All articles
112 articles
-
Investigation of Mass Transfer Coefficient and Gas Hold Up and Bubble Size Distribution in Novel Design of Stirred Tank Reactor
Abstract: Stirred tanks are commonly used in chemical industries for reaction and separation. Large-scale reactors include many impellers to improve mixing performance. Agitator plays an important role during the gas-liquid contact in two phase flow. And it is very necessary to know for the understanding of any gas-liquid system. So, in this study my motto is to study which parameters affects in the mixing of gas inside the liquid. The parameters …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 2, 2022 · pp. 5–12 Read article
-
Oxidative Desulfurization of Petroleum
Abstract: One of the most successful desulfurization procedures for the creation of ultra-low sulphur import fuels is oxidative desulfurization, which converts aromatic sulfur-containing molecules into sulfone counterparts before being extracted. Oxidative desulfurization processes using graphene oxide are of great interest for fuel sulfur removal. Its technique of desulfurization in reactions catalyzed was thoroughly detailed in this review, along with graphene’s function as a supported catalyst, the findings of research on oxidative …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 2, 2022 · pp. 1–4 Read article
-
Mechanisms for Biological Energy Transduction
Abstract: One of the most intriguing aspects of plant metabolism is energy transduction, and a significant amount of study has gone into understanding the process by which the different activities operate. When light energy is employed in the chloroplast to create Adenosine triphosphate (ATP) from Adenosine diphosphate (ADP), transduction is taking place. This is the process of converting one form of energy into another. The reactions involved in this research are …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 18–22 Read article
-
Review of Silicon Reactivity of Self-assembled monolayer and its Properties
Abstract: In most cases, the assumption of perfect high viscosity between silicon and silver underlies the modelization of silicene on Ag(111). According to recent reports, growth does not take place on top of the Ag(111) terraces, but rather within the first layer of them. In this article, we present the results of a study that combines scanning tunnelling microscopy and density functional theory to simulate the nucleation process and reveal the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 29–33 Read article
-
Chemical Process of Diamonds and CVD Methods
Abstract: Many times, first-order kinetics can be seen in gas-phase decomposition events. However, it is now known that such reactions are actually governed by bimolecular processes. Bimolecular collisional activation to an energy sufficient for decomposition sets off the reaction. Gas-phase processes occurring in catalytic cycles are also to blame for the development of the ozone hole in the polar stratosphere in the spring, albeit heterogeneous mechanisms must also be taken into …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 12–17 Read article
-
Molecular Study of Indian Herbals at Microwave Region Using Time-domain Spectroscopy
Abstract: The dielectric properties of liquids are useful to some extent to understand the liquid structure and molecular interactions therein. The study of dielectric properties of liquid materials is necessary not only to understand the liquid structure but also to provide technical data for practical uses in industry, science, medicine, and engineering. Time-domain spectroscopy (TDS), a spectroscopicmethod used in physics uses brief terahertz radiation pulses to examine the characteristics of matter. …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 23–28 Read article
-
Corrosion Protection of Copper Metal by Nanocoating in Nitrogen dioxide Environment
Abstract: Nitrogen dioxide is an acidic gas. It absorbs moisture to produce nitric acid. It creates corrosive medium for copper metal. It forms corrosion cell on the surface of copper and accelerate corrosion reactions. The corrosion cell formation is written as: Cu|Cu2+||H+|H2 thus corrosion reactions start and copper is oxidized into Cu2+surface and it is oxidized into Cu2+ whereas H+ ion is reduced into H2. Nitric acid environment copper exhibits galvanic, …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 1–11 Read article
-
Review of Thermodynamic Effect on Atmosphere
Abstract: The study of heat-to-work transitions that occur in the earth's atmosphere and manifest as weather or climate is known as atmospheric thermodynamics. The laws of classical thermodynamics are used in atmospheric thermodynamics to describe and explain phenomena such as moist air characteristics, cloud formation, atmospheric convection, boundary layer meteorology, and vertical instabilities in the atmosphere. Thermodynamics is more specifically concerned with the conversions of energy into mechanical energy and mechanical …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 38–43 Read article
-
Short Experimental Report on the Passive Microfluidic Flow in Fluid Mechanics
Abstract: In this work related to experiments, two individual polymethylmethacrylate (PMMA) based microfluidic devices (microchannel bends) are fabricated by the following techniques: (a) maskless lithography, (b) hot embossing lithography, and (c) direct bonding technique. Dyed water is chosen as working liquid in this particular work. The CMOS camera is used to capture each passive microfluidic flow of dyed water in the fabricated devices. The effects of channel aspect ratio and centrifugal …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 32–37 Read article
-
Developments of Glass-Ceramics in Modern Scenario
Abstract: This article is a study on glass science and methods to achieve esteem. Synthetic protocols has been implacable secure to obtain glass-ceramic properties. First glass-ceramic capability has been introduced by Stookey in 1950s’. His excellence has reticulated control on devitrification of glass by adding nucleating agent i.e. TiO2 in 1960s’. Extendable pursue has rated score depending on sinter philosophy on glass-ceramics as well former scripture that has been etiquette of …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 23–31 Read article
-
Design of a Plug Flow Reactor for Production of Refrigerants from Natural Gas Chlorination
