All articles
544 articles
-
Review on Gold Nanoparticles and Their Applications
Abstract: Gold nanoparticles are attention because of the outstanding properties (e.g., size and shape depending optical, electrical, and magnetic properties) which can be included into antimicrobial applications, biosensor materials, composite fibers, cryogenic superconducting materials, cosmetic products, and electronic components The properties of Au NPs are different from their bulk form due to the increased surface-to volume ratio determined by the assembly of the Au NPs and the inter-particle interaction. This review …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 32–39 Read article
-
Influence of Concentration Variation of Chemical Pre Treatments on Tensile Properties of Coir Fibre Reinforced Composites
Abstract: Composite material consisting randomly oriented coir fibres and epoxy resin have been studied. This study tends to analyze the tensile properties of coir fibre (10mm length) reinforced with epoxy resin by treating with Na0H and KMn04 of different concentrations. Fibers are bonded together with epoxy resin by hand layup process and cured at room temperature for 24 hours to form composite. Different tensile properties of composite were investigated in accordance …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 13–20 Read article
-
A review on E-waste: National & International Scenario
Abstract: Electrical and electronic waste (e-waste) is one of the fastest growing municipal solid waste stream in the world. The existing management practices related to E-waste in most of countries are reasonably poor and have the potential to risk both human health and the environment. According to recent studies, only about 6 percent of the E-waste is recycled, of which 95 percent is recycled through the informal sector. E-waste recycling in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 21–31 Read article
-
Study of Balanced Energy Absorbing Material for Structural Applications.
Abstract: The ballistic execution of "smart-sized" S2-glass fiber fortified epoxy was assessed in correlation with network perfect, framework semi-good and lattice contradictory estimated materials. The smart size is a detailing intended to give rate-subordinate conduct. The brilliant estimated material was appeared to show rate subordinate changes in interlaminar shear quality and mode I interlaminar break sturdiness testing; the ballistic execution of the material was enhanced just marginally over perfect measured materials. …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 34–42 Read article
-
A REVIEW ON ORGANIC LIGHT EMITTING DIODE (OLED)-AN INNOVATIVE DISPLAY TECHNOLOGY
Abstract: In the vast field of display technology, Organic light emitting diode is a new and inspiring invention. The principle on which it operates, is a process in which electrical energy changes to light energy and is termed as electroluminescence. At first, small and thin light emitting diode display invented, used for the digital display of numbers. Then, cathode ray tubes came which are being used now, however CRT have certain …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 1–12 Read article
-
Study and Implementation of High Performance Energy Harvester using Aerosol Deposition Method.
Abstract: This paper reports the high-performance piezoelectric energy harvester (EH) fabricated with PbxZr1-xTiO3 (PZT) or xPb(Mg1/3Nb2/3)-(1-x)PbTiO3 (PMN-PT) by aerosol deposition method. The other EH with the same construction and similar thickness of PZT thin film are fabricated and used as a comparison basis. The electrical and mechanical properties of both transducers are characterized and discussed. According to our previous work [1], the output power of a EH not only depends on …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 28–33 Read article
-
Porous Carbon Materials for Electrochemical Energy Storage
Abstract: The climate change and energy demand promote the rapid development of electrochemical energy-storage devices. Due to an excellent chemical stability, high electronic conductivity and large specific surface area, porous carbon materials have always been considering as a promising candidate for electrochemical energy storage. This focus review summaries recent advances in the synthesis of various porous carbon materials electrochemical energy storage devices like lithium-ion batteries, supercapacitors, lithium-ion hybrid capacitors have been …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 13–16 Read article
-
SMART MATERIALS in Manufacturing Industry – AN OVERVIEW
Abstract: Smart materials are normal name for a wide gathering of various substances. The general component of every one of them is the way that at least one property may be fundamentally adjusted under controlled condition. The present age is viewed as the smart materials time. Prior, smart material was characterized as the material, which reacts to its surroundings in an opportune way. In any case, the meaning of smart materials …
Published in International Journal of Energetic Materials · Vol. 4, Issue 1, 2018 · pp. 40–47 Read article
-
APPLICATIONS OF NANO TECHNOLOGY IN ENERGY SECTOR
Abstract: Energy is necessary for all human activity. It is the need of the hour .Now more effective methods are used for energy production such as Nano based technology. In the present era the energy consumption is more than energy production from the different sources. The use of nanotechnology is better to get higher efficiency. It is Eco-energy so there are minimum chances of environmental destruction. The property of material is …
Published in International Journal of Energetic Materials · Vol. 4, Issue 1, 2018 · pp. 6–16 Read article
-
Examination of the Amplitude Equation to the Characteristics of Harmonic Oscillators: The Concept of Schrodinger Wave Equation
Abstract: Although Heisenberg’s matrix mechanics was developed first, the Schrödinger equation was the first useful quantum wave equation. However, the Schrödinger equation is applicable only to non-relativistic cases. As opposed to classical physics, where the wave equation can be derived from first principles, in quantum physics the wave equation is obtained by a plausibility argument based on classical physics and the de Broglie hypotheses. Inserting the de Broglie relations. A frequently …
Published in International Journal of Energetic Materials · Vol. 4, Issue 1, 2018 · pp. 17–29 Read article
-
