All articles
431 articles
-
A Study Model of Optimisation Using Kaizen in an Automobile Industry
Abstract: This study provides a sharp and distinct understanding and embodiment of how Faridabad Yamaha Company in the machining industry works with improvements in general and lean in particular. This thesis introduces the development of Kaizen-based maintenance system and their immediate effects on the productivity of industry. In an exploring automobile industry, many techniques are invented and implemented to discover how an automobile manufacturer can bring down his costs, using the …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 2, 2018 · pp. 21–37 Read article
-
Supply Chain Planning and Management in Assembly Line Automobile Industry
Abstract: Yamaha Motors Faridabad has changed the world with their production system. By removing activities in the manufacturing process which were not adding any value to the product, the company could become agile and offer products to the customer with short lead time as well as to a low cost. Companies in other countries needed to change their manufacturing processes in order to stay competitive, and a western variant of the …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 2, 2018 · pp. 1–20 Read article
-
Design and Finite Element Analysis of Refractory Boiler Shell for Optimum Weight
Abstract: This paper deals with the stress analysis of boiler shell with refactory. By using finite element method, a stress analysis has been carried out under the application of pressure at the inner surface of boiler shell. Von-Mises stresses and maximum shear stresses are found. Currently we are working on the condition in order to find temperature distribution so that it will be helpful for us to get thermal analysis and …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 48–54 Read article
-
Parametric Analysis of Reciprocating Friction and Wear Behavior of PTFE Composite.
Abstract: When filler materials like carbon, graphite, glass fibres are added in the PTFE, a composite is formed which improves mechanical & thermal properties of that composite. It increases hardness and wear resistance, while the coefficient of friction is slightly affected and remains low. In this survey, we study various papers in which various methods & experiments were carried out for calculating friction & wear resistance of various compositions of polymers. …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 55–61 Read article
-
A Modified Memetic Particle Swarm Optimization Algorithm for Sustainable Multi-objective Scheduling of Automatic Guided Vehicles in a Flexible Manufacturing System
Abstract: In the present work, a modified memetic particle swarm optimization (MMPSO) algorithm was applied for a sustainable multi-objective scheduling of automatic guided vehicles AGVs in a flexible manufacturing system (FMS). To achieve sustainable scheduling results for AGVs in FMS, it is imperative to integrate the work center schedule with the AGV schedule, and thereafter, minimize their distance travel and back-tracking in the FMS facility. The work center schedule in the …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 33–47 Read article
-
Design and Fabrication for Power Generation using Maglev Turbine
Abstract: This study represents about the history and global scenario of development of power generation. Indian scenario of power generation explained through tables and graph. Brief discussion about the Maglev turbine. Methodology and selection of turbine also discussed and presents the designs and fabrication of Maglev Turbine which is further used for power generation. In this paper, it is explained that miniature maglev turbine is divided in different sections to understand …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 1, 2018 · pp. 40–52 Read article
-
A Review Study of Steady State Thermal Analysis of Piston by Finite Element Method (FEM)
Abstract: This study explains with the previous literature survey that indicates about the inner combustion engine constituents like piston. The piston transports the energy of the burnt gasses from mechanical energy. The piston translates inside the cylinder liner or sleeve. The present effort is to study about the design of piston petrol engine. Computer aided engineering apparatus allows engineers to improve product and to pretend these designs for residual stress, structural …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 1, 2018 · pp. 34–39 Read article
-
Experimental Investigations on a Diesel Engine Fueled with Biodiesel Blends and Diethyl Ether as an Additive
Abstract: Blends of bio-diesel (or diesel) are fueled for engines (diesel) though direct injection by a single cylinder at various (or multiple) propagations. The determination of the emissive power and the performance of the engine is done. The emission of the NOx is considerably high when compared to the diesel fuel operation (considering all the blends). Blends are added with the diethyl-ether at various proportions. Reduction of NOx emission at the …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 1, 2018 · pp. 25–33 Read article
-
Pumping Fluid Using Pendulum Device
Abstract: In this study, we have designed a system for pumping water with minimum head. It wills helpful for deliver water or other fluid. For pumping, we can use hydraulic system and pendulum which is used to power the pumping and suction of the fluid from specific suction head and delivery head. Pendulum will rotate by using tension force of plate fitted at both side of the pendulum, which plate provides …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 1, 2018 · pp. 35–39 Read article
-
Predictive Model on Constant Pressure Drop Variable: Area Fluid Flow System in a Pipe
Abstract: The effect of density, pressure drop, and orifice area was examined in this research. The basic equation developed to represent steady-state fluid flow is the Bernoulli equation which assumes that the total mechanical energy is conserved for steady incompressible, in viscid, isotherm flow with no heat transfer or work done. These restrictive conditions can actually be representative of many physical systems. The Bernoulli’s principle was applied in explaining the design …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 1, 2018 · pp. 23–34 Read article
