Search
213 articles for “Interface”
-
Smart Electric Energy Meter: Need of Every State Electricity’s Boards in India
Abstract: The energy meter is a device which is used to measure the electricity consumptions in the home appliances. The smart energy meters are the future energy meters that will helps us to managing are energy use. This basically means that we use electricity smartly, no extra wastage of electric energy by the use these type of smart energy meters. This will increase the living standards of electricity energy loving peoples. …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 7, Issue 1, 2021 · pp. 12–16 Read article
-
A Review on Nanobubbles
Abstract: Nanotechnology is an advancing field of research, there are many innovations happening in the field of nanotechnology terrain. There are investigation needs for sustainable generation procedures, stability and understanding the nanobubbles interfacial properties and structures. The author concluded that a decline in pressure makes the super-saturated liquid suffers cavitation and nanobubbles were generated. Keywords: liquid, nanobubbles, pressure, supersaturated
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 1, 2018 · pp. 1–4 Read article
-
High-k and Low-k Gate Dielectric Stacking for Low Voltage Organic Thin Film Transistors
Abstract: Electrical performance parameters of Organic thin film transistor (OTFT) are closely related to the interface characteristics of gate dielectric and organic semiconductor film. Henceforth, it becomes important to study the effect of gate dielectric stacking on device performance of OTFTs. In this paper, we demonstrate the stacking of high-k and low-k gate dielectric based Single and Dual gate OTFTs. The structural effect of Organic thin film transistors is methodically explored …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Mesh to Shrink in Nano Fabricated Compose
Abstract: This article is study about shrink of polymer originated composes. Aim has been inclusive from nano- based fillers on hybridized consequence from polymeric effects. Otherwise, descriptive issues have ever arose to link accession to repair dental simulated perversions. Nanotechnology in material formulation has been production of functional structures in range of 0.1 to 100 nm. Advantages of these composites have inherent shrinkage of cure mode in accordance to monomers said …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 2, 2021 · pp. 1–12 Read article
-
EXPERIMENTATION OF A HIGH STEP-UP DC-DC CONVERTER FOR RENEWABLE ENERGY
Abstract: In this article, the experimentation of a high step- up dc-dc converter are discussed and put forward power management of different types of renewable energy sources whose voltages and currents are connected by the maximum power point tracking (MPPT) controller. The inductor motor was interfaced at the load whose speed was measured and shown in the form of waveforms. This high step-up dc-dc converter has reliability operate instantaneous power generation …
Published in International Journal of Energetic Materials · Vol. 6, Issue 1, 2020 · pp. 33–37 Read article
-
Advancement of Nanotechnology in Batteries
Abstract: As energy source used by most devices such as smart phones, cameras or computers are Lithium batteries, they are becoming the indistinguishable feature of everyday modern civilization. The higher power efficiency was most appealing attribute when opposed to certain redox power devices. It gives rise for significant concern well into the production of hybrid lithium ion batteries for electric automobiles. At higher density lithium constitutes its ideal anode element in …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 18–24 Read article
-
Effect of impurity metal (Fe, Co, Ni) on WSex as good hydrogen evolution catalyst
Abstract: Transition metal chalcogenides are recognized as a category of very promising non-expensive and earth-abundant catalysts for Hydrogen evolution reaction (HER) catalysts. Many literature reports appeared recently on metal selenides due to excellent phyco-chemical properties and for HER, this mini review attempt to give some insight on effect of Fe, Co, Ni to WSex toward efficiency of HER. From the literature report showed that presence of impurities activity with WSex following …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 31–36 Read article
-
Spin-strain-electronics to Convert Electron Energy
Abstract: Spintronic information technology has been reviewed in this article to deliver, store, and process data. Ordered ferromagnetic dopant atom/molecule has induced to accuse filter out electrons based on the spin in place of charge thereby heating effect has reduced. Fabrication of magnetic nanomaterial to sandwich non-magnetic nano-matter has been studied for fast information accession as of the intrinsic spin degree of freedom from spin-valves. The filter has been selective to …
Published in International Journal of Energetic Materials · Vol. 7, Issue 1, 2021 · pp. 13–21 Read article
-
Corrosion Protection of Rebar steel in Ocean Atmosphere
Abstract: Rebar is an important engineering metal. It is used in construction of housing, bridge and other infrastructures works. It is surround with concrete for strengthen building block components. The concentration of chloride ions in ocean atmosphere is higher so it produces hostile environment for rebar steel. The lots of porosities are available on the outer surface area of concrete so chloride ions enter inside by osmosis or diffusion process. It …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 1–11 Read article
-
Optimization Process Parameters of Manganese Phosphate coating developed on En-19 Steels by Statistical Design of Experiment
Abstract: Phosphating is a chemical conversion process in which constituents of a metal surface with a view to produce thin adherent protective coating of insoluble crystalline phosphate by reaction with phosphoric acid solution. This conversion coating should have strong interfacial adhesion and porous enough. The growth of phosphate coating is influenced by method of cleaning of metal surface to be treated before treatment, use of surface activating rinses and acid or …
Published in International Journal of Metallurgy and Alloys · Vol. 2, Issue 2, 2016 · pp. 6–12 Read article
-
DIFFERENT METHODOLOGIES USED FOR PERFORMANCE ANALYSIS OF ORGANIC LIGHT EMITTING DIODE
