All articles
111 articles
-
Reviewing the Evolution of Nanotechnology in the Oil and Gas Sector: Focus on the Utilization of Silica Nanoparticles
Abstract: Nanotechnology is advancing notably in the oil and gas sector, with its applications demonstrating substantial progress. The use of nanoparticles in various aspects of the industry has shown promise in addressing challenges and improving efficiency. Nanotechnology is finding applications across multiple facets of the oil and gas industry, encompassing areas such as the development of drilling and hydraulic fracturing fluids, cementing for oil wells, improved oil recovery techniques, corrosion prevention, …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 30–36 Read article
-
Green Synthesis of Zinc Oxide (ZnO) Nanoparticles using Urtica dioica Plant Leaf Extract
Abstract: The green synthesis of nanoparticles by biological systems, particularly plant extracts, has become an emerging area of nanotechnologies. Nano materials have wide range application in various fields such as electronics, optics, material science and bio medical science due to their size and morphology. Zinc oxide is a versatile semiconductors material and has attractive properties like wideband gap (3.2eV) large exciton biding energy, high stability and environmental friendly material. The synthesis …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 44–57 Read article
-
Performance Calculation of a Gas Plant Compressor Unit
Abstract: This research was centered on calculating the performance of a gas plant compressor unit which was achieved using Tunu Booster Station facility. The results shows that the ability of the compressor, isentropic efficiency and coefficient of performance of the compressor gave values of 33899kw, 0.83 and 1.2. The deviations from the existing plant values were 35.6%, 31.7% and 20% respectively. Other parameters that were considered and evaluated include the failure …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 13–24 Read article
-
Comparative Experimental Measurement on the Fundamental Properties of Chemically Treated Natural Fibers
Abstract: Plant-derived natural fiber as a reinforcing component can play a prevalent role in the field of fiber reinforced polymer composite due to their obtainability, environmentally friendly, renewability, low- density, and low cost. Golden fiber (jute fiber)/coconut fiber can be a potential candidate to replace the synthetic fiber reinforced polymer composite. The influences of chemical treatments such as mercerization, sodium lauryl sulfate and a combination of mercerization and sodium lauryl sulfate …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 34–44 Read article
-
Fabrication of a Novel and Efficient Radiation Grafted Functionalized Polymer Adsorbent and Investigation of its Applicability in the Adsorptive Removal of Cr (VI) Ion from Aqueous Solution
Abstract: The grafting of glycidyl methacrylate (GMA) onto non-woven polyethylene (PE) fabric was accomplished using a radiation-initiated grafting technique. The grafted textiles were allowed to react using triethylamine to create functioning amine groups. Upon bond formation yield, the impact of grafting intensity has been examined. Utilizing the appropriate technologies, such as FTIR, TGA, and SEM, the adsorbents were rigorously examined. There was evidence of GMA grafting and diamines according to FTIR, …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 1–15 Read article
-
Review of Composites formed of Thermoplastic as Organic Fibers
Abstract: Composites made of structural monomers gave rise to thermoplastic polymers (TMCs). Due to their usage of a thermoplastic matrix, these materials really aren't chemically reactive. TMCs may be remoulded without degrading when heated and become softer. They harden into the final shape when they cool. Thermoplastic materials bonded with plant fibers may one day be used to create impact- absorbing structure for renewable power. Its impact features of organic fiber-reinforced …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 28–33 Read article
-
Study of Heavy Metal ion adsorption from Synthetic Wastewater with the help of biomass and analysis of Mathematical Model
Abstract: The biofilm matrix is a mixture of secreted polymers, metabolites and nutrients ingested, lysis solution products, and even particle debris. This matrix, which is polyanionic by nature, is essential for the activated carbon of metal cations. In this study, the heavy metal adsorption mechanism in biofilms is modelled in one spatial dimension. The numerical method is a free-boundary value issue for nonlinear parabolic and quadratic partial differential equations. Parabolic equations …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 45–56 Read article
-
Study of PLA and its Synthesis Kinetics
Abstract: In this project we studied about Polylactic Acid and its production kinetics. The most often found optically active hydroxycarboxylic acid is lactic acid (LA, also known as 2-hydroxypropionic acid). In the form of L-and D-Lactic Acid, this chiral molecule may be found. The building blocks of polylactide are carboxylic acid monomers produced by fermentation of sugars from renewable sources, such as sugar cane, beet root, or corn starch. These sugars …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 16–27 Read article
-
Photon assisted Bio Nanopolymers for applications of drug delivery, diagnosis & would healing
Abstract: Biopolymers are valuable complex materials. They attract attentions of many scientists, engineers, and medical professionals’ for application research. The focus of this research is a base line assessment of valuable Nanosized biopolymers, Chitosan. As ordinary polymers, nano sized biopolymers are visualized as natural and synthetic polymers. Hence, systematic descriptions of nanosized biopolymers, the synthesis methods, characterization methods, and biomedical application will be presented. In this regard, the photon activated green …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 25–36 Read article
-
A Literature Review on the Mechanical Properties of Banana Fiber Reinforced Polymer Composites
Abstract: The usage of composite materials and environmental contamination, as well as the utilization of renewable and biodegradable resources, are closely intertwined in today's rapidly developing world. An environmental researcher is hunting for sustainable materials. The forms and sizes of both natural and synthetic fibers are diverse. Researchers, engineers, and scientists have recently become interested in natural fibers as an alternative reinforcement for fiber-reinforced polymer composites. They are used to replace …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 1–12 Read article
