Search
650 articles for “Simulation”
-
Predictive Modelling of a Bioreactor for the Production of Ethanol Using Palmwine
Abstract: This research focuses on the feasibility of biochemical technology with yeast cells (Sacccharomycees cerevisiae) for continuous ethanol production from palm wine. This was carried out in a non-isothermal batch reactor at constant room temperature. 1.5L of palm wine solution was reacted with dry active baker’s yeast until reaction was completed. Biomass, ethanol and glucose concentration were sampled every two hours, and kinetic rate parameters for the fermentation calculated using concentration/time …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 5, Issue 2, 2019 · pp. 1–8 Read article
-
Design of a Continuous Stirred Tank Reactor for Acetic Acid Production Using Homogeneous Catalyzed Reaction
Abstract: The carbonylation of methanol to give acetic acid is one of the most important homogeneously catalyzed industrial processes. Detailed work has been carried out by researchers on its kinetic study and attempt to increase the activity of the catalyst. In this work attention is focused on the design of a continuous stirred tank reactor (CSTR) for the production of 210, 000 tons per year of acetic acid. At a maximum …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 7, Issue 1, 2021 · pp. 17–38 Read article
-
Thermodynamic Equilibrium Modeling of Sunflower Husk Gasifier to Produce Synthesis Gas
Abstract: Energy from biomass offers the great attraction in producing useful gaseous component resulting in low emissions and providing energy security. In the present study a gasifier model was developed using commercial Aspen Plus simulator. The model developed was based on the minimization of Gibb’s free energy and is validated with the experimental data of sunflower husk gasification using air as a gasifying agent. The results predicted are in good agreement …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 2, Issue 2, 2016 · pp. 14–24 Read article
-
Comparative Study on Production and Characterization of Bioethanol from Agricultural Waste Materials
Abstract: Production and characterization of bioethanol from lignocellulosic substrates that include sugarcane bagasse, corn cob and cassava peels were investigated in this research study. The raw materials (sugarcane bagasse, corn cob and cassava peels) were sorted, washed, cleansed to remove dirts and dried to remove moisture contents, and crushed into ground form to increase substrate’s surface area of contacts and sieved through a mesh size of 2 mm. The bioethanol distillates …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 1–9 Read article
-
Nanofluids for the Synthesis of Solar Thermal Energy
Abstract: The use of Al2O3-Water nano-fluids in a solar flat plate collector to increase solar energy collection and conversion is examined in this research (SFPC). Both experimental and theoretical analysis is done to determine how effective a solar flat plate collectors is while using water as the fluid medium. Al2O3- Water nanofluid was chosen as the fluid medium to increase the SFPC's capacity for solar energy collecting and conversion. A few …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 22–25 Read article
-
Parametric Analysis of Ribbed Channels for Gas Turbine Engines
Abstract: This work uses experimental data to validate a ribbed surface that is computationally examined interior passageway of a static blade on a turbine. to replicate an illustration from a released publication while researching the Computational Fluid Dynamic conjugated heat transmission. The turbulence simulation matched the most closely. Publicly available physical practical results were found by working on Ansys Workbench. Convective heat exchange efficiencies additionally to stress profiles utilizing those computationally …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 9, Issue 2, 2023 · pp. 28–34 Read article
-
Life Origin on Earth, Knowledge Development
Abstract: An enigmatic and important feature of life origin on Earth is embodied with a number of different hypotheses and knowledge based on experimental data and biomedical principles. These hypotheses and understanding generally contain some small-scale experimental simulation, chemical structure comparisons and a series of guesswork from existing biological knowledge and principles. So far, there is no widely agreement of single hypothesis without significant arguments and conflicts between researchers of different …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 1, 2020 · pp. 24–28 Read article
-
Prediction of Step Input Response on Pneumatic Proportional Derivative Controller. The Concept of Transfer Functions
Abstract: Computer programme language of MATLAB software was used to monitor, predict and simulated the characteristics of step input response on pneumatic proportional derivative controller with the concept of transfer functions. The prediction of step input response on pneumatic proportional derivative controller was examined using the concept of transfer function. A model equation was also developed to give account of the response of on pneumatic proportional derivative controller. The equation was …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 1, 2020 · pp. 35–44 Read article
-
Review of Silicon Reactivity of Self-assembled monolayer and its Properties
Abstract: In most cases, the assumption of perfect high viscosity between silicon and silver underlies the modelization of silicene on Ag(111). According to recent reports, growth does not take place on top of the Ag(111) terraces, but rather within the first layer of them. In this article, we present the results of a study that combines scanning tunnelling microscopy and density functional theory to simulate the nucleation process and reveal the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 29–33 Read article
-
Thermodynamic Optimization of Renewable Energy Processes
Abstract: In the pursuit of sustainable energy solutions, the thermodynamic optimization of renewable energy processes plays a crucial role in enhancing efficiency and reducing environmental impact. This paper explores the principles and methodologies involved in optimizing various renewable energy systems, including solar, wind, biomass, and geothermal energy. By leveraging the fundamentals of thermodynamics, the study examines key parameters and performance indicators to identify optimal operating conditions and design configurations. The analysis …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 2, 2023 · pp. 31–37 Read article
