Search
539 articles for “composition”
-
Thermal and structural properties of surface treated ragweed fiber reinforced biodegradable polylactic acid biocomposites
Abstract: Natural fiber-reinforced composites (NFRC) are becoming more popular as technological advance recognizes the need for eco-friendly materials. This work presents Giant ragweed (Ambrosia trifida) as a new composite reinforcement material into polylactic acid (PLA) matrix to form novel natural fiber-reinforced composites. Different types of retting techniques are utilized, and hydrogen peroxide retting is proven to provide the most optimized properties. The fibers are taken through subsequent extraction and grinding processes. …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 13–31 Read article
-
Implications of ceramic – metal matrix compose
Abstract: AbstractThis article summarizes some formatives over WC-metal matrix composite surfacing on hard as well soft alloys. Composite surface has coated by laser, plasma and electroplating. WC-Ni composite has prepared by plasma transferred arc welding on steel surface. Thickness achieved from several mm on small parts to thin deposits on large surfaces. Cu-substrate accorded WC-Ni laser cladded deposition. Laser deposition of WC-Ni-NiCr on stainless has increased wear and erosion under flowing …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 31–37 Read article
-
Synthesis and Characterization of Poly(vinylpyrrolidone) / Starch / Dimethylacrylamide Hydrogel by Gamma Radiation and Its Application in Basic Fuchsin and Methyl Orange Removal
Abstract: Gamma radiation was used to create a number of PVP/Starch/Dimethylacrylamide (PSD) based hydrogels. Investigated were the effects of several parameters, such as radiation dose, material composition, and pH, on the characteristics of hydrogels, such as gel content and swelling behavior. Radiation doses ranged from 10 to 25 kGy, and 10 kGy was determined to be the ideal dose. Investigations on the impact of dimethylacrylamide (DMA) composition on swelling were investigated. …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 1–20 Read article
-
A review on Surface engineering and its methods.
Abstract: Surface engineering is the process of creating a surface/substrate composite system that achieves performance that neither the surface composition nor the substrate alone can achieve. This is achieved by modifying the substrate surface to improve beauty, provide environmental protection, or increase mechanical or physical performance.. Surface engineering plays a significant role in tribology and modifies or coats a component's surface to improve its properties. This article logically analyses a wide …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 20–23 Read article
-
Temperature-Dependent Acoustic and Thermodynamic Investigation of Molecular Interactions in the 1-Propanol–n-Hexane Binary Mixture
Abstract: The present study investigates the molecular interactions and thermophysical behavior of the binary mixture comprising 1-propanol and n-hexane over the temperature range of 288.15–318.15K. The experimental determination of density (ρ), viscosity (η), and ultrasonic velocity (u) was carried out over the entire composition range, and the measured data were utilized to evaluate several acoustical and thermodynamic parameters, including the Van der Waals constant, relaxation strength, acoustic impedance, Rao’s constant, Wada’s …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 12, Issue 2, 2026 · pp. 16–33 Read article
-
A look at friction stir processing for making better surface properties
Abstract: Abstract Friction stir processing is a surface properties modification method consequential from friction stir welding. The process uses a non-consumable tool made up of tool steel material. The tool pin and shoulder plunged in the surface of the base material plates and it mover along the predetermined path. The frictional heat stimulates the plastic deformation during the process & enhances the dynamic recrystallization. The process represents an advanced approach that …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 41–47 Read article
-
Advanced Materials and Protective Coatings for Enhanced Durability in Gas Turbine Engines
Abstract: Abstract Gas turbines are critical in modern power generation and propulsion systems, where high thermal efficiency, performance, and durability are essential. Operating at extreme temperatures and in aggressive chemical environments places significant stress on hot-section components, such as turbine blades, vanes, and combustor liners. To meet these demands, advanced high-temperature materials and protective coatings have been developed to ensure structural integrity, reduce maintenance, and improve operational lifespan. Nickel-based superalloys remain …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 1, 2025 · pp. 1–6 Read article
-
Tailoring Electrolytic Deposition of Zn-Ni Alloys for Superior Corrosion Resistance in Harsh Environments
Abstract: Since Zn–Ni alloy coatings are more resistant to corrosion than pure zinc coatings, they are being researched extensively. In this study, Zn–Ni alloy coatings electrolytically deposited from an acidic sulfate bath are investigated. The study looks into how the microstructure, phase composition, and corrosion resistance of the coatings are affected by deposition factors like pH, current density, and electrolyte composition. X-ray diffraction (XRD), potentiodynamic polarization, and scanning electron microscopy (SEM) …
Published in International Journal of Chemical Engineering and Processing · Vol. 11, Issue 1, 2025 Read article
-
Influence of Surface Treatments on the Adhesion of Plant Fibers to Epoxy Resin
Abstract: Because of their primary benefits, moderate strength and stiffness, low cost, and the fact that they are a renewable, biodegradable, and environmentally safe material, natural fibers are seen to have potential use as reinforcing agents in polymer composite materials. Since they are inherently hydrophilic, moisture can easily build up on them, weakening or plasticizing the fibers’ adhesion to the surrounding matrix and affecting the performance of composite materials used in …
Published in International Journal of Agrochemistry · Vol. 11, Issue 1, 2025 · pp. 12–24 Read article
-
Experimental Study on Effects of Moisture and Clay Content on the Properties of Moulding Sand
Abstract: Sand casting, a time- honoured technique for casting both ferrous and nonferrous metals, remains widely utilized due to its cost-effectiveness, material abundance, and reusability, particularly with sand as a primary resource. This study delves into the intricate dynamics of sand casting, examining its crucial parameters through meticulous analysis of existing research. The investigation focuses on the influence of factors such as sand composition, moisture levels, clay content, and binder type …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 10, Issue 1, 2024 · pp. 16–25 Read article
