All articles
30 articles
-
Advanced Magnesium-Based Metallic GlassComposites for Biomedical Implant Applications: AMachine-Learning-Informed Approach
Abstract: Magnesium-based bulk metallic glasses (Mg-BMGs) combine strength, low density, and tunable degradability. Their amorphous matrix has a small plastic process zone. This zone is only about 4 μm wide. A small process zone keeps most glasses brittle. Adding a second phase is the best fix. This chapter extends Mg-BMGs to true composites. We call these Mg-based bulk metallic glass composites, or Mg- BMGCs. The chapter covers matrix engineering and interfacial …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 48–65 Read article
-
Revolutionizing Bone Grafting: A Survey of 3D Printed Solutions
Abstract: Due to the limits of conventional grafts, large bone deficiencies resulting from illness or trauma continue to be a significant clinical challenge. Autografts, while osteoconductive and osteoinductive, are limited by donor availability and morbidity, and allografts/xenografts carry risks of immune rejection and disease transmission. In contrast, 3D printing (additive manufacturing) enables fabrication of patient-specific bone scaffolds with controlled architecture, composition, and bioactivity. Using techniques, like selective laser sintering (SLS), stereolithography …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 16–23 Read article
-
Virgin-Recycled Thermoplastic Matrix Systems as Engineered Composite Materials: A Compositional Framework for Mechanical Property Retention in Secondary Polymer Supply Chains
Abstract: Virgin-to-recycled thermoplastic resin blends, while conventionally treated as simple two- component mixtures in secondary polymer supply chains, exhibit compositional and morphological characteristics that are more accurately described using the framework of engineered composite matrix systems. This paper presents a compositional framework for understanding and predicting mechanical property retention in virgin-recycled polypropylene (PP) and high-density polyethylene (HDPE) matrix systems, developed through more than twenty years of commercial secondary polymer distribution practice …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 Read article
-
A review on Biochar and its Nanocomposites for Removal of Toxics from Wastewater
Abstract: Biochar is a carbon-rich material formed by the thermochemical conversion of biomass under oxygen-limited circumstances, providing a long-term solution for waste valorisation and environmental management. Because of its high stability, surface functional groups, and porous structure, biochar has been used extensively in pollutant adsorption, carbon sequestration, and soil amendment. Recent developments have produced biochar nanocomposites, in which the physicochemical properties of biochar are improved by engineering or combining it with …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 15–29 Read article
-
Mechanical and Thermal Characterization of Natural Fiber-Reinforced Epoxy Composites for Structural Applications
Abstract: Natural fiber reinforced polymer (NFRP) composites have emerged as promising alternatives to conventional synthetic fiber composites owing to their environmental sustainability, low density, and competitive specific mechanical properties. However, a comprehensive and simultaneous evaluation of both mechanical and thermal performance of jute/sisal hybrid natural fiber epoxy composites under systematic fiber treatment conditions remains insufficiently addressed in the literature. The present study investigates the mechanical and thermal characterization of jute and …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 37–48 Read article
-
Catalytic Applications of Carbon Nanodots
Abstract: Carbon nanodots (CNDs) owing to their hydrophilicity and multifunctionality and with ultrasmall size exhibit metal-like properties resulting in astounding catalytic performance. These nanostructures, typically less than 10 nm in diameter, possess unique physicochemical and electronic characteristics including tunable photoluminescence, high surface-to-volume ratio, abundant surface functional groups, and excellent electron transfer capabilities. Such properties have driven extensive global research into their application in heterogeneous and homogeneous catalysis. Recent advances in synthesis …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 9–14 Read article
-
Effect of Nano-Fillers on the Mechanical and Fracture Behavior of Polymer Composite Matrices: A Review
Abstract: The modification of polymer composite matrices through the incorporation of nano-scale fillers has become a prominent and highly effective strategy for enhancing mechanical performance, stiffness, and fracture resistance. Unlike conventional micro-scale reinforcements, nano-fillers possess exceptionally high surface area–to–volume ratios and unique physicochemical characteristics that significantly influence interfacial phenomena within the polymer matrix. Materials, such as carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), nano-silica, and layered silicate nanoclays, introduce advanced toughening mechanisms …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 31–36 Read article
-
Comprehensive Review on Bamboo-Based CompositeMaterials for Sustainable Engineering Applications
Abstract: Among various natural resources, bamboo has emerged as a promising reinforcement material due to its rapid growth rate, wide availability, low cost, and excellent specific mechanical properties. Bamboobased composite materials combine high strength-to-weight ratio with renewability, making them attractive for diverse engineering applications. The increasing concerns related to resource depletion, carbon emissions, and end-of-life disposal of synthetic composites further highlight the need for biobased and sustainable material solutions. This review …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
Recent Trends in Bio Ceramic and Polymer Compositesfor Biomedical and Dental Applications
Abstract: Advanced biomaterials with great promise for use in dental and biomedical applications are bio-ceramic and polymer composites. These composites combine the flexibility, biodegradability, and processability of polymers with the mechanical strength, bioactivity, and biocompatibility of bio-ceramics. Clinical success is often limited by the biological response and tissue compatibility of conventional materials such as metals and single-phase ceramics. Oste conductivity and bone-like characteristics are exhibited by bio-ceramic materials, such as hydroxyapatite …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Analysis of Non-Uniform Damped Rayleigh BeamResting on Pasternak Foundation Subjected toDistributed Load with Variable Axial Force