-
Hot and Cold Fluid: The Concepts of Split Range Control Model
Abstract: The MATLAB tools were used in the research for monitoring the potential of hot and cold fluid application and the integrity of split range control model as related to the effect of temperature. The temperature of the cold fluid was within the room temperature and the temperature of the hot fluid was at elevated temperature. The research showcases decrease in hot fluid with increase in cold fluid, which demonstrate the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 1, 2023 · pp. 28–39 Read article
-
Monitoring Fungi Transport Influenced by Heterogeneous Porous Sand Gravel Formation in Coastal Area of Port Harcourt
Abstract: This paper monitors the transport of fungi concentration in sand gravel formation, the formation were observed to develop heterogeneity in porous deposited strata, the migration process of fungi were observed from the simulation values through graphical representation, fluctuation of fungi concentration were experienced on the process of migration in exponential phase, the deposition of micronutrients were found to be under fluctuation in the soil thus affect the growth rate of …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 49–57 Read article
-
Clash Detection in Appropriate Technology Building Using Building Information Modelling (BIM)
Abstract: Building Information modelling (BIM) is a highly efficient software in Architecture, Engineering and construction (AEC industry). Clash detection technique is used to minimize the error as well as to minimize the cost and time. Especially in 2D drawings, lots of problems emerges at the time of execution. One of the best tools used in this project is clash detection tool which coordinates the building system in 3D models. This clash …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 15–24 Read article
-
Re-Characterization of Strength Properties of Asphalt Concrete Mixtures Using Non Bituminous Modifier – Candle Wax
Abstract: Improving the performance of asphalt concrete mixtures synonymous with flexible pavement has been a major concern in highway engineering. However, design of flexible pavement begins with proper material characterization to ensure that designs are appropriate. It is also pertinent to say that sometimes if not most times the properties of the individual materials that make up the pavement structure falls short of desired expectations. This has led to exploring techniques …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 30–36 Read article
-
Improving Durability of Asphalt Pavement Wearing Course Submerged in Water Using Candle Wax as Water Proofing Agent: An Assessment Using RSI, FDI and SDI
Abstract: Asphalt pavements are designed and constructed to meet mostly stability and durability requirements during its design life. However, durability of asphalt pavements also heavily depends on other physical parameters as good drainage facility apart from having good material mix and structural designs. In the wake of asphalt pavements not supported by good drainage measures it is very likely that these pavements will fail sooner than later. On this basis, the …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 1–10 Read article
-
FLUENT ANALYSIS ON EARTH HEAT EXCHANGER WHERE AIR AS A FLOW MEDIUM
Abstract: Renewable energy is the best source of energy. It is abundant in nature, it’s just like a gift of god. Nowadays, heating and cooling is a major issue in environment due to global warming. A major part of energy is being engaged in such issues. So Earth tube heat exchanger is a renewable source of energy for heating and cooling of any building. Here, in this study we will perform …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 43–68 Read article
-
Object Reconstruction Using Phone and Compact Camera
Abstract: Previously, a 3D model can be produced by using high resolution and metric camera in close range photogrammetry technique. In this study, there were two types of camera used; the compact camera (Nikon COOLPIX L120) and phone camera (Samsung Galaxy Note1). Two objects were selected; i.e., a biscuit container as for simulation and water tank as the real object. 3D models for both objects were validated by using a measuring …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 21–30 Read article
-
An Analysis of Ujjani Reservoir in Solapur, Maharashtra, India, Using Mathematical Modeling and Satellite Remote Sensing Techniques for Sedimentation Studies
Abstract: The reservoir's storage capacity steadily decreases due to sedimentation. The reservoir life can be preserved by monitoring sedimentation and implementing appropriate management measures. The Ujjani dam was built for power generating, irrigation, and water delivery systems. It is located in the drought-prone Solapur district, due to which Ujjani is an important initiative for the region's economy and society. In the present study, the Ujjani reservoir's sedimentation is evaluated for monitoring …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Comparative Study on Reinforced Cement Concrete Structures and Concrewall Structures
Abstract: Developing countries especially those in India, are facing the challenge of a growing middle class with greater demand for housing facilities. Faster and more affordable methods of construction are being sought after it, more than ever before as the action of emergency response. Increased innovation aimed at reducing the cost of construction, and creating affordable housing, is being integrated into methods of building and construction. This has led to introduction …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 8–11 Read article
-
Reviewing on the Performance of Masonry, Reinforced Concrete and Underground Tunnels against Blast Loading
Abstract: An explosion on the elevated structures caused by terrorist activities or manmade events can induce significant deformations in the Civil Engineering structures. Therefore, it is necessary to review the response of the structural systems such as masonry structures, reinforced concrete building structures and reinforced concrete tunnel. In order to understand the scope for protecting such a structures and the structural behaviour under blast loading, a detailed literature review is conducted. …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 1, 2021 · pp. 31–42 Read article