Search
214 articles for “Steel.”
-
Impact, Flexural, and Hardness Properties of AISI 1018 Mild Steel Butt Joint Welded using Gas Metal Arc Welding (GMAW) under Various Welding Parameters
Abstract: AbstractThe effects of welding parameters such as welding current, voltage, and travel speed on the impact, flexural, and hardness properties of AISI 1018 mild steel using Gas Metal Arc Welding (GMAW) were investigated. In this research, specimen sizes of 500 mm x 10 mm x 10 mm and 5.5 mm x 10 mm x 10 mm were fabricated according to ASTM standards. In addition, a v-groove had been prepared at …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 6–13 Read article
-
Effectiveness of Vegetable oil Based Cutting Fluid (VBCF) with Non-ionic Surfactants in Turning EN8 Steel
Abstract: In the present work, properties of the the non-ionic surfactants have been used to formulate vegetable oil based cutting fluid (VBCF) palm oil for the emulsion as non-conventional lubricant. Tool temperature and surface finish are plays an important indicator of quality in manufacturing industries and thus they are regarded as the most important parameters to be considered. In this present work different machining parameters were taken and their effect on …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 5, Issue 2, 2019 · pp. 21–30 Read article
-
Investigation On Behavior Of Cold Formed Steel In Beam Column Connections
Abstract: Cold form steel structures are used for numerous purposes in construction industry. An attempt has been made in this study to check the behavior of beam column connections by using self-tapered screw in cold form steel section theoretical, experimentally and analytically. Finally, the experimental results are compared with analytical results. This study aims at the following objective by test performed on cold formed steel section to check the behavior connections. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 1, 2016 · pp. 66–70 Read article
-
Microstructure and Mechanical Behavior of Microalloyed Forging Steels
Abstract: The microalloyed (MA) forging steels have been developed over the past several decades and they are gradually employed in the high-performance applications in many structural, automotive, and numerous engineering applications. The principle of microalloying contents in the Fe–C alloy system, thereby preferably combined with different mechanical, heat treatment, and microalloying solubility control the precipitation behaviors that lead to enormous opportunities to develop a new generation of high strength low alloy …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 1–14 Read article
-
Parametric Assessment of Prefabricated Buildings (PEB) and Conventional Steel Bearings
Abstract: Prefabricated buildings are primarily prepared through the process of pre-planning and prefabrication. The advancement of the prefabricated building construction approach implies time constraints, cost efficiencies, improved structural performance, and expanded architectural insights. Prefabricated buildings become an effective replacement for traditional steel buildings in every respect. further results when comparing costs, construction time, quality parameters and architectural perspective. The main objective of the current study is to compare prefabricated steel structures …
Published in International Journal of Structural Engineering and Analysis · Vol. 8, Issue 1, 2022 · pp. 26–33 Read article
-
Design and Comparative Analysis of Pratt Roof Trusses Using Angular and Tubular Steel Sections through Limit State Method
Abstract: A Pratt truss is a type of truss structure which is used in civil engineering to support heavy loads. It is comprised by the diagonal members and vertical members, which transmits the loads efficiently through a combination of tension and compression which is easy to construction and suitable for both short and medium span. But this project work is made to decide to structural performance employing angular and tubular steel …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 2, 2023 · pp. 61–72 Read article
-
Use of Ausforming in Improving Reduced Activation 5%Cr Steels
Abstract: Improvement of reduced activation 5% Cr steels for improved performance of the parts during a thermonuclear reactor, (associated in Nursing enlarged application temperature) for structural materials like 5%Cr steels is crucial. The development of this generation of 5% Cr steels (i.e. EUROFER) is one among the aims of this EURO fusion programme for advanced steels. The goal of this work is to find out the foremost effective thermo-mechanical treatment of …
Published in International Journal of Energetic Materials · Vol. 1, Issue 2, 2015 · pp. 5–6 Read article
-
Corrosion Protection of Rebar steel in Ocean Atmosphere
Abstract: Rebar is an important engineering metal. It is used in construction of housing, bridge and other infrastructures works. It is surround with concrete for strengthen building block components. The concentration of chloride ions in ocean atmosphere is higher so it produces hostile environment for rebar steel. The lots of porosities are available on the outer surface area of concrete so chloride ions enter inside by osmosis or diffusion process. It …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 1–11 Read article
-
Steel in Marine Weather
Abstract: Offshore structures of steel are reviewed after suitable application at onshore. Coat of stitch pad wet weld heat treat is subjected to improve the properties from high strength low alloy steel. Underwater welding with or without environment has modifications from the use of weld heat to heat treat, selection of electrodes containing silicates and polymer agglomerates to induce more heat of weld and penetration. Typical coat crack detect inswing from …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
A Review on Green Inhibitors to Corrosion of Steel
Abstract: Traditions of green corrosion inhibitors are described to elucidate soybean oil derivatives, Spondias cytherea leaves, Rosmarinus officinalis L. leaves, Chrysophyllum albidum; Tridax procumbens L. leaves, roasted coffee, Jatropha curcas leaves, Propolis, Manilkara zapota fruit peel, avocado, Canna indica flower. Green inhibitors are ever praised due to environmentally friendly usage. Industrial feasibility is studied from laboratory simulations. Carbonated drink corrosion of steel is most acceptable to use green inhibitors. Corrosion in …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 12–21 Read article
-
A Review on Cutting Parameter on Micro Drilling Characteristics of Different Steel