Abstract: In this paper, damped non-uniform Rayleigh beam resting on Pasternak foundation and subjected to distributed load with variable axial force has been investigated. The solution techniques to the governing equation describing the dynamical system are based on Galerkin’s method, Laplace integral transformation in conjunction with convolution theorem. Galerkin’s method is explored to reduce the fourth order non-homogeneous partial differential equation to a second order ordinary differential equation. The resulting equation …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 26–35 Read article
-
Analysis Of Non-Uniform Damped Rayleigh Beam Resting on Pasternak Foundation Subjected to Distributed Load With Variable Axial Force
Abstract: In this paper, damped non-uniform Rayleigh beam resting on Pasternak foundation and subjected to distributed load with variable axial force has been investigated. The solution techniques to the governing equation describing the dynamical system are based on Galerkin’s method, Laplace integral transformation in conjunction with convolution theorem. Galerkin’s method is explored to reduce the fourth order non-homogeneous partial differential equation to a second order ordinary differential equation. The resulting equation …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 6–16 Read article
-
An Insight into the Advanced Composite Materials Used in the Aviation Sector: A Review
Abstract: The creation of complex and specialised materials, such as composite materials, has advanced significantly in the field of aerospace engineering due to technological challenges. Composite materials are currently playing a bigger role in aviation engineering because of its greater strength at a reduced mass, firmness, and corrosion aversion. The study of composite substances used in aviation structures and further advanced composites as building materials are both covered in this paper. …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–11 Read article
-
Optimization of Wear Parameters for Medical ImplantApplications
Abstract: The purpose of the present research is to check the capability of SS 304 for the application of medicalimplants and describe the influence of sandblasting process, applied load, frequency, and slidingdistance on the coefficient of friction of SS 304. In this research, attempts have been made to study thewear behavior of SS 304 under various conditions. In the tribology lab, a wear test was carried out inaccordance with the scheme …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Wettability of carbon fibers with resin matrices from dynamic contact angle measurements
Abstract: Wettability is the property that quantifies the propensity of a solid surface (carbon fiber) to be covered by a liquid (resin). For a wettable solid, the solid-liquid contact is favoured and as a result the liquid spreads on such surface of the solid. Spreading of the liquid on the solid surface is primarily driven by the adhesive forces between the liquid and the solid, while the inter molecular cohesive forces …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 Read article
-
Optimization of Wear Parameters for Medical Implant Applications
Abstract: The purpose of the present research is to check the capability of SS 304 for the application of medical implants and describe the influence of sandblasting process, applied load, frequency, sliding distance on the coefficient of friction of SS 304. In this research, attempts have been made to study the wear behavior of SS 304 at various conditions. In the tribology lab wear test was carried out in accordance with …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Sustainable Labware Solutions: A Study of Biodegradable Modified Polypropylene for Sterilization‑Resistance
Abstract: This study investigated the impact of incorporating a 1‑3% by weight of biodegradable additive into polypropylene (PP) using twin‑screw extrusion, followed by injection molding to prepare test specimens. The effects of the additive on the rheological, thermal, mechanical, and optical properties of PP were investigated, along with the impact of two common sterilization methods: autoclave (121°C, 15 min, 0.11 MPa) and electron beam (E-Beam, 50 kGy) irradiation. The results showed …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 Read article
-
Facile Approach to Epoxidize Elastomers & Its Silica Composite for Green Tyre Application
Abstract: Rubber epoxidation is usually carried out to serve dual purpose, to introduce the functionality, and to enhance the polymer – filler interaction. In general, epoxidation of elastomers having unsaturation in backbone adopt conventional refluxing and batch process which makes the synthesis complex as well as time consuming. In view of this, a novel process of epoxidation through sonication technique is identified as simple and efficient process. Synthetic rubbers containing unsaturation …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 · pp. 14–27 Read article
-
Synthesis of Brominated Poly (Isobutylene-co-Isoprene) Based Ionomers and Its Applications
Abstract: Reactive bromobutyl rubber and its modification have been studied in detail. These reactive bromobutyl rubber was converted to ammonium and phosphonium functionalized bromobutyl rubber using triphenyl phosphine (PPh3) and 4-Dimethylaminopyridine (4-DMAP). Mechanical properties of synthesized ionomers are found comparative with butyl rubber. Pharma stopper was made from synthesized phosphonium ionomer that may be useful for pharma industries due to its self-healing characteristics which can help to preserve the properties of …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 · pp. 47–55 Read article
-
Morphology and Elemental Composition of Carbon Fibers†
Abstract: Carbon fibers, owing to their unique property of high specific strength, find immense utility in almost all sectors of human activity, ranging from aeronautics, astronautics, geonautics, aquanautics, industry, catalysis, smart materials, defence, and many more. The production, properties, and applications of carbon fibers and related materials are a fertile and fast-growing research area drawing wide attention of researchers worldwide. The key feature of this original research paper is to study …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 Read article
-
An Analysis of the Mechanical Properties of Polyethylene Composites Reinforced with Short Vetiver Fibers
Abstract: Synthetic fibers (such as carbon, glass, ceramic fibers, etc.) are a cause of environmental concern, so natural fibers (such as vetiver, calotropis gigantea, flax, hemp, jute, etc.) are extensively used. In this study, the compression molding process was used to improve low-density polyethylene (LDPE) matrix composites reinforced with vetiver fiber (VF). Experiments were conducted by varying VF length, VF content, and fiber treatment time. The composites' static mechanical characteristics, including …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 · pp. 1–13 Read article