All articles
338 articles
-
Properties of Nano-scale Material
Abstract: Nanomaterials (NMs) have gained prominence in technological advancements due to their tunable physical, chemical and biological properties with enhanced performance over their bulk counterparts. Nanomaterials can be divided based on their shape, size and their origin. Properties of nanomaterials play a major role in the production and maintenance of these materials.Because of expanded development of production of NMs and their role in industrial applications, their issues related to their toxicity …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 1, 2020 · pp. 11–15 Read article
-
Effect of Calcium doping on Structural and Morphological properties of YBCO Superconductor
Abstract: In this paper, we have reported the effect of Ca doping in YBCO superconductors with an aim of understanding the effect of novel local nano distortions on the superconducting properties of YBCO. Solid state reaction method is used to prepare the samples. X-Ray diffraction pattern shows that the samples are polycrystalline and having orthorhombic structure while Resistivity measurement shows that Tc decreases with increase in Ca-doping.Morphological studies reveals clear evolution …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 1, 2020 · pp. 6–10 Read article
-
APPLICATION OF NANOTECHNOLOGY IN RENEWABLE ENERGY
Abstract: Nanotechnology is the ability to observe and control individual atoms and molecules. This technology is one of the most powerful engines of innovation – every day this technology is been incorporated into various fields of science where it increases the efficiency and durability of the products. With the use of Nanotechnology, breakthrough solutions to the real world problems have been found. Nanotechnology has a huge potential in enhancing the efficiency …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
Studies on the Electrical Characteristics of Single-Heterojunction GaN based HEMTs with AlGaN Nano-Layer of 21 nm
Abstract: In this work, we have studied the electrical characteristics of single-heterojunction AlGaN/GaN high electron mobility transistors (HEMTs). The effects of drain voltage and gate voltage on variations of drain current have studied on the basis of simulated HEMT structures. Also, we have studied the effects of aluminium mole fraction, gate length and doping concentration on variations of drain current based on the simulated HEMT structures. This present work will be …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 2, 2019 · pp. 26–38 Read article
-
The Impact of Tilt Angle on Photovoltaic Panel Output
Abstract: Photovoltaic panels are getting embedded in our life because of their numerous advantages. In order to get the maximum output from the solar panels, it is very important to align the solar panels to the correct angle. These angles play an important role in the efficiency of the photovoltaic panels. For the correct alignment, one should know the proper path that the Sun appears to take during the day. Sun’s …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 2, 2019 · pp. 39–45 Read article
-
Synthesis and Characterization of Fluorescent Core-Shell Ag@SiO2 and Ag@MoS2 Nanoparticle
Abstract: Among metals, silver (Ag) and gold (Au) NPs have attracted significant interest owing to their extraordinary optical properties related with the localized surface Plasmon resonance. However, the main drawbacks of colloidal nanoparticles, making them barely useable in the photovoltaic field, are their low colloidal stability. To overcome this problem we have developed a new class of fluorescent core-shell Ag@SiO2 nanoparticles, or simply called (MEF) nanoparticles. Different characterization techniques UV-Vis, PL …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 2, 2019 · pp. 8–16 Read article
-
Effect of MoS2 Nanosheets on ACNT-MoS2 Nanohybrids
Abstract: Here amorphous carbon nanotube – molybdenum disulfide nanohybrids were prepared using hydrothermal method. Here the amount of thiourea and hexaammonium heptamolybdate tetrahydrate were taken in two different amount such as 2.34g:1.28g and 4.68g:2.46g. The amount of amorphous carbon nanotube were kept at 0.5g of fixed amount. Finally the two as prepared nanohybrids were characterized by using field emission scanning electron microscope method.
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 2, 2019 · pp. 1–7 Read article
-
Two-dimensional MoS2 Nanosheets: Preparation and Characterization
Abstract: The amazing properties and useful applications of graphene in the field of sensors, electronics and material science opens a new challenges to other two dimensional semiconductor materials. Specially due to extraordinary electronic, mechanical and optical properties, molybdenum disulfide (MoS2) is attracting huge interest in several applications. Single layer MoS2 with direct band gap shows better semiconductor behavior such as photoluminescence, makes them more acceptable in optoelectronic applications in comparison with …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 2, 2019 · pp. 17–25 Read article
-
A “Blank” Cell: Stem Cell
Abstract: A whole new branch of medicine was formed after the discovery of stem cells known as “Regenerative medicine”. Stem cells, the unspecialized cells which can be developed into useful or specialized cells help to form the diverse human tissues in the body. They can reintroduce themselves via mitotic cell division and distinguish itself in the varied range of unspecialized cell types. According to the latest research, 68% of Americans support …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 2, 2019 · pp. 1–7 Read article
-
Nanotechnology Based Drug Delivery System for Cancer Therapy
Abstract: Nanotechnology has the potential to revolutionize cancer diagnosis and therapy. Advances in protein engineering and material science have contributed to novel nanoscale targeting approaches that may bring new hope to cancer patients. Several therapeutic nanocarriers have been approved for clinical use. However, to date, there are only a few clinically approved nanocarriers that incorporate molecules to selectively bind and target cancer cells. This review examines some of the approved formulations …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 2, 2019 · pp. 8–36 Read article
-
Effect of nano Aluminum on Thermal Behavior and Ignition Characteristics of Al/KClO4 Thermite Composition
