Uniform Damped Rayleigh BeamResting on Pasternak Foundation Subjected toDistributed Load with Variable Axial Force
Abstract: In this paper, damped non-uniform Rayleigh beam resting on Pasternak foundation and subjected to distributed load with variable axial force has been investigated. The solution techniques to the governing equation describing the dynamical system are based on Galerkin’s method, Laplace integral transformation in conjunction with convolution theorem. Galerkin’s method is explored to reduce the fourth order non-homogeneous partial differential equation to a second order ordinary differential equation. The resulting equation …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 26–35 Read article
-
Cross Sectional Area of Column
Abstract: Abstract In structural engineering, columns play a critical role in transferring loads from beams to thefoundation. The load applied on a beam is transmitted to the column, resulting in an upward reactiveforce. This upward pressure necessitates the determination of the column’s cross-sectional area basedon direct stress analysis to ensure that the structure can safely bear the imposed loads. Additionally,an end moment develops at the joint between the beam and the …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 1, 2025 · pp. 14–20 Read article
-
A Study to analyze compliance to timing of thrombolytic loading dose among patient with acute myocardial infarction and its impact on patient outcomes
Abstract: Thrombolytic medications work by breaking down large blood clots, allowing blood to flow back to the heart and reducing the risk of heart muscle damage. These agents can help prevent a heart attack from progressing to a myocardial infarction, which can be life-threatening. Fibrinolytic drugs are the preferred treatment for STEMI, as they promote reperfusion and restore blood flow when given within 12 hours of symptom onset. A 12- hour …
Published in International Journal of Nursing Critical Care · Vol. 10, Issue 2, 2024 · pp. 1–11 Read article
-
Comparative In Vitro Characterization of Curcumin Loaded Emulgel Formulations
Abstract: This study focused into the development of a curcumin-loaded emulgel. Different concentrations of Carbopol were used to formulate these emulgel. The in vitro evaluation of these formulations was carried out, focusing on parameters such as viscosity, rheology, pH, microbiological assay, and swelling index. The findings shed light on the promising potential of curcumin-loaded emulgels as a delivery system for herbal therapeutic carriers. The results contribute to the advancement of innovative …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 9, Issue 1, 2023 · pp. 43–51 Read article
-
ANALYSIS AND DESIGN OF RECTANGULAR AND L-SHAPED COLUMNS SUBJECTED TO AXIAL LOAD AND BIAXIAL BENDING
Abstract: Next to rectangular and circular columns, L-shaped columns may be the most frequently encountered reinforced concrete columns, since they can be used as a corner column in framed structures. The behaviour of irregular shaped reinforced concrete columns has been a constant concern for a structural engineer, to design a safe and economic structure in modern buildings and bridge piers. L-shaped reinforced concrete column subjected to biaxial bending and axial compression …
Published in International Journal of Structural Engineering and Analysis · Vol. 2, Issue 1, 2016 · pp. 15–22 Read article
-
Structural Behavior of Railway Bridges Against Wheel Loading by Finite Element Analysis
Abstract: Three dimensional numerical investigations carried out on railway bridges using ABAQUS/Explicit finite element program. The length of bridge 30 m and single track was considered in the present study. The bridge members such as main girder, cross girders and truss members are designed according to Indian Railway Standard (IRS) and the geometry of the rail was also modeled according to the standard. The constitutive and fracture behavior of materials have …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 1, 2017 · pp. 1–14 Read article
-
Experimental Investigation on Axially Loaded AASC and TVC Square Columns
Abstract: In this present project, an experimental investigation was carried out to study the behaviour of alkali-activated slag concrete (AASC) and traditionally vibrated concrete (TVC) columns under axial loading. The dimensions of the columns were 150 mm × 150 mm × 1219 mm to mimic the short column behaviour. The longitudinal steel ratio was varied for the specimens. Different criteria such as load deformation behaviour, compression stiffness and surface strain were …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 1, 2019 · pp. 8–17 Read article
-
Cyclic Loading Over “Stress Behaviour of High Strength Fibre (Steel and Glass) Reinforced Concrete
Abstract: Construction spectrum is growing as it has never been before; there is always something under new construction. It is thus very much important to use updated materials in construction to improve usability, workability and durability, along with the increase in characteristic strengths of material with respect to high rise structures specially. Concrete is one such material obtained from mixing of various materials. Concrete is good at compressive strength but shows …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 1, 2017 · pp. 17–31 Read article
