Search
1136 articles for “Models”
-
Investigating Pipeline Integrity Failure as a Result of Corrosion
Abstract: The study reviewed different failure factors and data of onshore crude oil pipelines covering corrosion, external interference, structural defects, and operators’ errors. The focus of this research is to identify factors affecting failure of crude oil pipelines in Nigeria due to corrosion with analysis of failure data from 2008–2017. Corrosion (internal and external) over total length of available pipelines for each year was analysed to determine the current mean time …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 1–8 Read article
-
Evaluation of Response Characteristics of Distillation Column
Abstract: In this paper mathematical model was developed to monitor, predict and control the effectiveness of the controller designed with the principle of various responses. The result obtain in the investigation demonstrate the usefulness of input, ramp, and impulse response in monitoring, predicting and controlling the separation of the distillate product from the reflux for effective performance evaluation of the distillation column. The model evaluated the impact of feed tray, reboiler …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 32–43 Read article
-
Analysis of Elastic and Elasto-Plastic Behaviour of A588 Structural Steel Beam
Abstract: In the present work, an elastic and elasto-plastic behaviour of ASTM A588 structural beam of I-section has been carried out. The cantilever beam model of I-cross section has been created in the finite element simulation software ABAQUS. In the elastic behaviour study, the model has been simulated in the elastic region. After that, the model has been extended to an elasto- plastic analysis by incorporating the plastic strain in the …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 2, 2020 · pp. 1–16 Read article
-
Application of hybrid RSM-GA technique in predicting optimum process parameters of biodiesel production from Karanja and Mahua oils
Abstract: The current work is focused on the maximization of biodiesel production from Karanja and Mahua oils. The design expert 6.0.8 tool is used for applying the RSM and half fraction with five input process parameters are entered in it. The ranges of all the process parameters are obtained from the literature review. The experiment design matrix is produced to conduct the experiments in order to get maximum biodiesel yield. The …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 1, 2023 · pp. 7–11 Read article
-
Detection of Road Objects and Road Signs from 3D Mobile Mapping System
Abstract: As the number of practical applications of point clouds from a mobile mapping system (MMS) increases, the use of modeled data from MMS has also increased in many fields. However, the data-modeling process is costly. Therefore, in order to make the modeling process efficient, a method of recognizing road objects is needed. Conventional methods cannot recognize objects that include various shapes such as walls and guardrails, or objects that are …
Published in International Journal of Computer Aided Manufacturing · Vol. 3, Issue 1, 2017 · pp. 26–30 Read article
-
Production of Dental Materials by Computer-Aided Manufacturing Technologies
Abstract: The aim of the present paper is to make a review of the modern trends in the development of the technologies for production of dental materials. An understanding of the currently available bonding strategies to CA/CAM materials can help the clinician to select the most indicated system for each category of materials. Three are the main trends in production technologies in dentistry last 30 years: digitalization, simulation and implementation of …
Published in International Journal of Computer Aided Manufacturing · Vol. 3, Issue 1, 2017 · pp. 36–39 Read article
-
Computational Analysis of Shockwave–Boundary Layer Interaction at Hypersonic Speeds
Abstract: Successful plan of present-day supersonic and hypersonic vehicles requires a comprehension of the physical stream field structure of shockwave–boundary-layer interactions (SWBLIs) and productive reproduction techniques for their portrayal. The significant focal point of this paper is two-dimensional (2D) hypersonic SBLI as well as stream portrayal and physical properties around SWBLIs; be that as it may, even in ostensibly 2D/axis-symmetric streams, the mean stream measurements might be 3D.The objective of the …
Published in International Journal of Computer Aided Manufacturing · Vol. 5, Issue 2, 2019 · pp. 1–25 Read article
-
Software Numerical Simulation on Earth Tube Heat Exchanger Where Air as A Flow Medium
Abstract: Renewable energy is free in nature and it must be brought into application. Due to use of air conditioning and its refrigerants global warming is a serious issue. Renewable energy is the main concept of an earth tube heat exchanger, which uses the thermal energy of the ground for cooling and heating of the fluid medium. Here, air is used as fluent working medium. The air cools in summer and …
Published in International Journal of Computer Aided Manufacturing · Vol. 6, Issue 1, 2020 · pp. 19–45 Read article
-
Optimization and Analysis of Pulsation Dampener
Abstract: This paper presents a new method for generating computer-aided models and analysis of pulsation dampeners used in fluid power systems to reduce vibration. Pulsation dampeners are widely used in different energy systems to measure the backlash that is driven by power pumps. The vibrations caused by the power pumps in the water system can be strong enough to cause structural damage to the pipes if the pulsation dampener is not …
Published in International Journal of Computer Aided Manufacturing · Vol. 6, Issue 1, 2020 · pp. 53–56 Read article
-
Structural Analysis of the Ramsbottom Safety Valve using Fusion 360
Abstract: In this paper, a finite element analysis was first used to calculate the static displacements and stresses under the maximum loads in the body of the Ramsbottom Safety Valve, which was then used for point evaluation. Fatigue analysis and longevity were assessed through the use of Fusion 360 software. In recent years, the need to understand the performance of a product over its life cycle has increased drastically. The development …
Published in International Journal of Computer Aided Manufacturing · Vol. 7, Issue 2, 2021 · pp. 30–37 Read article
-
CFD Simulation on Ground Tube Heat Exchanger using Copper and Aluminum as Tube Material
Abstract: Renewable energy is free in nature and it must be brought into application. Due to use of air conditioning and its refrigerants global warming is a serious issue. Renewable energy is the main concept of an earth tube heat exchanger, which uses the thermal energy of the ground for cooling and heating of the fluid medium. Here, air is used as fluent working medium. The air cools in summer and …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 6, Issue 2, 2020 · pp. 49–74 Read article
-
Numerical Analysis of Energy Absorption Ability of Polygonal Tubes under Crushing
Abstract: Honeycomb panels are used mostly in energy absorption application in engineering fields such as aerospace, transportation and packaging, etc. Honeycomb panels have good stiffness and are weight efficient structures. The honeycomb core consists of cellular cells. The core cell’s geometry of honeycomb affects the energy absorption ability. In this study, the different geometries of individual cell are analysed in tube form. Tubes of different geometries like square, pentagon, hexagon, octagon, …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 1, 2021 · pp. 22–30 Read article
-
Dynamic and Fatigue Analysis of Engine Crank Shaft by Using FEM Approach
Abstract: The internal combustion (ICE) engine crankshaft is a high-volume manufacturing component with a complicated shape. This converts the piston's reciprocating displacement into the crank's rotating motion. In this research, an effort is made to investigate how geometry modification might increase the fatigue life of a single-cylinder engine crankshaft. SOLIDWORK software was used to construct the modelling of the original and optimised crankshaft, which was then imported for analysis into ANSYS …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 9, Issue 1, 2023 · pp. 18–36 Read article
-
How to Attain Normalcy in Childbirth?