Abstract: Organic Light Emitting Diode (OLED) is a Solid state lighting devices, the charge transporters must be infused from the anode and cathode yet the execution, lifetime, effectiveness and solidness of these devices are normally administered by the correct thickness of the material layers and terminal/organic interfaces at the anode contacts. This study we exhibit the approach using different thickness and doping of the material in Organic Light Emitting Diode. We …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 20–25 Read article
-
Study the Corrosive Effect of Greenhouse Gases on Metallic and Non-metallic Materials
Abstract: Carbon dioxide is a major corrosive pollutant for building materials. It enters inside materials by diffusion or osmosis process and in presence of moisture it produces H2CO3 which decrease the pH value and accelerates chemical and electrochemical reaction with building materials. The carbonation reaction produces deterioration inside and outside of building materials. It produces corrosion reaction with metallic bar and disbanding with concrete. CO2 reacts with Ca (OH)2 and Mg(OH)2 …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 17–28 Read article
-
Nanocoating and Electrospray Techniques Use to Mitigation Corrosion Sculptures
Abstract: The most sculptures of the world are created by the brass, bronze, iron, silver, gold and metalloid. They come in contact of corrosive pollutants to produce chemical, electrochemical and biochemical reactions and develop various form of corrosion like uniform corrosion, galvanic corrosion, pitting corrosion, stress corrosion and crevice corrosion. The corrosive gases CO2, NO2 and SO2 concentrations increase in atmosphere rapidly after industrialization. The major contributors of these gases are …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 1–11 Read article
-
STUDY OF NANOFLUIDS AND THEIR APPLICATION IN HEAT TRANSFER
Abstract: Heat transfer enhancement has always been the area of improvement. A large amount of research is going by changing the design, shape and size of the devices which requires high quality materials. Nano-fluids can serve this purpose very correctly, because of their high heat transfer capability. Nano-fluids have higher thermal conductivity and higher surface area to volume ratio which helps in increasing the heat transfer. Nano-fluid thermal conductivity models are …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 1, 2017 · pp. 22–27 Read article
-
An Investigation of Physico-mechanical Characterizations of Recycled Cellulose Fiber and Glass Fiber-polypropylene Hybrid Composite
Abstract: In the field of marine engineering design, polymeric composites reinforced with natural fibers are extensively used. The results of this study demonstrate that these properties can be enhanced by adding glass fiber (GF) to recycled cellulose fiber (rCF) plastic composites. The performance of rCF and rCF/GF hybrid polypropylene (PP) composites is being studied in the current experimental effort. On the tensile behavior and impact strength of composites containing 30 wt% …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 1–10 Read article
-
Effect of Nanoclay on the Performance of Calotopis Gigantea Fiber Reinforced Thermoplastic Composites at Distinct Temperature
Abstract: Polymer-based nanocomposite is a developing subject that attracts many researchers due to its special qualities and versatility. Because the specific surface areas of nanofillers in nanocomposites are so high, it is much simpler to produce mechanical properties at the interface. Furthermore, a favorable interaction between the nanofillers and polymer matrix may manifest itself even at comparatively lower percentages of loading nanofillers. Thus, a smart, adaptive polymer nanocomposite material with the …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Thermal and structural properties of surface treated ragweed fiber reinforced biodegradable polylactic acid biocomposites
Abstract: Natural fiber-reinforced composites (NFRC) are becoming more popular as technological advance recognizes the need for eco-friendly materials. This work presents Giant ragweed (Ambrosia trifida) as a new composite reinforcement material into polylactic acid (PLA) matrix to form novel natural fiber-reinforced composites. Different types of retting techniques are utilized, and hydrogen peroxide retting is proven to provide the most optimized properties. The fibers are taken through subsequent extraction and grinding processes. …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 13–31 Read article
-
Nanocomposites: The Fusion of Nanotechnology and Composite Materials
Abstract: Nanocomposites, resulting from the integration of nanotechnology and composite materials, have emerged as a cutting-edge class of materials with exceptional properties and multifunctional capabilities. This article presents a concise overview of the principles, fabrication methods, and diverseapplications of nanocomposites, highlighting their profound impact on numerous industries. By harnessing the power of nanotechnology, nanocomposites offer precise control over material structure and properties at the nanoscale. Through the incorporation of nanoscale reinforcements, …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 43–50 Read article
-
Assessment of Polymer Nanocomposite for Packaging Uses and Concerns about Environmental and Health Effects
Abstract: A nanocomposite material is composed of several phases with at least one, two, or three dimensions in the nanoscale range. When material dimensions are lowered to the nanoscale, phase interfaces are created, and they are essential for enhancing the material's characteristics. The surface area to volume ratio of the reinforced material used to create nanocomposites has a direct bearing on how structure and property relate to one another. Due to …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 10–36 Read article
-
Experimental evaluation of dc Conductivity of Rice Husk Reinforced Polypropylene Composites with addition of cenosphere
Abstract: Insulating materials are used in electrical power circuits to prevent leakages of current. Main objective of this study is to evaluate the dc conductivity of rice husk filled polypropylene composites with and without cenosphere. The conductivity at room temperature was found to decreases from 2.64e-13 to 9.371e-14 S cm-1 with the addition of cenosphere. Dense packing of the material, collapse of pores and decreases in air gap between the rice …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 20–27 Read article