All articles
107 articles
-
Comparative Study of the Nature of Slag in the Formulation of Concrete Pavers
Abstract: The steel mill generates about 8000 tons/year of slag by transforming scrap metal to produce more than 60000 tons/year of wire rod and steel reinforcing bars. These co-products are stored or used for backfill. With this almost inexhaustible slag deposit, Morocco has a valuable resource thanks to its high content of silicates, lime and metal oxides. This has led to the attempt to valorize it in the manufacture of paving …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 12–27 Read article
-
Nanocoating and Electrospray Techniques Use to Mitigation Corrosion Sculptures
Abstract: The most sculptures of the world are created by the brass, bronze, iron, silver, gold and metalloid. They come in contact of corrosive pollutants to produce chemical, electrochemical and biochemical reactions and develop various form of corrosion like uniform corrosion, galvanic corrosion, pitting corrosion, stress corrosion and crevice corrosion. The corrosive gases CO2, NO2 and SO2 concentrations increase in atmosphere rapidly after industrialization. The major contributors of these gases are …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 1–11 Read article
-
Review on Electrolytic Process by Refining the Metals
Abstract: Electrolysis is a method of purifying impure metals. The crude metal that needs to be refined serves as the anode in an electrolytic cell while the metal that has been purified serves as the cathode. To ensure that the metal at the cathode is reduced extremely specifically, the electrode potential is chosen. Impurities are left behind in the electrolyte liquid as the metal is transferred from theunrefined metal of the …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 5–9 Read article
-
Studying the Effects of Extracts that Prevent Corrosion on Sheet Metal in an Acidic Condition
Abstract: The prevention of corrosion in steel materials in acidic conditions is summarized in this paper. There are many accelerated corrosion preventives for acidic solutions available. High temperatures, lowgrade steels, and HCl solutions are the main focus points. The creation of corrosion inhibitor compositions which combine corrosion inhibitors with surfactants, solvents, and expressions to increase the potency of single compounds at extreme temperatures is another focus of this analysis. This review’s …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 22–26 Read article
-
Adverse Effects of Copper Extraction on the Environment and Living Things
Abstract: The extraction procedures are known as heap and situ leaching; throughout these procedures, particles react with one another to produce acidic mists that not only hurt people’s skin, eyes, and lungs but also ruin crops, degrade the quality of the land, and injure surrounding structures. It tastes awful and stinks like acid dust. The ore typically needs to be beneficiated as with all mining processes. The methods of processing are …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 10–15 Read article
-
Ability of Metallic Materials to Resist Surface Damage Induced by High-temperature Action of Air or other Gaseous Mediums
Abstract: The features of the oxide layer scale that forms on the metal's surface and limits gas penetration into the metal, limiting the growth of gaseous corrosion, influence a metal's or alloy's oxidation resistance in an oxidising atmosphere. The rise in weight of sample being tested (due to oxygen uptake by the metal) or even the weight loss after removing the scale from the sample's surface, related to a unit surface …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 16–21 Read article
-
Basic Principles and Techniques in Powder Metallurgy
Abstract: This study provides a brief overview of recent advances in powder metallurgy methods, and their applications as challenges encountered throughout the research. The primary goal of this paper is to showcase the different uses of modern powder metallurgy technology and to inspire visitors to learn more about these topics and produce more papers about it. Metallic injection moulding (MIM) is another term for advanced powder metallurgy. The technique could be …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 1–4 Read article
-
Partial Replacement of Coarse Aggregate with Coconut Shell
Abstract: In such a structure, we are studying coconut shell which is a good replacement. It is a concrete or coconut shell that we will study on. We put the coconut shell on the replacement of cement, because coconut shell is very light weight. so instead of concrete we will use it, and in a way, using concrete. It is a non-renewable natural stone aggregate which proves to be very convenient …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 29–43 Read article
-
Creating Awareness on Toxic Nature of Lead
Abstract: In our day-to-day life, we come across in contact with hundreds of substances such as natural or synthetic which are toxic. In recent time, the number of chemical substances in use as increased drastically. Lead is one such element that contaminates the environment and also enters the human body. Heavy metals have relatively high density and are toxic even at ppb levels which include Pb, As, Hg, Cd, Zn, Ag, …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 44–47 Read article
-
Study the Corrosive Effect of Greenhouse Gases on Metallic and Non-metallic Materials
Abstract: Carbon dioxide is a major corrosive pollutant for building materials. It enters inside materials by diffusion or osmosis process and in presence of moisture it produces H2CO3 which decrease the pH value and accelerates chemical and electrochemical reaction with building materials. The carbonation reaction produces deterioration inside and outside of building materials. It produces corrosion reaction with metallic bar and disbanding with concrete. CO2 reacts with Ca (OH)2 and Mg(OH)2 …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 17–28 Read article