-
Modification of Poly Vinyl alcohol by Grafting and Appropriate Blending for Higher Stability and Biomedical field Application
Abstract: PVA is a one of the most important vinyl polymer which is widely used in industrial applications. PVA polymer has excellent adhesive property, solubility in water and it is biodegradable. But when it is modified by appropriate crosslinking or grafting or blending techniques then its physical as well as stability is altered. When polymer is modified by blending with other materials then its degradability decreases but thermal stability increases. In …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 27–33 Read article
-
Preparation and Evaluation of Plant-Based Coir Fiber-Reinforced Polypropylene Composites
Abstract: In the present article, unidirectional coir fiber (CF) and alkali-treated CF (ACF) were incorporated in polypropylene (PP) with and without 3-aminopropyl trimethoxy silane (AS) and tetramethoxy orthosilicate (TS) to produce composites by a compression molding technique. The basic properties of PP/CF composites (e.g. tensile strength, tensile modulus, impact strength, and water absorption) have enhanced with increasing CF content. The incorporation of AS and TS after alkali pretreatment for CF composites …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 34–47 Read article
-
Synthesis Innovative Cyclic Formazan Compounds for the First Time and Evaluation of Their Biological Activity
Abstract: The research included the invention of cyclic formazan compounds for the first time in this research that carried out in April 2021, where the usual formazan compoundswere previously attended, but in the current research we attended the cyclic formazan compounds as innovative compounds and after that they were diagnosed by reliable chemical means of measurement, that provided vibrant indication of theirchemical constructions via numerous technical apparatuses similar (FT IR-Bands, 1H.NMR-Peeaks, …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 5–14 Read article
-
Review On Carbon Reinforced Fiber Composites Using Banana Fiber as Reinforcement Material
Abstract: Composites play a vital role in the area of materials science and engineering as compared to conventional materials composite materials seems to be better than alloys /metals. Composites mean mixing of two different materials of various properties. Composites materials will work for more life no wear and tear problem less weight compared to metal/alloys. In this paper review is studied on carbon reinforced fiber composites using banana fiber as reinforcement …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 1–4 Read article
-
Studies on Effect of Organoclay and Melamine Powder on Flexible Polyurethane Foam for Aerospace Applications
Abstract: Flexible polyurethane foam (PU) is a suitable candidate for various aerospace applications like acoustic insulation due to its high flexibility, ease of processing, etc. But one of the major disadvantages of this foam is low flammability resistance. The aim of this study is to improve the flame resistant properties of flexible PU foam through incorporation of additives. Flexible polyurethane foams were synthesized through one shot process with organically modified nanoclay …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 15–26 Read article
-
Thermal, Mechanical, Morphological and Rheological Behavior of HDPE and Algae Based Polysaccharide Blend
Abstract: The use of renewable resource based materials as filler for thermoplastic polymers showed wide scope in agriculture, textile and commodity applications due to low cost and high mechanical properties. In this work marine red algae based polysaccharide was used as a filler material for high density polyethylene (HDPE). The polysaccharide extracted from marine based red algae is a byproduct of algae to oil extraction process. The blends were prepared using …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 35–44 Read article
-
Development of PVC Flute and Acoustic Testing for Commercial Production
Abstract: Flute is a musical instrument generally made of bamboo. Bamboo flute has less life and high price. Thus more durable material can be used which cannot be affected by environment. The PVC is most popular material which possesses these qualities and also cost effective. However, it should produce same pitch quality. This work focused on an idea to develop a high quality PVC pipe flute. A simple drill is used …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 27–34 Read article
-
Fabrication and Study of Natural Plant Fiber Reinforced Polymer Composites
Abstract: Snake grass fiber (sansevieria trifasciata fiber, STF)-strengthened polypropylene (PP) based composites (30 wt% by fiber) was made by hot press technique. STFs were modified by ultraviolet (UV) rays and the composites they produced were evaluated. Optimized STFs were again modified with monomer using UV rays to progress the mechanical features of the composites. Monomer concentration and no. of UV rays were optimized in terms of grafting and mechanical features of …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 11–22 Read article
-
Experimental Demonstration on Polymer based Microfluidics
Abstract: In this experimental work, a single polymer based gradual expansion microchannel is designed. This microchannel is fabricated by the maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory. Dyed water is the prepared working liquid in this work. The surface-driven (passive) microfluidic flow of dyed water is recorded in the fabricated device using a CMOS camera catching 25 frames per second with a corresponding time-scale resolution …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 23–26 Read article
-
Aerogel to Study Nano-composite
Abstract: This article has linked to economic aerogel utility of build as by apply of thermal insulation from high and low temptation than usual subscription. Aerogel for building construction always esteemed to be damp proof reticulated architected formation. Space mission is inclusive afterwards as an energy absorber. Typified composite form mostly subjected to class as notified form after solidification on drying gelatinous composes from carbon, clay and silica. Multifunctional material characteristics …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 1–10 Read article