Abstract: Procreation is nature’s most basic way of creating and sustaining the biosphere. Childbirth, as in animals, is a normal process in human beings too. Too much medicalization of this normal process has forced social and health professionals to rethink as to where things have gone beyond a reasonable limit and what can be done to bring normalcy to the nature’s beautiful event called childbirth. Cannot we help a pregnant woman …
Published in International Journal of Obstetrics, Perinatal and Neonatal Nursing · Vol. 2, Issue 1, 2016 · pp. 11–13 Read article
-
Design of Real-Time Candy Vending Machine Using Verilog HDL
Abstract: This project focuses on the implementation of a real-time candy vending machine using Verilog Hardware Description Language (HDL). The main objective is to design a digital system that simulates the operation of a candy machine, including accepting coin inputs and monitoring the total inserted amount in real time. Verilog HDL is used to model the system’s behavior at the register– transfer level, making it suitable for academic and conceptual understanding …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 12, Issue 1, 2026 · pp. 11–17 Read article
-
Classification of Fetal ECG Arrhythmia by Using Advance Hybrid Deep Learning Technique CNN-LSTM
Abstract: Fetal heart abnormalities, particularly fetal heart arrhythmias, are becoming an increasing concern in maternal healthcare. Early and accurate detection remains challenging due to limitations in conventional diagnostic techniques and inadequate signal processing methods. Existing studies have applied various machine learning and deep learning approaches; however, capturing the complex characteristics of fetal electrocardiogram (ECG) signals remains a significant gap. This study proposes an advanced deep learning-based approach for detecting fetal heart …
Published in International Journal of Cardiovascular Nursing · Vol. 12, Issue 1, 2026 · pp. 27–36 Read article
-
Advanced Magnesium-Based Metallic GlassComposites for Biomedical Implant Applications: AMachine-Learning-Informed Approach
Abstract: Magnesium-based bulk metallic glasses (Mg-BMGs) combine strength, low density, and tunable degradability. Their amorphous matrix has a small plastic process zone. This zone is only about 4 μm wide. A small process zone keeps most glasses brittle. Adding a second phase is the best fix. This chapter extends Mg-BMGs to true composites. We call these Mg-based bulk metallic glass composites, or Mg- BMGCs. The chapter covers matrix engineering and interfacial …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 48–65 Read article
-
Vehicle to Grid and Grid to Vehicle single phase Grid
Abstract: This paper contains the modeling and intelligent control of Vehicle-to-Grid and Grid-to-Vehicle single-phase bidirectional converter. It is suggested to have a hybridized double-loop control architecture including an outer DC-link voltage regulation loop and an inner grid current control loop. A voltage control loop is added to a DC-link voltage adjustment system with fuzzy logic controller (FLC), to adjust dynamic performance under various operating conditions controlled by adaptively regulating the DC-link …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 12, Issue 2, 2026 Read article
-
Heat Generated Simulation with Bacteria and Fungi inCrude Oil Remediation in an Aerated Lagoon
Abstract: Studies on the heat generated by bacteria and fungi in an aerated lagoon were monitored by theapplication of MATLAB computed software simulation. Mathematical models were developed in termsof substrate utilization by microbes and correlated with the Monod’s equation model which revealedthe trend of heat generated at different operating temperature of 15°C, 30°C, 45°C, 60°C, 75°C, 90°C,105°C and 120°C. The heat generated varies with increase in the microbial concentration as favoredby …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 12, Issue 1, 2026 · pp. 27–45 Read article
-
Total Petroleum Hydrocarbon Degradation with the Action of Bio-stimulant using NPK Fertilizer
Abstract: The total petroleum hydrocarbon degradation with the action of bio-stimulant using NPK fertilizer was monitored with respect to different concentration of dosages. The nature of the curve in relationship to the establishment of the equation of the line as well as the square root of the best of each line or curve was considered. The application of this concept enhanced the determination of the kinetic values of each bioreactor process, …
Published in International Journal of Green Chemistry · Vol. 12, Issue 1, 2026 · pp. 26–33 Read article