Abstract: Ignition experiments of micron size Al/KClO4 (ALCLO) thermite composition was carried out at high heating rate (40°C/min.) using DTA (differential thermal analysis), and it was observed that no ignition took place up to 700°C. Similarly in case of STA (simultaneous thermal analyzer) experiments, no ignition peaks were found up to 1100°C at 20/min. ALCLO when ignited in a bomb calorimeter for heat of combustion output measurement it produced a large …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 9–19 Read article
-
Preparation of Conducting Polyaniline Film for OLED Application
Abstract: Polyaniline is a conducting polymer of the semi-flexible rod polymer family, this polymer captured the intense attention of the scientific community due to the rediscovery of high electrical conductivity. In present work we have prepared the polyaniline with the chemical method and done various characterization UV – vis, FTIR, and SEM. Thin film of polyaniline is prepared with the help of spin coater and determine the I-V characteristics and also …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 27–35 Read article
-
A review on the Organic Light-Emitting Diodes
Abstract: Organic Light emitting diodes OLED have received a large interest in the research community for the last few year. Device consists of a thin film placed between two electrodes of an organic compound. By applying a voltage to the electrodes, charges get injected into the organic Material where they form excited states that recombine and generate light in the past five year OLED display have developed into commercially available in …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 1–8 Read article
-
FESEM and HRTEM Analysis of ACNT-MoS2 Nanohybrids
Abstract: Material characterization is very important aspect of material science for characterizing the material. Specially field emission scanning electron microscope (FESEM) and high resolution transmission electron microscope (HRTEM) are very useful for characterize the nano-structured material. Here amorphous carbon nanotube – MoS2 nanohybrids were characterized by using FESEM and HRTEM method. Amorphous carbon nanotube-MoS2 nanohybrids were prepared through hydrothermal method using amorphous carbon nanotube, hexaammonium heptamolybdate tetrahydrate and thiourea as main …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 20–26 Read article
-
Amorphous Carbon Nanotube-MoS2 Nanohybrids : A New Future Material in the Application of Battery, Supercapacitor and Field-emission Display Devices
Abstract: The discovery of graphene make the researcher interested towards the other two-dimensional material which has quite similar properties like graphene. Among them, MoS2 nanosheets has extraordinary optoelectronic and physical properties. It has several applications in developing battery, sensor, optoelectronic device etc. On the other hand, amorphous carbon nanotube can be synthesized by using a low temperature chemical process. Due to the easy processing of amorphous carbon nanotube (ACNT), good optoelectronic …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 36–45 Read article
-
Impact of Active Layer Thickness and Incident Beam Intensity on Organic Solar Cell Efficiency
Abstract: Organic solar cell is becoming an emerging and popular field in research because of its various economic and environmental merits. This paper presents the impact of thickness of active layer and incident beam intensity on power conversion efficiency (PCE) of organic solar cell. Bulk heterojunction (BHJ) solar cell is considered with organic active layer of MEH-PPV: PCBM material and Indium-Tin-Oxide (ITO) material as transparent anode onto which beam is incident. …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 1, 2019 · pp. 19–26 Read article
-
Future prospects for DSSCs and its fabrication parameters with efficiency enhancement
Abstract: Dye-sensitized solar cells which combine the unique properties of both the organic compound and inorganic compound have attracted the attention of scientists. Thin film of TiO2 paste deposited on ITO (Indium doped Tin Oxide) acts as one electrode, Carbon electrode acts as counter electrode and ruthenium as the sensitizer. I-/I3- is used as the electrolyte. An increase of output potential when the cell was heated over a short period of …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 1, 2019 · pp. 18–30 Read article
-
Nanocomposite Sensors in Different Areas
Abstract: Nanotechnology is study of matter on atomic and molecular scale. Localized surface plasmon resonance excitations are used for important sensing and spectroscopic applications. Ultrahigh-sensitivity pressure and vibration sensor are based on concept of using variable ultracapacitor consisted of two electrodes containing as grown carbon nano-tubes of length of 20 m. Vibrating grapheme sheets attached with nanoparticles with in magnetic field are used for mass-nanosensor applications. Nanosized ferroelectric sensors have differences …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 1, 2019 · pp. 37–47 Read article
-
Nanocomposite Based Sensors and Its Potential in Modern Sectors
Abstract: Flexible nanocomposite sensors are made of two or more phases. Flexibility of polymer and low equip-distribution of nano-particulates or nano-safety are desirable requirements to use full potential. Carbon nanotubes have interesting electrical properties to produce in different configurations. These are used in temperature sensors, linear polarizers, opto-electronic and chemi-resistor devices as well as in medical electronics, packaging, automotive, solar energy fields and coatings
Published in International journal of Nanobiotechnology · Vol. 5, Issue 1, 2019 · pp. 14–18 Read article
-
Polymer Composites Based Modern Sensors for Various Applications
Abstract: Sensors tradition configured to miniaturization without shape rigidity. Sensors are fabricated by flexible organic substrate embedded with two dimensional composite inorganic particulates of nano-metric dimensions or three-dimensional electro-spin filaments. Thermal degeneration and demagnetizing effects have favored 3d composites or filamentous designs than 2d composites. These sensors have wide usage in medical electronics, aerospace engineering, textile engineering, etc. Basis of techniques are same as in cloth or paper printing. These are …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 1, 2019 · pp. 32–36 Read article