Search
539 articles for “composition”
-
Extraction,Characterization and Optimization of pectin from Banana peel by using Acid Extraction
Abstract: This paper basically focused on the production of pectin from banana peel, an agricultural waste. The production process used in this work was raw material collection from Hawassa City, and characterizing the raw material for its physic-chemical composition. The raw material was prepared and grinded to a averageparticle size of 0.25mm after drying at a constant temperature of 600C. The extraction of oil from the banana peel was conducted using …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 2, 2020 · pp. 27–48 Read article
-
Vapor Liquid Equilibrium Study of Propylene Carbonate-water and its Comparison with Various Thermodynamics Models Using Dwsim Simulation Software and Group Contribution Method
Abstract: In present study, green solvents that are environment friendly in nature were considered because it will reduce the environment pollution by replacing the petroleum derived solvents. Solvent used in chemical industry were mostly derived from the petroleum crude oils. Solvent emission increases the environment pollution. With the use of green solvents, closed carbon cycle will reduce the environment pollution drastically. Bio-derived solvents are the recent replacement of petroleum solvents that …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 2, 2023 · pp. 1–8 Read article
-
Bioethanol Production from Corncob Cellulosic Biomass: RSM and ANN based Optimization for Dilute Acid Pretreatment
Abstract: To increase the yield of fermentable sugars, the complexity of lignocellulosic biomass requires a pretreatment method. Dilute acid hydrolysis was used to efficiently pretreatment corn cobs. The aim of this study was to characterize corncob and investigate the effect of process parameters on total reducing sugar (TRS) yield during dilute acid hydrolysis pretreatment of corncob biomass. The morphology and microstructure of the samples were examined using an X-ray diffraction machine, …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 2, 2023 · pp. 16–34 Read article
-
Core/Shell structures embedded polyaniline nanocomposite for Solar cells
Abstract: The synthesis and characterization of the conducting polyaniline (Pani) films embedded with Co2+ doped, PVA capped PbS/ZnS core-shell particles as photoluminescent boosters is reported. The photoluminescence intensity of the core-shell particles –Pani film had increased significantly.Periodic arrangement of the nanoclusters of the core-shell particles in the continuous conductive polymer matrix and high carrier density promise this material for the photoelectrochemical applications. Solid -state photovoltaic cells have been fabricated with PbS:Co/ZnS-Pani …
Published in International Journal of Environmental Chemistry · Vol. 4, Issue 1, 2018 · pp. 8–18 Read article
-
Evaluation of Some Trace Metals (Zn, Cd, Cu and Pb) in Sewage Sludge Samples Taken from Some Pumping Stations in Benghazi-Libya
Abstract: Due to the little data available on the levels of trace metals concentration in sewage sludge in and around Benghazi city, it was necessary to determine the current concentration, composition, distribution and sources of trace metals in the sludge of different wastewater treatment plants. Accordingly, raw sewage sludge samples collected from sixteen wastewater-pumping stations at Benghazi city have undergone evaluation of pH and some trace metals concentrations (mainly Zn, Cd, …
Published in International Journal of Environmental Chemistry · Vol. 6, Issue 2, 2020 · pp. 13–19 Read article
-
Hydro-Geochemical Analysis of Groundwater of a Micro-Watershed (MWS) of Banas River Basin, Rajasthan, India
Abstract: About 5.25 billion population of the world have depend on groundwater to meet their water needs, and the growth of agriculture and human health have both been significantly affected by groundwater quality. Land use, surface-and-subsurface geology, and soil characteristics all have an effect on groundwater composition, which in turn affects groundwater quality. Fluoride, nitrate, chloride, CaCO3, and salt are the main problem in groundwater quality in Rajasthan. Groundwater quality data …
Published in International Journal of Environmental Chemistry · Vol. 9, Issue 1, 2023 · pp. 1–23 Read article
-
Development of Geo-Polymer based Light Weight Bricks