Abstract: The design of a plug flow reactor and distillation column for the production of refrigerants from natural gas chlorination, was aimed at achieving high purity volume percent of Methyl Chloride (CH3Cl) and Methylene Chloride as desired products. Aspen HYSYS software was used to simulate the reactor. The reaction was carried out at a temperature of 3000C and 1atm Pressure, Methane to Chlorine ratio was set at 1.5:1 to favour the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 10–22 Read article
-
Physical and Chemical Adsorption and its Applications
Abstract: The content of the review requires extensive information about the excellence of its physical and chemical types, which is a superficial phenomenon that refers to the ability of solid or liquid materials to attract or pull molecules of gases or liquid solutions to their surface to come into direct contact with them, where the term adsorbents is used to denote those solid or liquid materials. The liquid used to adsorb …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 1–9 Read article
-
Modelling and Simulation of a Bio-Fermenter for Ethanol Production
Abstract: Industrialization and world population are continuously increasing and this demands high energy. Ethanol is one of the leading bio-fuel in recent years. In this research, mathematical models were developed to monitor, predict and simulate the rate of production of ethanol from the fermentation process of corn. Increase in the ethanol production was observed within the range of 0 >D_S≤0.25 of solvent dilution rate with the optimum value of ethanol concentration …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 1, 2021 · pp. 39–50 Read article
-
Deep Sea Rock Drill Fluid Improved Performance by Addition of Nanomaterials
Abstract: This review contains descriptive issues about improvement in bentonite-based drill fluid after nano matter addition applicable to oil and gas well. This is to improve high-temperature access as well as viscous-dynamic performances under low fluid loss. Oil-based drill fluid seemed to be more favorable as restrict seal by mud cake containing shale whereas water-based drill fluid is economical and ecofriendly. Shale of mine is often searched as the sacred source …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 1, 2021 · pp. 29–38 Read article
-
Evaluation of Thermodynamic Properties of Helium using Cubic Equation of State based Approach for Energy Industry Applications
Abstract: Equations of state based methods are important techniques for thermodynamic property prediction ofcompounds and mixtures. The Peng-Robinson cubic equation of state is one of the most well-knownformulations for gases and gas mixtures used in the process and energy industries. In this study, it isused to predict pertinent thermodynamic state variables of helium gas for its use in very hightemperature as well as extremely low temperature thermodynamic cycle application for powergeneration …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 1, 2021 · pp. 1–9 Read article
-
Isothermal CSTR Heat Exchanger Rating Models for Acetic Acid Production using Homogeneous Catalysed Reaction
Abstract: This work deals with the development of design models for heat exchanger rating in homogeneouscatalytic acetic acid production at isothermal condition exploiting the derived continuous stirred tankreactor heat generation per unit volume equations at constant temperature. Coil in tank heatexchanger is invoked for this study resulting to novel design equations which were stochasticallyexamined and found to be capable of simulating the rating performance dimensions as a function ofkinetic parameters. The …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 1, 2021 · pp. 14–28 Read article
-
Short Review on Thermodynamic Effect to Generate the Surface-Driven Microfluidic Flow in Fluid Mechanics
Abstract: The levels of fluid mechanics are bulk-fluidics (macrofluidics), microfluidics, and nanofluidics in thedirection of miniaturisation. In this review, a brief account is provided to describe the thermodynamiceffect behind the generation of any surface-driven microfluidic flow in the regime of fluid mechanics.Also, an experimental demonstration on the surface-driven microfluidic flow of dyed water isprovided corresponding to the SU-8 based glass microfluidic devices fabricated by masklesslithography and indirect bonding technique. A prominent …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 1, 2021 · pp. 10–13 Read article
-
Tetrahydro-dibenzo[a,d][7]annulene-5,11-dihydrazone and Magnesium oxide Used to Control the Corrosion of Aluminium in Chloride ions Environment
Abstract: Chloride ions interact with aluminium in marine atmosphere to form corrosion cell. Due to this corrosion reaction occurs on their surface, aluminium is oxidized into Al3+. The corrosion reaction accelerates deterioration in metal and it produces galvanic, pitting, stress, crevice, intergranular corrosion. Chloride ions decrease internal and external strength of aluminium metal. It is a very important metal so used in different appliances for e.g. road, water, air transports, housing, …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 2, 2020 · pp. 35–48 Read article
-
Thermodynamic study of Pr(III) complex in mixed solvent system at 303.15K
Abstract: A conductance study of the interaction between Pr(III) complex in mixes solvent system at 303.15K. The metal-ligand stability constant of the complex was determined by conductance measurements. The free energy change of the complex was investigated at 303.15K using thermodynamic relations, the negative values of free energy means that the complex formation process is spontaneously.Key word: metal –ligand stability constant, conductometry., thermodynamics relations
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 2, 2020 · pp. 16–19 Read article
-
Overview on the Thermal Properties, Geometric Structure and Recycling Process of Thermoplastic Materials.
Abstract: This study is aim to discuss the thermal properties, geometric structure and recycling process of thermoplastic materials. Also, recycling is one of the most important actions currently available to reduce the negative impact on the environment and represent one of the most dynamic areas in plastics industry today. Thermal properties, geometric structure and recycling process of thermoplastic materials deals with the properties of thermoplastics which includes: it may melt before …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 2, 2020 · pp. 20–24 Read article