-
Convolutional Neural Network Algorithm for Stress Field Approximation for a Uniaxially Loaded Plate with Holes
Abstract: ABSTRACTKnowing the high stress concentration and its location around a hole is of practical importance in designing engineering structures, effective parameters can be selected in order to achieve minimum stress concentration around the hole(s). The visualisation of the stress distribution is done experimentally or numerically using finite element analysis (FEA). This study involved the approximation of the von Mises stress field distribution around regular holes in finite metallic plates, based …
Published in International Journal of Image Processing and Pattern Recognition · Vol. 6, Issue 2, 2020 · pp. 1–12 Read article
-
Optimization of Dynamic Load Carrying Capacity of Tapered Roller Bearing Using Advanced Optimization Technique
Abstract: In the design of tapered roller bearings, long life is the one of the most important criterion. Roller bearings are used mostly in mechanical equipment due to its low friction capability. Tapered roller bearing is selected and the objective function is to maximize dynamic load capacity. Design variables for the bearing include four geometrical parameters: the bearing pitch diameter, the diameter of the roller, the effective length of the roller, …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 2, 2018 · pp. 23–42 Read article
-
Artificial Neural Networks based Four-Leg Matrix Converter for Linear and Non-Linear Load
Abstract: The 4-leg matrix converter, which it is capable of providing a 3-phase plus neutral supply from a standard balanced 3-phase source . Tralatitious 3x3 matrix converters deliver bounded use in this application as they are only capable of supplying a poised three-phase payload. It would be suitable to be able to power unbalanced and nonlinear loads ,requiring that the converter provides a neutral connection .This goal can be achieved by …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 2, Issue 1, 2016 · pp. 45–53 Read article
-
A Low-Carbon Economic-Load Dispatching Using PSO Technique
Abstract: This paper presents the solution of economic-load dispatch problem with quadratic cost function by using particle swarm optimization (PSO). PSO technique is useful at solving optimization problems with both single- and multiple-objective functions with non-convex, discontinuous, noisy and non-differentiable solution. The results show that PSO has the ability of minimizing the cost of productions in power system operations. Carbon emission characteristics of all kinds of power units are analysed against …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 1, 2018 · pp. 17–25 Read article
-
The Biomechanical Impact of Slipper Sole Compliance on Lumbar Spine Load: A Quantitative Analysis of Indoor Footwear Ergonomics
Abstract: Abstract The global shift toward remote work has significantly increased the duration of indoor footwear usage, yet the ergonomic standards for slippers remain critically under-researched compared to athletic or industrial footwear. While "high-compliance" or soft slippers are traditionally marketed for immediate comfort, excessive mechanical softness may lead to foot instability, altered gait kinetics, and subsequent compensatory stress on the lumbar spine. This study aims to quantify the correlation between varying …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 1, 2026 · pp. 30–35 Read article
-
Study the Behavior of Single cell Rectangular box girder bridge with the help of AASHTO and IRC loadings
Abstract: Generally bridge carries a road or railway across natural or artificial obstacles such as river, canalor another railway or another road. Bridge construction is one of the difficult traffic infrastructureconstructions. The structural method of different girder bridge having no of girder. The modeling andanalysis of bridge structure is little bit more time consuming and costly as compared to othersstructure. In this paper present an investigation into behaviors like displacement bending …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 1–6 Read article
-
Flexure of Thick Fixed Beams Subjected to Varying Load using Shear Deformation Theory
Abstract: A refined shear deformation theory for flexural analysis of thick beams, considering transverse shear deformation effects, is developed. The number of variables as in the first order shear deformation theory is kept in present theory. The important feature of present theory is that the transverse shear stresses can directly be obtained using constitutive relations. The theory does not demand shear correction factors. The principle of virtual work is used to …
Published in International Journal of Structural Engineering and Analysis · Vol. 2, Issue 1, 2016 · pp. 23–31 Read article