Search
298 articles for “rat model”
-
Modeling and Simulation of Double-Pass Flat Plate Solar Air Heater Without Porous Media
Abstract: The double-pass solar collector with porous media in the lower channel provides a higher outlet temperature compared to the conventional double-pass collector without porous media. Therefore, the thermal efficiency of the solar collector is higher. A theoretical model has been developed for the double-pass solar collector. The porous media has been inserted to increase heat transfer, area density and the total heat transfer rate. Comparisons of the theoretical and the …
Published in International Journal of Computer Aided Manufacturing · Vol. 3, Issue 2, 2017 · pp. 1–10 Read article
-
An Analytical Model to Predict a Real Time Temperature Variation During Laser Treatment of Cancer Tissues
Abstract: This work presents an analytical solution to provide a real time variation in increase of temperature during laser-treatment of cancer tissues. Energy conservation equation is used to model the respective laser treatment process considering application of the laser and related heat loss as heat source terms. The present prediction is validated first with existing literature and extended the same to predict the effect of different process variables, such as laser …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 11, Issue 1, 2025 · pp. 1–8 Read article
-
Delineate Catchment Areas of Vindhyachal Region Using Geospatial Techniques
Abstract: In this paper we used an integrated suite of raster and vector geospatial datasets to delineate and characterize watersheds. The geospatial datasets used to delineate and characterize watersheds with the help of Arc Hydro tools of Arc GIS software. We have performed drainage analysis on a terrain model for Vindhiyanchal Region. With the availability of digital elevation models (DEM) and geographic information system (GIS) tools, watershed properties can be extracted …
Published in International Journal of Water Resources Engineering · Vol. 1, Issue 1, 2015 · pp. 1–9 Read article
-
Triple Slot Patch Antenna Employing Electromagnetic Band Gap Structures
Abstract: A triple-slot patch antenna integrated with Electromagnetic Band Gap (Mushroom Electromagnetic Band Gap, Electrical Electromagnetic Band Gap) structures is designed to enhance wireless communication performance for IoT applications. It combines a compact triple-slot patch design with periodic EBG unit cells that suppress surface waves and improve gain and directivity. The antenna design is simulated at 5.5 GHz using ANSYS Electronic Desktop to evaluate its overall performance. ANSYS Electronic Desktop is …
Published in International Journal of Microwave Engineering and Technology · Vol. 12, Issue 1, 2026 · pp. 40–52 Read article
-
Hydrogenation of dimethyl-nitrobenzene to dimethyl-aniline in a three-phase Reactor
Abstract: The liquid-phase catalytic hydrogenation of dimethyl-nitrobenzene (DN) to Dimethyl-aniline (DA) was carried out in ethanol using 5% Pd/C as a catalyst. The effects of hydrogen partial pressure (400–1000 kPa), reaction temperature (343–403 ), catalyst loading (5–15 g/lit), speed of stirring range (200-800 rpm) and dimethyl-nitrobenzene concentration (0.12–0.75 mol/lit) on the hydrogenation of dimethyl-nitrobenzene and the yield of Dimethyl-aniline have been studied. Dimethyl-aniline was the only reaction product, generated through the …
Published in International Journal of Chemical Separation Technology · Vol. 3, Issue 2, 2017 · pp. 1–13 Read article
-
Evaluation of Michaelis-Menten Constants of TPH Degradation on Clay Soil
Abstract: The degradation of Total Petroleum Hydrocarbons (TPH) in petroleum-contaminated clay soil remains a major environmental concern, particularly in regions with limited remediation options. This study investigates the enzymatic kinetics of TPH biodegradation using Michaelis-Menten modeling in the presence of Bryophyllum pinnatum leaf extracts as biostimulants. Fourteen bioreactors containing 2000g of contaminated clay soil were prepared with 100ml of crude oil and treated with varying doses (100ml, 200ml, and 300ml) of …
Published in International Journal of Chemical Engineering and Processing · Vol. 11, Issue 2, 2025 · pp. 6–12 Read article
-
Break Extension and Possibility of Debonding in Encapsulation-Based Self-Healing Materials