-
A Review on the Change Process and the Evolution of Aircraft Engine Air Intake
Abstract: All jet engines have an inlet to bring the air into the engine. That we call it the air intake. The intake duct is pre-compressor and has a significant impact on the net motor's tread. The intake duct is available in many shapes and sizes, each with a specific feature according to the engine and the speed of the aircraft. In general, the engine air intake is divided into two …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 1, 2018 · pp. 15–22 Read article
-
Density as a Factor Limiting the Workability of Sintering Aluminum Powder Preforms
Abstract: The technology advancement has envisaged going for near net shape of the produces. Also, near netshapes formed are again cold upset for obtaining a final shape of the Product.In this study a general scheme expressing the factors which affect a workability of Sintering aluminium powder preforms. This work deals with an experimental determination Workability of Sintering Aluminium powder preforms is limited by their density. A standard of rings of ratio …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 1, 2018 · pp. 40–43 Read article
-
Experimental Analysis on Generation of Electricity Through Braking System (Regenerative Braking System)
Abstract: In conventional braking system the motion is retarded or stopped by absorbing kinetic energy by friction, by making the contact of the moving body with frictional rubber pad (called brake liner) which causes the absorption of kinetic energy, and this is wasted in form of heat in surroundings. Each time we brake, the momentum of vehicle is absorbed that it has gained by it and to re-accelerate the vehicle. As …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 1, 2018 · pp. 11–24 Read article
-
Fracture and crack propagations in plates - A review
Abstract: The development and applications of the boundary based finite element technique for fractured mechanics analysis are reviewed. Also, some researchers used the complex variable method and least boundary allocation method. In this method, most researcher investigated the 2-D isotropic, anisotropic and orthotropic materials for makes different types of plate such like this rectangular and circular with various cracks and hole cut-outs and these plates are used different types of bi-axial …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 1, 2018 · pp. 1–14 Read article
-
Modeling the Thrust and Specific Fuel Consumption for a Hypothetical Turbofan Engine
Abstract: Turbofan engine is a kind of jet engine in which a large part of the intake air without going into the combustion chamber that is exited from the terminal aperture. Turbofan engines have good efficiency in speed range of passenger aircraft and in terms of noise generation have also better functionality, for this reason in most of passenger aircraft this type of engine is used. Because of the importance of …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 1, 2018 · pp. 1–10 Read article
-
Cooling and Heating Effect of Geothermal Energy and Its Thermal Analysis Using Air as a Flow Medium
Abstract: Geothermal energy is one of the renewable sources of energy, which exists free in the environment. The main concept of a geothermal energy is the thermal energy of the ground which is used for cooling and heating. Here, air is used as a flow medium. The flow medium gets cool in the summer and gets heated in the winter due to the temperature difference between the flow medium and underground …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 18–32 Read article
-
Thermal Analysis of Earth Heat Exchanger Using Air as a Medium
Abstract: Thermal energy is the main concept of an earth air tube heat exchanger (EATHE), which uses the thermal energy of the ground for cooling and heating of the fluid medium. Here, air is used as cooling medium. The air cools in summer and gets heated in winter due to the temperature difference between the air and underground surface. However, for the study of the surface heat convection study of model …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 1–17 Read article
-
The Effect of Air Bubbles Injection into a Shell and Coiled Tube Heat Exchanger: A Review
Abstract: In present study, a shell and coiled tube heat exchanger has been mathematically studied. The helically coiled tube and the effects of on thermal characteristics of heat exchanger will be proposed in this study. CFD analysis on ANSYS software will be performed. Shell tube carrying cold water, helical coil containing hot water and U shaped hollow pipe carries air. Thermal properties and its effect has been considered in the study.
Published in International Journal of Computer Aided Manufacturing · Vol. 3, Issue 2, 2017 · pp. 34–42 Read article
-
CFD Analysis of Earth Heat Exchanger with Air as a Cooling Medium
Abstract: An earth air tube heat exchanger (EATHE) uses the thermal energy of the ground for the air cooling in summer and air heating in winter due to the temperature difference between the air and underground surface. With the help of EATHE we can reduce the energy consumption required for space heating or cooling. However, for determining the surface heat convection, due to lack of available methods it is difficult to …
Published in International Journal of Computer Aided Manufacturing · Vol. 3, Issue 2, 2017 · pp. 21–30 Read article
-
Selection Criteria for a CAD System
Abstract: Computer aided design has become an important part of inventions and innovations these days. They help to accelerate and advance the development process. Today, in market, there are many CAD systems available on the basis of their functions and properties. Therefore, it becomes difficult to choose a CAD system for a particular job. This article is related to selection of appropriate CAD system for a job focusing on all influences …
Published in International Journal of Computer Aided Manufacturing · Vol. 3, Issue 2, 2017 · pp. 31–33 Read article