Search
309 articles for “Compression”
-
Performance of Temperature on Compressive and Shear Strength of High Strength Fiber Reinforced Concrete
Abstract: ABSTRACT This paper presents the results of the experimental investigation of various strengths at elevated temperature of high strength fiber reinforced concrete (HSFRC). Variables considered in the research work are various strengths, temperature and fiber volume fractions. Various strengths considered for investigation are compressive strength, shear strength. Concrete mix of M60 grade and crimped steel fibers with aspect ratio 50 are used. The fiber volume fraction is varied from 1 …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 13–23 Read article
-
Mathematical Model for the Predictionof Compressive Strength of High Performance Concrete (HPC) Containing Saw Dust Ash and Superplasticizer
Abstract: This paper examined the prediction of compressive strength of High Performance Concrete (HPC) containing Saw Dust Ash (SDA) and Conplast SP 430 (superplasticizer), using Osadebe’s regression theory.The model developed was tested for adequacy at 95 % level of confidence using F-Statistic and was found to be reliable. A computer program written in visual basic 6.0 based on the model formulated was invoked for quick prediction of the mix ratios corresponding …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 2, 2020 · pp. 15–28 Read article
-
Prediction of Compressive strength of Periwinkle Shell Aggregate Concrete Using a Quadratic Polynomial Function
Abstract: In this study, a mathematical model is developed to predict the compressive strength of normal concrete made with periwinkle shell as coarse aggregate using a quadratic polynomial function. The response function is expressed as a multivariable function of the proportions of the component materials (water, ordinary Portland cement, sand and periwinkle shell). A total of thirty experimental runs were used to demonstrate the applicability of the mathematical model developed. The …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 10–21 Read article
-
Effect of Fly Ash on Compressive Strength of Mortar and Brick Aggregate Concrete
Abstract: This paper presents tse influence of fly ash on compressive strength of mortar and brick aggregate concrete. A lot of tests were done about strength of fly ash concrete all over the world. In those experiments, stone chips were generally used as coarse aggregate. In this experiment locally available materials such as burnt clay brick chips as coarse aggregate, sand and fly ash available in Bangladesh (Indian fly ash) were …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 7–23 Read article
-
PREDICTION OF RECYCLED CONCRETE AGGREGATE SELF COMPACTING CONCRETE COMPRESSIVE STRENGTH USING MATHEMATICAL MODEL
Abstract: Sustainable Development aims at improving the standard of life without compromising the environmental qualities and for future needs. These objectives can be achieved through recycling of construction/demolished waste. In Past, land filling of Construction and Demolished waste materials was the general solution. As raw Construction Material Charges have risen dramatically, we have to look for alternative solutions and methods, such as recycling of demolished waste. Recycled Aggregate Concrete not only …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 34–43 Read article
-
Digital Pulse Compression Waveform Generation by Using of Digital Matched Filter
Abstract: Digital pulse compression is the technique for detection of the targets through radar. It is done by Matched Filter in signal processing system. The presence of signal with noise is compressed. At some finite interval of time the high peak amplitude of signal with narrow bandwidth gives the idea of the number of targets present away from the radar. Matched filter gives the signal to noise ratio at the receiver …
Published in International Journal of Broadband Cellular Communication · Vol. 3, Issue 1, 2017 · pp. 34–39 Read article
-
Effect of Different Mix Compositions on Compressed Stabilized Earth Block Strength
Abstract: Climate change and global warming are pressing issues exacerbated by the rapid expansion of theworld's population and its housing needs. Traditional construction materials contribute significantly toenvironmental degradation through the generation of dust, solid waste, hazardous gases, and highenergy consumption. In response, this study focuses on exploring environmentally sustainablealternatives, with a particular emphasis on compressed stabilized earth blocks (CSEB). CSEBs aremasonry units formed by compacting soil, stabilizers, and water. This research …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 10, Issue 1, 2024 · pp. 33–43 Read article
-
Simulation Models for Flexural and Compressive Strength of Concrete Using Waste Glass as Partial Replacement.