-
Development of Plant Based Iron Rich Food Products and Their Efficacy Evaluation Using Food Based Approach
Abstract: Iron deficiency anemia (IDA) is the most wide spread nutritional problem and affects over 2 billion people. The main reason for IDA has been determined to be inadequate intake of iron and low bioavailability (1-6%) of dietary iron from plant foods. Food based approaches to addressing IDA in India are being promoted, but information on to what extent food combination would improve the bioavailability of iron is fragmentary. Vitamin C …
Published in International Journal of Agrochemistry · Vol. 8, Issue 1, 2022 · pp. 23–42 Read article
-
Fast pyrolysis of Kaner (Thevetia peruviana) Seed to Fuel and Chemicals
Abstract: Bio-energy is now considered as having the potential to provide the major part of the projected renewable energy provisions of the future. Currently non-edible seed biomass has been considered as one of the major bio energy resource. Among the different non-edible seeds such as Jatropha, Neem, Karanja, Safflower, Pomegranate, Cherry, Mahua, Cotton etc., Kaner (Thevetia Peruviana) seed plant is a very widely available even in the tropical climate. In this …
Published in International Journal of Analytical and Applied Chemistry · Vol. 1, Issue 1, 2015 · pp. 7–20 Read article
-
Recovery of Succinic acid by Reactive Extraction using Tri-n-octylamine in 1-Decanol: Equilibrium Optimization using Response Surface Method and Kinetic studies
Abstract: Reactive extraction is a promising technique for the recovery of organic acids from aqueous streams. Succinic acid, is a white, odorless solid dicarboxylic acid, and is a precursor for some specialized polyesters. Present paper presents an optimization study of reactive extraction of succinic acid equilibrium studies from aqueous solutions using Tri-n-octylamine in 1-Decanol using response surface methodology including reaction kinetics in a stirred cell. Extraction efficiency (Y), a response function …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 2, 2016 · pp. 1–14 Read article
-
Rheological Study of Waste Polyethylene Terephthalate with Bitumen Mix in Pavement Construction
Abstract: Plastic bags which are composed of polyethylene terephthalate (PET) is commonly used as for soft drink, water bottles and many other applications. However, disposal of this waste PET in large quantities constitutes an environmental problem, as it is considered as non-biodegradable materials. This study investigated rheological study of waste PET to be mixed with bitumen use as a raw material for pavement construction. The effect of temperature was varied from …
Published in International Journal of Chemical Separation Technology · Vol. 4, Issue 1, 2018 · pp. 36–48 Read article
-
Study on Mechanical and Physical Properties of Wood-Plastic Nanocomposites after Fiber Surface Treatment
Abstract: Numerous composites based on high-density polyethylene (HDPE), wood flour (WF), and nanoclay (Cloisite 30B) were prepared by melt compounding followed by injection mold. This paper aims to evaluate the feasibility of using HDPE and underutilized WF as a material for the development of woodplastic composites, as well as the strengthening effect of nanoclay on them. To develop the poor interfacial interaction between the hydrophilic WF and hydrophobic HDPE matrix, as …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 43–53 Read article
-
Stability Analysis of Mahua Seed and Waste Polystyrene Co-pyrolytic Oil
Abstract: Biomass pyrolytic oil is a complex mixture of organic compounds and obtained in a non-equilibrium state. Hence, the physical properties of bio-oil such as calorific value, viscosity, pH, density, flow ability and chemical compositions vary during storage. In this study, co-pyrolysis of Mahua seed was performed with waste polystyrene and studied the fuel properties and composition. The co-pyrolytic oil was produced at 2:1 ratio of seed to waste polystyrene using …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
Potential of Natural Fibres for Strengthening Existing Structures – A Review
Abstract: To rehabilitate the deficiencies in the existing structures, synthetic/artificial fiber reinforced polymer composites have been considered as an effective external strengthening material for construction industries since a long period, due to their outstanding performances like high strength-to-weight ratio, lightness, and resistance to corrosion. But few of their drawbacks in terms of high cost, environmental issues etc., they have been triggered the introduction and development of natural fibers. Natural fibres are …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 2, 2018 · pp. 38–46 Read article
-
Simulation of delay variation at uncontrolled intersections for mixed traffic conditions
Abstract: Mixed traffic is composed of different vehicle types with varying geometric and acceleration characteristics. Capacity and delay are the two parameters mainly used to measure the effectiveness of uncontrolled intersections. The variation in the lengths and widths of a vehicle type also has an effect on the capacity and delay. Three intersections and three vehicle types are considered for the study. Also, different vehicle compositions scenarios (C1 to C11) were …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 1, 2018 · pp. 1–10 Read article
-
Use of Nano-additives in Rubber Compounding: A Review
Abstract: Rubber nanocomposites nowadays find an important position both in academic and industrial point of view and extensive research work is under way in this area. Due to their ever-growing significance of nano-additives, thorough investigation becomes necessary especially for their applications in various industries. Due to enhanced surface area and high aspect ratio of nanomaterials results in superior matrix/filler interaction and lead to superior and versatile properties in wide range of …
Published in International Journal of Energetic Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
Thermal Material Used in Aerospace for Protection
Abstract: Ablative nanocomposites were set up by fusing multiwall carbon nanotubes (MWCNT) into phenolic gum and after that impregnating them into rayon-based carbon texture. MWCNT were mixed into phenolic gum at 0.5, 1, and 2 wt% loadings utilizing a mix of sonication and high shear blending to guarantee uniform scattering of MWCNT. The composite test examples were tried by utilizing an oxyacetylene test bed (OTB) applying a warmth flux of 1000 …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 2, 2016 · pp. 1–2 Read article