Search
539 articles for “composition”
-
Auxiliary Characterization of (Co, Mn) Co-doped Zinc Oxide Thin Films
Abstract: Cobalt and manganese are both co-doped with zinc oxide films were set up by sol-gel turn covering strategy on quartz substrate by shifting the dopants focus. The result of dopants focus was researched by x-beam diffraction (XRD). The XRD design demonstrates that the kept movies have polycrystalline hexagonal wurtzite structure. SEM micrograph demonstrates the adjustments in morphology of very thin film as dopants fixation are fluctuating. The compositional examination did …
Published in International Journal of Metallurgy and Alloys · Vol. 2, Issue 1, 2016 · pp. 31–35 Read article
-
Relevance and Utilization of Copper and Copper Alloys
Abstract: Copper is the oldest metal used by man. It is use dates back to prehistoric times. Copper has been mined for more than 10,000 years with a Copper pendant found in current day Iraq being dated to 8700 BC. By 5000BC Copper was being smelted from simple copper oxides. The combination of physical properties such as strength, conductivity, corrosion resistance, machinability and ductility make Copper suitable for a wide range …
Published in International Journal of Metallurgy and Alloys · Vol. 3, Issue 2, 2017 · pp. 11–16 Read article
-
Comparative Study of Machining Parameters on Electrical Discharge Machining of Inconel 718 using Copper and Copper- Tungsten Electrode.
Abstract: The present scenario in all the manufacturing industries is to make a priority list to cope up the challenges imposed by the superior materials like alloys, ceramics and composite materials which have difficulty for machining. In this study, comparison of experimental results which is found by optimization of machining parameters on material removal and tool wear rate along with two different electrodes material such as copper and copper tungsten for …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 1–8 Read article
-
Organic Compound 5-(4-methoxybenzyl)-N-phenyl-1,3,4-thiadiazol-2-amine and NiS filler used to Mitigation the Corrosion of Mild steel and in Marine Atmosphere
Abstract: The concentration of chloride ions is higher in marine atmosphere. The bulk amount of mild steel uses in sea weather for different works. This metal is very sensitive in chloride ions. It produces hostile environment for mild steel. Chloride ions develop corrosion cell on the surface of mild steel and it changes their external and internal morphology as well as physical, chemical and mechanical properties. Mild steel exhibits corrosion reaction …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 56–64 Read article
-
Mechanical properties of Al-Si17Cu3.5Mg0.8 alloy fabricated by stir casting with UV and new CRSS casting process with and without T6 condition
Abstract: Aluminum-Silicon metal matrix composites are the popular materials in the vast majority of the car and modern industries on account of their low weight, high mechanical properties, and incredible wear opposition properties. In the present study, Al-Si17Cu3.5Mg0.8 alloy is fabricated by two casting processes such as stir casting with ultrasonic vibrations (RSC) and merged-rheo-stir-squeeze (CRSS) casting with and without heat treated (T6) condition. Microstructural and material characterization was explored by …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 15–24 Read article
-
Study of the effect of Silicon oxide nanoparticles in the copper alloy
Abstract: The main objective of this paper is to study the effect of the Silicon oxide nano particles in the copper alloy which is manufactured by using the stir casting process and samples are prepared as per the ASTM standards. These specimens are tested under the mechanical tests. Due to blending of the nanoparticles the properties of copper alloy will be enhanced. so uniform ASTM samples with varying composition of nano …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 24–31 Read article
-
MANUFACTURING AND TESTING OF CNT BLENDED NAVAL BRASS
Abstract: The Utilization of advanced technologies increased the scope of producing new materials drastically .as a result wide spectrum of nanomaterials are being produced these materials are manufactured as per the desired properties in the final material /composite. The aim of this study is to investigate the effect of CNT (Carbon Nano Tubes) reinforcement into naval brass (Cu-CNT 60%, Zinc 39%, and Tin 1%) naval brass is widely applied in the …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 7–11 Read article
-
Ability of Metallic Materials to Resist Surface Damage Induced by High-temperature Action of Air or other Gaseous Mediums
Abstract: The features of the oxide layer scale that forms on the metal's surface and limits gas penetration into the metal, limiting the growth of gaseous corrosion, influence a metal's or alloy's oxidation resistance in an oxidising atmosphere. The rise in weight of sample being tested (due to oxygen uptake by the metal) or even the weight loss after removing the scale from the sample's surface, related to a unit surface …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 16–21 Read article
-
Studying the Effects of Extracts that Prevent Corrosion on Sheet Metal in an Acidic Condition
Abstract: The prevention of corrosion in steel materials in acidic conditions is summarized in this paper. There are many accelerated corrosion preventives for acidic solutions available. High temperatures, lowgrade steels, and HCl solutions are the main focus points. The creation of corrosion inhibitor compositions which combine corrosion inhibitors with surfactants, solvents, and expressions to increase the potency of single compounds at extreme temperatures is another focus of this analysis. This review’s …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 22–26 Read article
-
Nanocoating and Electrospray Techniques Use to Mitigation Corrosion Sculptures
Abstract: The most sculptures of the world are created by the brass, bronze, iron, silver, gold and metalloid. They come in contact of corrosive pollutants to produce chemical, electrochemical and biochemical reactions and develop various form of corrosion like uniform corrosion, galvanic corrosion, pitting corrosion, stress corrosion and crevice corrosion. The corrosive gases CO2, NO2 and SO2 concentrations increase in atmosphere rapidly after industrialization. The major contributors of these gases are …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 1–11 Read article
-
Comparative Study of the Nature of Slag in the Formulation of Concrete Pavers