Model of Polarization on Ferroelectric Materials upon the Influence of Electric Field
Abstract: Mathematical model was developed to monitor, predict and simulate ferroelectric materials upon the influence of electric field. The developed model was applied using different materials of ferroelectric such as BaTio3, PbTiO3, lead Zirconate, titanate (PZT), triglycine sulphate, PVDF, lithium tantalite. The results obtained revealed that the utilizing and in terms of polarization and voltage relationship either increases or decrease before increasing at the end of process to form a loop. …
Published in International Journal of Energetic Materials · Vol. 4, Issue 1, 2018 · pp. 30–39 Read article
-
Development of Epoxy Based Hybrid Composite Reinforced with Jute and Glass-fiber and Effect of Silicon Carbide additive on it’s Mechanical Properties
Abstract: In this project, an effort is made to compare the improvement of the matrix material properties because of the presence of the fillers and additives. Initially, hand lay-up process was carried out in a mold of known dimensions to layup jute fibers of varying weight percentages in the epoxy matrix. Another composite with glass fibers of similar weight percentages to that of jute were laid up in epoxy matrix in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 8–12 Read article
-
Experimental Investigation of Visco-Elastic Behavior for Ecovio F Film C2203 Biopolymer Melts
Abstract: The visco-elastic behavior of biopolymers fluid are significantly interested in their internal structure, thus, it has been experimentally investigated for various industrial applications. This paper studies the characterization of (Ecovio F Film C2203) biopolymer because of their characteristics and importance in different fields of environment and health. Two form of rheometers instruments have been used at temperatures between (140 - 220) ˚C to describe the visco-elastic behavior of (Ecovio F …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 24–33 Read article
-
MECHANICAL BEHAVIOR OF MICRO-LATTICE STRUCTURE OF BCC ARCHITECTURE IN SANDWICH CONSTRUCTION UNDER UNI-AXIAL COMPRESSIVE LOADING CONDITIONS
Abstract: ABSTRACT: Due to high energy absorption and fire resistant characteristics, the researchers have focused on micro-lattice structures. This research paper focused on applications of micro-lattice structures in the foreign object impact conditions and has high potential in the future of any structural applications, mainly aircraft structural applications. The micro-lattice structures are of body centered cubic (BCC) architectures and for modeling, the structures with four different unit cell edge lengths are …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 1–23 Read article
-
Tensile, Flexural and Impact Properties of Luffa Cylindrica and Pineapple Reinforced Polymer Matrix hybrid Composite
Abstract: Composites are emerging as realistic substitutes to the metal alloys in many applications like automobiles, marine, aerospace applications, sports goods, etc. Fiber composites offer many benefits such as low specific gravity, tensile strength and modulus, comprehensive strength, better fatigue strength, etc. Owing to the low specific gravity, the strength weight ratio and modulus weight ratio of these composite materials are markedly superior to those of metallic materials. Composites also afford …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 49–55 Read article
-
MODELLING OF SAW PARAMETERS AND ITS MECHANICAL PROPERTIES FOR JOINING STRUCTURAL STEELS
Abstract: Ethiopia nearly 85 per cent of people is morality depends on agriculture; the government of Ethiopia emphasis on Farm Mechanization for bringing the improvement in crop production using modern equipment and tools. However, the Modern equipment development needs improved machineries for fabrication. Moreover, the metal joining technology; like Submerged Arc Welding (SAW) available is very advance and made welding of thicker plats and welded structures. Therefore, while using this modern …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 34–43 Read article
-
Review on the Polymer based Microfluidic Devices for Bioengineering Applications
Abstract: In this review, few recently published research papers related to the experimental investigations are briefly summarized. The experimental observations on different effects to control the surface-driven capillary flow are mentioned related to the polymer microfluidic devices. According to the literature survey in this article, the negative photoresist SU-8 and polymethylmethacrylate (PMMA) are the two major polymers to fabricate the microfluidic devices using different conventional techniques. This review will be useful …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 44–48 Read article
-
Modern Gas Turbine System Materials - A Review
Abstract: Gas turbine systems are getting more and more importance as the requirement of electricity is increasing day by day. Out of the modern energy conversion systems gas turbines are the most efficient system. In the present work a review on the modern gas turbine systems is presented. Key Words: Gas turbine, efficiency, cost.
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 2, 2018 · pp. 15–20 Read article
-
A literature review on the implementation of Enterprise Resource Planning (ERP) system
Abstract: ERP is very important tool which is very helpful in maintaining various operations within an organization. But there are many factors which affect its effectiveness and act as barrier to in its full utilization. This paper tries to identify those factors by systematic literature analysis. The organizations may recognize these barriers in order to develop proper strategy to handle them properly. Keywords: Success factors, Barriers, Implementation, ERP
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 2, 2018 · pp. 21–24 Read article
-
A systematic literature review on adoption of Industry 4.0
Abstract: In modern scenario, technology is changing rapidly. Day by day new innovations and technologies are taking place. Now days, a new technology industry 4.0 has emerged. This new concept provides a high level of automation which leads to great ease in manufacturing. In view of this, this paper provides different viewpoints on industry 4.0. This is a big concept which generates so many issues in implementing the industry 4.0 concept …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 2, 2018 · pp. 25–29 Read article