Abstract: The breakage of containers upon split proliferation is vital for accomplishing split mending in embodiment based self-recuperating materials. A mesomechanical model was produced in this review to reenact the procedure of split proliferation in a framework and the capability of debonding. The model utilized the augmented limited component technique (XFEM) consolidated with a firm zone demonstrate (CZM) in a two-dimensional (2D) setup. The arrangement comprised of a vast grid with …
Published in International Journal of Energetic Materials · Vol. 3, Issue 1, 2017 · pp. 1–4 Read article
-
Circular Economy for the Solar Industry
Abstract: The term “circular economy” refers to a model of production and consumption that was first introduced in the late 1990s. This model encourages increasing amounts of reusing, refurbishing, repairing, and recycling. Circular economy (CE) has developed over time and is currently being utilized in a wide variety of fields and countries. Solar panels are being manufactured at an increasing rate, and the percentage of people using solar energy is also …
Published in International Journal of Urban Design · Vol. 5, Issue 2, 2022 · pp. 55–59 Read article
-
Modeling, Analysis and Vibrational Behaviour of A Steam Turbine Blade
Abstract: In this research work, the 2nd LP stage of 250MW steam turbine that having 102 blades is considered and blade geometry for various cross-sections had developed with inputs given as co-ordinates which is from blade root to tip of the portion by using UNIGRAPHICS. In order to achieve its desired performance for a steam turbine blade, the blade material has to withstand ambient conditions such as loading, temperatures, pressures and, …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 27–45 Read article
-
Second-Life Battery Applications and Recycling Technologies of EV in India: A Comprehensive Review
Abstract: Abstract The rapid uptake of electric vehicles (EVs) worldwide is creating a new challenge of end-of-life (EoL) lithium-ion batteries (LIBs). As EV penetration accelerates under national initiatives such as the National Electric Mobility Mission Plan and Faster Adoption and Manufacturing of Electric Vehicles (FAME), the country faces an emerging challenge of managing end-of-life batteries. This paper examines technical pathways for second-life reuse of EV batteries (e.g. stationary energy storage, grid …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 1, 2026 · pp. 15–24 Read article
-
Steepening Pit Walls- Geotechnical and Economic Implications
Abstract: Current approach to pit-wall analysis tends to separate designs into distinct categories. The first consideration involves analysis of slope in which discontinuities actively participate in the failure mobilization. The second involves design analysis of non-structural controls which could results in a wide range of failure mechanisms. The third and the least sought for approach is the economic assessment of the slope design which could render optimized pit slope and the …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 1, 2021 · pp. 45–57 Read article
-
Wireless Network Model: From Analog to Digital
Abstract: The directions to propose new frontiers in Wireless Network (WN) are designed in this paper. The methodologies are discussed by its scientific development. The flow to research on wireless security and efficiency are presented in this paper. The performance analysis is referred as the practical WN protocol. The high data rate has been increasing since the initiation of WN. The nodes, wireless and channels are the key terms over the …
Published in International Journal of Digital Communication and Analog Signals · Vol. 4, Issue 2, 2018 · pp. 29–38 Read article
-
Thermal Fluent Analysis and Simulation on an exhaust Gas of A TEG Model
Abstract: In the current situation, energy is an essential piece of advancement in climate. As the law of conservation says of “Energy can neither be created nor can be destroyed, it can only be transformed from one form to another”. Sadly any energy strategy that produces enhancements in the present moment is regularly one that demolishes the climate over the long haul. It is a well known fact that no outstanding …
Published in International Journal of Computer Aided Manufacturing · Vol. 6, Issue 2, 2020 · pp. 57–80 Read article
-
Anti-anxiety Evaluation of Hydroalcoholic Root Extract of Lagerstroemia speciosa in Swiss Albino Rats
Abstract: After going through numerous pharmaceutical databases for reviewing the present status regarding the exploration of anti-anxiety potentials of root hydroalcoholic extract of Lagerstroemia speciosa (Family: Lythraceae), no such reports have been found so far. Therefore, the necessity of anti-anxiety exploration was taken into account for investigating the above through the EPM model. The L. speciosa root hydroalcoholic extract demonstrated an excellent reduction of anxiety in the experimental animals. This exploration …