Abstract: The research present the usefulness of waste glass in the production of grade 20 concrete using partial replacement levels of 0%, 20%, 40% and 60%, respectively, for coarse glass and fine glass to coarse aggregate and fine sand aggregate. The results obtained indicate that, for the purpose of construction works, 20% replacement should be adopted either for coarse glass or fine glass replacement. Simulation models were established to predict flexural …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
A Review of Video Compression Technique of an Efficient Rate-Distortion
Abstract: The digital video compression technology has been gaining popularity for many years. Today, when people enjoy HDTV (high-definition television), movie broadcasting through the Internet, or the digital music, such as MP3, the convenience that the digital video industry brings to us cannot be forgotten. All of these should attribute to the advances in compression technology, enhancement on mass storage media, or streaming video/audio services. Most rate-distortion optimized division way of …
Published in International Journal of Digital Communication and Analog Signals · Vol. 4, Issue 2, 2018 · pp. 1–8 Read article
-
Fibre reinforced polymers for compressed hydrogen storage vessels: An overview
Abstract: Fibre reinforced plastics (FRPs) represent an interesting class of composite materials that is gaining importance in the fabrication of various mechanical components as a substitute for metals and alloys, particularly lightweight and high strength pressure vessels for compressed gas storage. They are an important component of hydrogen energy system for vehicular applications, where compact and safe on-board storage of hydrogen gas as a fuel at high pressures of up to …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 1, 2018 · pp. 18–29 Read article
-
Mechanical characterization of hybrid natural fibre composites developed through compression moulding process
Abstract: Increasing environmental concerns these days due to excessive consumption of fossil-fuel products have impacted our atmosphere, which has led several researchers to work in the field of polymer composites reinforced by natural fibres. In this research, the emphasis is on developing the completely biodegradable green composites using polylactic acid (PLA) as a matrix and reinforcement with jute and sisal fiber by compression molding method and effect of various parameters on …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 29–35 Read article
-
Compressive Behaviour of Pristine and Impacted Composite Laminates: Numerical Simulations and Experimental Studies
Abstract: To predict the compressive strength, various failure criteria studied in this article include are Tsai-Wu, Hill, Hoffman, Maximum Stress and Quadratic. The quadratic failure criterion has been implemented using PATRAN Command Language (PCL). Is observed that quadratic failure criterion provides least failure indices, employed for conservative design. The compressive strength of the pristine and impacted laminate computed using analytical experiment, and finite element analysis (Numerical) commercial packages. Experimental program employing …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 2, 2016 · pp. 19–32 Read article
-
Third Generation Biofuel as Alternative Fuel for Compression Ignition Engine
Abstract: In recent years, many researchers have tested compression ignition engines with the goal of creating a diesel fuel alternative. This was also published in literature. The limited supply and increased cost of petroleum products are two main reasons for the search for alternate feedstocks for biodiesel. This paper reviews the potential of alternative biodiesel feedstocks to replace petroleum diesel, specifically focusing on algae biodiesel and the process for producing biodiesel. …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 12, Issue 1, 2026 · pp. 10–15 Read article
-
Performance Evaluation of Geopolymer Masonry Units Using Fly Ash and GGBFS: Dimensionality, Density, Water Absorption, and Compressive Strength Analysis
Abstract: AbstractThis study investigates the production, properties, and performance of geopolymer masonry units,utilizing Class F fly ash and Ground Granulated Blast Furnace Slag (GGBFS) as primary binders.These binders were activated using an 8M alkaline solution, with the materials mixed alongsidemanufactured sand (M-sand) as the fine aggregate. The binder-to-aggregate ratio was maintained at1:1, while the alkaline solution-to-binder ratio was kept at 0.2. Various geopolymer masonry units,including geopolymer bricks (GPB), solid blocks (GPSB), …
Published in International Journal of Construction Engineering and Planning · Vol. 10, Issue 2, 2024 · pp. 26–32 Read article
-
Compressive Strength, Water Absorption and Temperature Effects on Partial Replacing Cement with GGBS, Micro Silica and Fly Ash
Abstract: Widespread research work for decades also in development throughout the globe in concrete technology in finding substitute materials which can incompletely change Pozzolonic Portland Cement (PPC) and which can also meet the necessities of the strength and durability performance of industrial by products like micro silica, ground granulated blast furnace slag, fly ash, etc. now termed as complimentary cementations materials (CCM) are quite promising. The increased quest for sustainable and …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 30–37 Read article
-
Abrasion resistance, compressive strength and elasticity modulus of recycled aggregate concrete (RAC) included lower quality recycled aggregate with and without silica fume
Abstract: The usage of recycled aggregate (RA) for concrete works is spreading for gaining wide acceptance around the world, and total amount of RA utilized in concrete industry increases day-by-day. RA is used in many concrete products, such as concrete interlocking blocks, pavements, etc. One of the physical causes of concrete deterioration is surface wear or loss of mass for concrete products which are especially exposed to vehicular traffic (i.e., industrial …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 1–18 Read article
-
Prediction of Compressive Strength of Concrete with Decision Trees
Abstract: In the past few researchers predicted the compressive strength of concrete from its ingredients employing data driven technique like artificial neural network (ANN) and Decision Tree (DT). For Indian concrete records, only one study was available which had employed ANN for prediction. Evaluation of different performance metrics indicated that there was scope of improvement in the prediction performance. In this paper experimental data from the literature was utilized for development …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 19–29 Read article
-
Effect of variation of Elevated Temperature on Compressive Strength of Metakolin concrete
Abstract: It has been found that high early temperature has negative impacts on later compressive strength of concrete. Some researchers investigated the adverse effect on long term strength of concrete due to high initial temperature. The effect of temperature on different properties of concrete is considerable and remained the subject of research activities of a lot of researchers. Different investigators moved in different ways and investigated temperature effect by changing different …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 9–16 Read article
-
Effect of Elevated Temperature on Compressive Strength and Flexural Strength of Fiber Reinforced Concrete
Abstract: Now a day concrete is being used extensively in the construction that might be subjected to elevated temperatures. The behavior of concrete structures at elevated temperatures is significant importance in predicting the safety of structures in response to certain accidents or particular service conditions. This paper deals with the mechanical properties of concrete with steel fibers subjected to temperatures up to 500°C. The specimens were kept in oven for 1 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 19–32 Read article
-
A Technical Analysis of Fly Ash Concrete for Compressive Strength
Abstract: Fly ash is a waste produced by thermal power plants and used as a supplementary cementitious material (SCM) in the production of Portland cement concrete. A supplementary cementitious material, when used in combination with Portland cement, pays to the properties of the hardened concrete through hydraulic or pozzolanic activity, or both. At present fly ash, is a big environmental concern and issues. The analysis presented in this paper is carried …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 21–24 Read article