Abstract: Related work revealed that a lot of works have been done on the cryogenic turning of various metals. The tool life significantly increases with the introduction of cryogenic and thermal-assisted machining in the turning operations. The reductions in the heat at tool chip interface have significantly affected on the tooled life. Some research gaps in the literature have been found as: Limited research works have been performed on the cryogenic …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 1, 2021 · pp. 31–36 Read article
-
Influence of Recycled Aggregate and Steel Fiber on the Compressive Strength of Concrete: A Comparative Study of NAC and RAC Mixes
Abstract: Abstract This study evaluates the impact of varying proportions of recycled concrete aggregate (RCA) and steel fiber content on the compressive strength of concrete mixes. Five concrete mixes were prepared with different percentages of RCA (0%, 25%, 50%, 75%, and 100%), using a constant water-to-cement ratio (w/c) of 0.55. Additionally, each mix included variations with 1% and 2% steel fiber by volume, corresponding to 78.5 kg/m³ and 157 kg/m³, respectively. …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 11–16 Read article
-
Review of Partial Replacement of Cement with Metakaolin and Utilization of M-Sand, Alongside Addition of Steel Fiber, in the Construction Industry
Abstract: In this contemporary context, demands placed on concrete have escalated significantly. Variousessential properties of concrete such as strength, durability, workability, and expected service liferequire enhancement. This work focuses on investigating the strength properties of concrete throughdifferent substitutions of cement with metakaolin (MK), manufactured sand (M-sand), and steel fiber.Tests were conducted in accordance with Bureau of Indian Standards guidelines to assess thesuitability of MK as a cement replacement. Steel fiber was …
Published in International Journal of Construction Engineering and Planning · Vol. 10, Issue 1, 2024 · pp. 26–30 Read article
-
Utilization of Steel Slag as Course Aggregate
Abstract: Concrete is the third largest material consumed by human being after food and water as per WHO. Concrete plays a vital role in the design and construction of the nation’s infrastructure. Almost three quarters of the volume of concrete is composed of aggregate. These are obtained from natural rocks and river beds, thus degradation them slowly. This issue of environment degradation, and need for aggregates demands for the usage of …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 14–18 Read article
-
A parametric study for the behaviour of steel plate-anchor assembly embedded in concrete under cyclic loading
Abstract: Steel plate-anchor assembly embedded in concrete is a common type of connection system used for connecting structural steel members to concrete members. These assemblies are subjected to different loading cases depending on their use. Since the behaviour of such assemblies is quite complex and depends on a number of factors associated with different components, it was decided to adopt finite-element technique to obtain a reasonably accurate analytical solution for the …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 21–36 Read article
-
SEISMIC ANALYSIS OF G+20 RCC FRAMED STRUCTURE AND STEEL BEAM-CONCRETE COLUMN HYBRID STRUCTURE
Abstract: In the realm of structural engineering, the quest for innovative solutions that harmonizeperformance, efficiency, and sustainability remains an ongoing pursuit. In the dynamic landscape of high-riseconstruction, the pursuit of innovative solutions that combine efficiency, strength, and sustainability has led tothe exploration of hybrid structural systems. One such intriguing approach is the integration of steel beamsand concrete columns, where the unique properties of each material are harnessed to create a cohesive …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 2, 2023 · pp. 47–60 Read article
-
ASSESSMENT OF FOUNDATION SIZE AND REINFORCEMENT USED FOR FOUNDATION BASE OF PIER FOR STEEL GIRDER RAILWAY BRIDGE.
Abstract: The analysis of foundation size and reinforcement is conducted with respect to the overall load exerted on the foundation base. This includes considering the load imposed by trains, the weight of the girder, and the pier. To ensure the structural integrity and stability of the foundation base, M25 grade concrete and Fe 500 grade steel are utilized. In order to counteract bending forces, 20 φ diameter steel bars are incorporated …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 9, Issue 1, 2023 · pp. 13–18 Read article
-
Corrosion and Corrosion Protection of Carbon Steel
Abstract: Carbon steel is a very important metal for petroleum industries. Petroleum refineries are used bulk amount of carbon steel for purification of crude oil. Some amount of carbon dioxide and sulphur dioxide present in crude oil. Both gases are acidic in nature so they generate hostile medium for metal. These gases convert into carbonic and sulphuric acid and develop electrochemical cell on the surface of metal and aggravate corrosion reaction. …
Published in International Journal of Energetic Materials · Vol. 9, Issue 1, 2023 · pp. 28–35 Read article
-
Analysis of Mechanical and Corrosion Properties of AISI50110 (EN31) Steel With and Without Heat Treatment
Abstract: The mechanical properties of steel decide its applicability for a particular condition. Heat treatment processes are commonly used to enhance the required properties of steel. The material was machined to ASTM standards and then different tests like microstructure analysis, hardness test, impact test, etc. were carried out after the heat treatment processes. All the tests were carried out in the mechanical workshops and laboratories under the supervision of their respective …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 24–41 Read article
-
Growth of CNT in a Stainless Steel Surface by Using Gold Nanoparticle as a Catalyst for Corrosion Less Implants
Abstract: Now a day’s maximum implant are failure due to corrosion or infection. And the infection is happened due to growth of Escheria coli, steptococus, miccrobacterium tuberculosis like bacteria. Carbon nanotubes based stainless steel implant may be the promising outcome for corrosion. Carbon nano tubes when irradiate with NIR will heat up to 70oC and it has been demonstrate that folic acid adsorbed on carbon nano tubes allow specific binding to …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 2, 2016 · pp. 1–5 Read article