Published in International Journal of Animal Biotechnology and Applications · Vol. 6, Issue 1, 2020 · pp. 6–9 Read article
-
Free Vibration Analysis of Laminated Composite Plate with Various Boundary Condition Using FEM
Abstract: The vibration analysis of laminated composite plates is analyzed using finite element method. A suitable finite element model is proposed and developed based on first order shear deformation theory using ANSYS parametric design language (APDL) code. The model has been developed using an appropriate eight node isoparametric element (SHELL281) from the ANSYS element library. In this paper Numerical results have been computed for the effect of material properties, thickness ratio …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
Applications of Sesame Residues as Sorbents for Oil Removal from Produced Water
Abstract: Large amounts of produced water are produced in tandem with the production of crude oil. Both dissolved and dispersed oil are present in produced water, which can contaminate the environment and pose health risks to people. In this study, the oil component, cadmium, and lead ions were extracted from the generated water using sesame residues and agricultural wastes. The sesame residues were dried, size-reduced, and ground. Standard techniques were used …
Published in International Journal of Agrochemistry · Vol. 11, Issue 1, 2025 · pp. 5–16 Read article
-
Antenna and Beam-Control Optimization of RIS-Assisted 6G Links: Phase Resolution, Directivity and Energy Efficiency
Abstract: This paper presents an antenna-oriented investigation of reconfigurable intelligent surface (RIS)-assisted sixth- generation (6G) wireless links, emphasizing practical design factors beyond conventional RIS versus non-RIS bit-error-rate comparisons. Four parameters are evaluated: phase-shifter resolution, reflected-beam directivity, aperture-dependent spectral efficiency, and controller-aware energy efficiency. A Rayleigh-fading binary phase-shift keying (BPSK) link is used for reliability analysis, while the RIS is modeled as a uniformly spaced reflective aperture through its array factor. The …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 12, Issue 2, 2026 Read article
-
Understanding and Controlling Metal Pad Roll Instability in High-Capacity Liquid Metal Battery Systems
Abstract: The present study delves into the roll instability of metal pads within cylindrical liquid metal battery cells, focusing on the characteristics, control, and modeling of the instability within an energetic materials context. Explicit formulas are derived that offer theoretical benchmarks for magnetohydrodynamic solvers OpenFOAM and SFEMaNS, revealing an excellent alignment with experimental observations on gravity wave damping rates in multilayered liquid metal battery systems. Instability thresholds are analyzed for metal …
Published in International Journal of Energetic Materials · Vol. 10, Issue 2, 2024 · pp. 12–16 Read article
-
Numerical Analysis of Flow Characterization in a Continuous Crystallizer
Abstract: In this work, hydrodynamics in a draft tube continuous crystallizer is analyzed computationally through Ansys CFD to crystallization phenomena. Hindrance to fluid mixing and particle suspension due to vortexing can be overcome by providing baffles. A draft tube ensures that it directs the flow in vertical direction ensuring good axial blending. Here CFD simulations are performed using multiple reference frame (MRF) with sliding mesh approach in transient condition for flow …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 2, 2016 · pp. 33–43 Read article
-
The Biomechanical Impact of Slipper Sole Compliance on Lumbar Spine Load: A Quantitative Analysis of Indoor Footwear Ergonomics
Abstract: Abstract The global shift toward remote work has significantly increased the duration of indoor footwear usage, yet the ergonomic standards for slippers remain critically under-researched compared to athletic or industrial footwear. While "high-compliance" or soft slippers are traditionally marketed for immediate comfort, excessive mechanical softness may lead to foot instability, altered gait kinetics, and subsequent compensatory stress on the lumbar spine. This study aims to quantify the correlation between varying …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 1, 2026 · pp. 30–35 Read article