-
Effect of Indigenous Micros on Metal Corrosion in Different Water Environment
Abstract: The research on the effect of indigenous micros on metal corrosion in different water environment in life sciences and other fields as well as their significance was investigated. Mild Steel is one of the construction materials used in the industries. It has a young modulus of 200GNm-2. This paper focuses on the experimental study for the effect of indigenous micros on metals in different water environment and also of the …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 1–10 Read article
-
Modern Ceramic Compose to Pervade Electronics
Abstract: This article composed from articles where ceramics, photonics, and allied fame schemed. Scheme of materials is studied to transduce optical, electrical, mechanical, and magnetic phenomenon. Evolution of description at nanometer level of distributing from non-degenerating phases schemed ferrite in the ferroelectric matter to subject magnetic memory contravened from/by electrostatic to electrical current preserved memory acts. Suggestive selective scriptive as from magneto-electric effect induced dielectric polarization of material under effects of …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 11–16 Read article
-
Performance Enhancement and Improvement of Energy Efficiency in Evacuated Tube Heat Pipe Collector with Nanocomposite: A Review
Abstract: Solar collector tube is used to combine incident energy and convert it into heat energy. Recently several studies have been done on improving the performance of the solar collector. Solar energy is clean energy and does not create pollution. The sun gives more power than we need. Solar collector consists of an absorber unit which transfers the heat energy of the sun to a working fluid. It is easily seen …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 27–31 Read article
-
Polycarbonate/ABS Alloys: Production, Testing and Applications—An Overview
Abstract: The commercial production of polycarbonate (PC) began in 1958; the commercialization of the polycarbonate/ABS blends started in 1977. The incorporation of ABS to PC minimizes its drawbacks without altering its superior mechanical properties. Blending of PC and ABS also generates other useful characteristics i.e. glossiness and low temperature toughness. Blending of both the polymers is being carried out in a twin-screw extruder or in a common solvent like Tetrahydrofuran (THF).Nowadays …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 32–37 Read article
-
A Predictive Model on Pipeline Corrosion
Abstract: A comprehensive mathematical model is developed to predict corrosion rates in pipeline. The specimenused for this design is coupons (mild steel). Four containers with different solvents of 0.5 concentrationof nitric acids, 0.5 concentration of HCl, fresh water, and saltwater respectively were provided, andthe four paired coupons were placed inside the solvent for seven days. Each day, the coupons wereremoved, washed, dried, weighed, and placed back into the solvent. The result …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 17–26 Read article
-
Steel in Marine Weather
Abstract: Offshore structures of steel are reviewed after suitable application at onshore. Coat of stitch pad wet weld heat treat is subjected to improve the properties from high strength low alloy steel. Underwater welding with or without environment has modifications from the use of weld heat to heat treat, selection of electrodes containing silicates and polymer agglomerates to induce more heat of weld and penetration. Typical coat crack detect inswing from …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Treatment of Oil Spills and Heavy Metals in Environment
Abstract: Treating oil spills and heavy metals is the problem of the old decades and continued to find technicalsolutions to address the problems of pollution with heavy metals and oil spills in sea waters as aresult of transporting oil in ships. In general, the health of all marine and terrestrial organisms aswell. This term usually refers to offshore oil spills, where oil is poured into the ocean or coastalwaters, but may …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 9–16 Read article
-
MANUFACTURING AND TESTING OF CNT BLENDED NAVAL BRASS
Abstract: The Utilization of advanced technologies increased the scope of producing new materials drastically .as a result wide spectrum of nanomaterials are being produced these materials are manufactured as per the desired properties in the final material /composite. The aim of this study is to investigate the effect of CNT (Carbon Nano Tubes) reinforcement into naval brass (Cu-CNT 60%, Zinc 39%, and Tin 1%) naval brass is widely applied in the …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 7–11 Read article
-
Recent Trends and Challenges of Lithium Sulphur Batteries
Abstract: Lithium-ion (Li-ion) batteries that are currently available in market have certain limitations due to their low energy density and do not meet the growing demands of the energy storage market. Thus, the building next-generation rechargeable Li and Li-ion batteries with the higher energy densities, better safety characteristic, lower cost and longer cycle life is vibrant to overcome the challenges of fast depleting conventional energy resources. To achieve smaller and lighter …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 1–6 Read article
-
Study of the effect of Silicon oxide nanoparticles in the copper alloy
Abstract: The main objective of this paper is to study the effect of the Silicon oxide nano particles in the copper alloy which is manufactured by using the stir casting process and samples are prepared as per the ASTM standards. These specimens are tested under the mechanical tests. Due to blending of the nanoparticles the properties of copper alloy will be enhanced. so uniform ASTM samples with varying composition of nano …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 24–31 Read article