Abstract: Light weight geopolymer bricks were developed during this study. The mix was made with lime sodium silicate and fly ash as ingredients. A maximum shrinkage was observed at CaO lime ratio of 1.0. Bulk densities were also lower at the ratio of 1.0. The maximum cold crushing strength (CCS) value was found at the ratio of 0.745. Increase in mix water decreased the strength. Water content of 24% is recommended …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 1, Issue 1, 2015 Read article
-
Studies on Zirconium(IV) Telluroiodate: A New Heteropolyacid Based Inorganic Ion Exchange Material
Abstract: Zirconium (IV) telluroiodate has been synthesized as a new inorganic cation exchanger by adding a mixture of aqueous solution of 0.1 M potassium iodate and 0.1 M sodium tellurite to aqueous solution of 0.1 M zirconium (IV) oxychloride under varying mixing ratios at pH 1. Its ion exchange capacity for Na+ was found to be 1.85 meqg1 of dry exchanger. The material has been characterized on the basis of chemical …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 2, Issue 1, 2016 Read article
-
Study of Corrosion Rate in Water Treatment Plant in Oil field
Abstract: The high cost of corrosion, the corrosion engineers concern and its reduction in oil, gas and petrochemical countries is essential about 10% of the cost of producing a barrel of crude oil cost. Corrosion rates in the world costs 42–80 cents a barrel for crude oil is produced, specific climatic conditions, history of the country's refineries and oil production are the main factors affecting the cost of corrosion in oil …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 1, 2017 Read article
-
Preparation and Evaluation of Nano pore Faujasite Membranes
Abstract: Nano pore Faujasite zeolite membranes were synthesized by in-situ hydrothermal method on porous ceramic tubes. Hydrothermal crystallization was carried out under an autogenously pressure and at a static condition of 100 oC. Molar composition of the starting gel of Faujasite zeolite membranes were NaX: SiO2/Al2O3=10-27, Na2O/Al2O3=4-9, H2O/Al2O3=250; NaY: SiO2/Al2O3=2.5-4, Na2O/SiO2=1.08-2, H2O/Na2O=30-200. X-ray diffraction (XRD) patterns of the membranes exhibited peaks corresponding to the support and the zeolite. The crystal species …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 2, 2017 · pp. 15–24 Read article
-
Experimental Study on Synthesis of Shear Thickening Fluid
Abstract: A novel class of nanosuspension material called shear thickening fluids (STFs) are created by dispersing micro- and nanoparticles in a dispersant. It is an intelligent material with excellent performance. When a modest shear rate is used, STFs are easily distorted. A material with noticeably improved characteristics is produced by this mixture (STF) of flowable and rigid components at a certain composition. Silica nanoparticles dispersed in a liquid polymer solution were …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 8, Issue 2, 2022 · pp. 1–6 Read article
-
Thermodynamic Equilibrium Modeling of Sunflower Husk Gasifier to Produce Synthesis Gas
Abstract: Energy from biomass offers the great attraction in producing useful gaseous component resulting in low emissions and providing energy security. In the present study a gasifier model was developed using commercial Aspen Plus simulator. The model developed was based on the minimization of Gibb’s free energy and is validated with the experimental data of sunflower husk gasification using air as a gasifying agent. The results predicted are in good agreement …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 2, Issue 2, 2016 · pp. 14–24 Read article
-
Development of Effective Electrodes and Electricity Generation in Continuous Microbial Fuel Cell using Poultry Wastewater
Abstract: The Microbial Fuel Cell was designed for batch and continuous operations and the electrodes were developed using a simple and effective technique known as phase inversion. The different combinations of electrodes were used in the experiment to get the maximum power output and organic matter removal. The poultry wastewater was used as substrate and was comparatively studied with Luria Bertani (LB) solution. The best combination of electrode was found to …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 4, Issue 1, 2018 · pp. 1–11 Read article
-
Development of Efficient Electrode and Design of Microbial Fuel Cell to Generate Electricity from Waste Water