Abstract: The steel mill generates about 8000 tons/year of slag by transforming scrap metal to produce more than 60000 tons/year of wire rod and steel reinforcing bars. These co-products are stored or used for backfill. With this almost inexhaustible slag deposit, Morocco has a valuable resource thanks to its high content of silicates, lime and metal oxides. This has led to the attempt to valorize it in the manufacture of paving …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 12–27 Read article
-
Modern Material Concept to Produce Low-Loss Non- Oriented Electric Alloys
Abstract: The production of energy-efficient materials is an essential aspect of modern society, with efforts focused on reducing energy loss and conserving resources. A key element in the creation of energy-efficient electrical equipment, such as transformers, generators, and motors, is low-loss non-oriented electrical steel. In this regard, material design is a promising approach to improve the properties of non-oriented electrical steel. This paper presents an overview of material design for low-loss …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 37–42 Read article
-
Recycling Multilayer Materials: Discovering Mechanical Parameters for Engineering Applications
Abstract: Multilayer materials have been widely used in various applications such as packaging, electronics, and construction industries. However, the disposal of these materials is becoming a significant environmental concern due to their non-biodegradable nature. Therefore, the recycling of multilayer materials has become an essential aspect of sustainable waste management. The mechanical characteristics of materials recycled from multilayer products were examined in this study. The focus was on determining the impact of …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 43–47 Read article
-
Exploring Alloys: Properties, Applications, and Future Trends
Abstract: Alloys, integral to modern technology and engineering, are combinations of metals with other elements designed to enhance material properties. This exploration delves into the diverse properties, widespread applications, and emerging trends in alloy development. The study examines mechanical properties such as strength, ductility, and corrosion resistance, which are tailored through compositional variations and processing techniques. Applications across various industries—including aerospace, automotive, electronics, and biomedical fields—are highlighted, showcasing the versatility and …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 1, 2023 · pp. 13–19 Read article
-
Corrosion Resistance in Modern Metallurgical Alloys: Mechanisms & Mitigation Strategies
Abstract: Corrosion resistance in metallurgical alloys is a critical factor in their application across various industries, including aerospace, automotive, marine, and construction. This paper delves into the fundamental mechanisms of corrosion, such as galvanic, pitting, crevice, intergranular, and stress corrosion cracking, which significantly affect the longevity and reliability of alloys. It explores the intrinsic and extrinsic factors influencing corrosion behavior, including alloy composition, microstructure, environmental conditions, and mechanical stresses. Advancements in …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 2, 2023 · pp. 30–34 Read article
-
Characterization of CeO2-NiO Thin Film Produced by Jet Nebuliser Technique
Abstract: CeO2 –NiO composite solution was sprayed as thin films by using JET nebulizer technique at the substrate temperature of 250°C. The film was characterized by X-ray diffractometer and crystallite size, lattice constant, crystallinities, phase transformations were measured. The UV-Vis spectrometer analysis was used to calculate the band gap, absorbance and percentage of transmission of the thin films was reported. The emission and excitation spectra of the sample were reported. The …
Published in International journal of Nanobiotechnology · Vol. 7, Issue 1, 2021 · pp. 1–17 Read article
-
Recent Advances in Aquasomes Carrier Nanotechnology for Drug Delivery
Abstract: Aquasomes are a nanobiopharmaceutical carrier device with nanocrystalline calcium phosphate or ceramic diamond particle center and a polyhydroxyl oligomeric film covering them. Aquasomes are spherical 60–300 nm objects that are used to deliver drugs and antigens. It was an effective carrier mechanism for bioactive molecules such as peptides, proteins, hormones, antigens, and genes to particular locations because of properties such as defense and preservation of fragile biological molecules, conformational integrity, …
Published in International journal of Nanobiotechnology · Vol. 7, Issue 1, 2021 · pp. 35–44 Read article
-
Extracellular One Pot Green Synthesis of Palladium Nanoparticles
Abstract: Extracellular in-situ synthesis of metal nanoparticles using extracts of plants like Azadirachta indica (Neem), and Zingiber officinale (Ginger) has been successfully carried out earlier. In this study, we have developed a novel method to synthesize Palladium nanoparticles by the process of bio-chemical reaction between Palladium salt solution with seed extract of Coriandrum sativum without using any surfactant or external energy. By this method, physiologically stable, bio-compatible Pd nanoparticles (NPs) were …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 1, Issue 1, 2015 · pp. 1–7 Read article
-
Synthesis and Characterization of Nickel Doped BFO Nanoparticles
Abstract: In the present, work we have synthesized the pure and Nickle doped bismuth ferrite at different concentration by the chemical route method. Increasing in the doping concentration leads to generation of secondary phase, thus dopant concentration is maintained to 5mol%. XRD was used to confirm the phases transformation of nanocrystalline composite materials along with measurement of the crystallite size. Scanning electronic microscopy (SEM) was used to study the morphological properties …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 4, Issue 1, 2018 · pp. 17–29 Read article
-
Synthesis of Silica Nanoparticles using Sodium Silicate Solution by Sol Gel Method
Abstract: The most commonly used route for synthesizing silica nanoparticles is sol-gel method due to its ability to produce monodispersed with narrow-size distribution nanoparticles at mild conditions. Recent advances in the sol-gel process for synthesis of monodispersed, narrow-size distribution nanoparticles have boosted the development of silica-polymer nanocomposites significantly. The focus of this research is on the synthesis of silica nanoparticles, size-dependent property characterization, and surface modification for the creation of homogenous …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 1, 2021 · pp. 28–31 Read article