Abstract: The study was focused on the development of composite electrodes and design of Continuous Microbial Fuel Cell to generate electricity from waste water. The electrodes were developed with different combinations of catalysts using phase inversion technique. In MFC Nafion 117 membrane was used as a proton exchange membrane and sewage waste water as substrate for the E.coli bacteria, which decomposes the organic matter and produces electrons. Different combination of electrodes …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 7, Issue 1, 2021 · pp. 7–18 Read article
-
Studies on the Kinetics of Thermal Decomposition of Copper Oxalate Mixed With Silver Oxalate
Abstract: The coprecipitates, Ag2Cu(C2O4)nH2O of varying composition [Ag = (1 and 2)%], have been synthesized and were characterized by means of IR, XRD, and SEM. The decomposition of the prepared oxalates was monitored by differential scanning calorimetry (DSC) and thermogravimetry (TG). The DSC studies reveal that the decompositions of the mixed oxalates were all complex exothermic processes with resemblance to the exothermic reaction of copper oxalate and ranges from 540 to …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 2, Issue 1, 2016 · pp. 1–11 Read article
-
Thermodynamic Techniques in Food Chemistry – A Review
Abstract: The thermal activities of food strongly depend on its composition. The aims of food processing are to inactivate spoilage and pathogenic microorganisms and to sustain this condition in storage. Using calorimetric techniques, many physicochemical effects can be detected in the temperature range between -50°C and 300°C. Biophysical techniques viz., isothermal titration (ITC) and Differential Scanning Calorimetry (DSC) are used to characterize the structure and properties of food materials before and …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 3, Issue 2, 2017 · pp. 1–6 Read article
-
Review of Thermodynamic Effect on Atmosphere
Abstract: The study of heat-to-work transitions that occur in the earth's atmosphere and manifest as weather or climate is known as atmospheric thermodynamics. The laws of classical thermodynamics are used in atmospheric thermodynamics to describe and explain phenomena such as moist air characteristics, cloud formation, atmospheric convection, boundary layer meteorology, and vertical instabilities in the atmosphere. Thermodynamics is more specifically concerned with the conversions of energy into mechanical energy and mechanical …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 38–43 Read article
-
Corrosion Protection of Copper Metal by Nanocoating in Nitrogen dioxide Environment
Abstract: Nitrogen dioxide is an acidic gas. It absorbs moisture to produce nitric acid. It creates corrosive medium for copper metal. It forms corrosion cell on the surface of copper and accelerate corrosion reactions. The corrosion cell formation is written as: Cu|Cu2+||H+|H2 thus corrosion reactions start and copper is oxidized into Cu2+surface and it is oxidized into Cu2+ whereas H+ ion is reduced into H2. Nitric acid environment copper exhibits galvanic, …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 1–11 Read article
-
A Comprehensive Characterization of Zinc Chloride: Unveiling its Role as a Hygroscopic Preservative and Drying Agent through Elemental, Structural, and Morphological Analysis
Abstract: This study presents a detailed investigation of Zinc Chloride( )) utilizing the following different analytical techniques, X-ray diffraction(XRD), Electron Dispersive Spectroscope (EDS), Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM). Zinc Chloride was synthesized using the hydrothermal method. The elemental, structural, morphological, and optical properties of Zinc Chloride ( )) were thoroughly analyzed. The hygroscopic nature and properties of Zinc Chloride upon exposition to air was revealed and its weight/mass …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 2, 2023 · pp. 13–19 Read article
-
Hot and Cold Fluid: The Concepts of Split Range Control Model
Abstract: The MATLAB tools were used in the research for monitoring the potential of hot and cold fluid application and the integrity of split range control model as related to the effect of temperature. The temperature of the cold fluid was within the room temperature and the temperature of the hot fluid was at elevated temperature. The research showcases decrease in hot fluid with increase in cold fluid, which demonstrate the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 1, 2023 · pp. 28–39 Read article