All articles
466 articles
-
A Customized Wireless Supervisory Infrastructure for Integration and Explicit Multiparametric MPC-Based Control of Laboratory Processes
Abstract: In this study, a custom, embedded wireless (Zigbee) supervisory infrastructure aimed at integration of laboratory processes is reported. A microcontroller based field control unit (FCU) implements closed loop control on experiments via ADAM 5000/485 data acquisition module. Data from the process (sensor/manipulation) are broadcasted from FCU using a wireless access point (WAP). A MATLAB graphic user interface (GUI) updates the data (obtained using a remote monitoring unit (RMU)) graphically. Multiparametric …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 10–18 Read article
-
Induced codeposition of Ni-W alloy coatings using glycerol as additive and their characterization
Abstract: As a promising coating material to replace hard chromium coating, the development of nickel–tungsten (Ni-W) alloy coatings of good corrosion protection is of great interest in surface coating technology. Further, the effect of plating variables, including additive on the composition of alloys of induced co-deposition is more vagarious than in other types of alloy deposition. In this regard, an alkaline citrate bath has been formulated for electrodeposition of Ni-W alloy …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 1–9 Read article
-
Chromatography for Chemical Separation: Types and Uses
Abstract: Chromatography is an analytical tool that is used for separating a variety of chemical mixtures. This technique was developed somewhere during the 1940s to 1950s. Initially, the technique had low efficiency with prolonged time of analysis and reduced detection range. Later, the technique was modified and improved to meet the demands of chemical separation technology. Chromatography is broadly categorized into analytical or preparative. Analytical chromatography is used for small sample …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 1, 2016 · pp. 24–25 Read article
-
Extraction of Tannin from Psidium guajava Leaves
Abstract: Psidium guajava leaves are widely used as medicine from ancient times. Leaves are important part of guava tree which are useful in curing many health issues. Guava leaves have properties like anti-cancer, antibacterial, anti-oxidant, antiulcer etc. they are used in curing many diseases. In this article, soxhlet extraction method is discussed and yield of this method is represented. Extraction processes with different solvent such as ethanol, methanol, benzene is discussed …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 1, 2016 · pp. 19–23 Read article
-
Application of Agro-Residues for Removal of Oil Spill From Sea Surface
Abstract: Rice husk (RH), wheat straw (WS) and sawdust (SD) were studied for sorption of oil spill (diesel oil of density 0.828 g/cc was taken as oil spill for lab study) from artificially prepared sea water (3.5% NaCl) at 20, 25, 30 and 35°C at various dosages. As RH gave maximum sorption capacity at all temperatures and at all dosages under study, it was focus of investigation for its application for …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 1, 2016 · pp. 5–10 Read article
-
Magneto-electrodeposition of Sn–Ni alloy Coating for Better Corrosion Protection
Abstract: The present paper reports the development of excellent corrosion resistant Sn–Ni alloy coatings from a new pyrophosphate bath by magneto-electrodeposition (MED) approach. First part reports optimization of conditions for deposition of Sn–Ni coatings on mild steel by conventional electrodeposition (ED) method and their characterization. The second part demonstrates how the corrosion resistance of Sn–Ni alloy coatings can be improved drastically by MED method, using same bath. Significant decrease of corrosion …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 1, 2016 · pp. 29–42 Read article
-
Influence of CeO2 nanoparticles on the corrosion behavior of electrodeposited Ni coatings
Abstract: Nickel-Ceria (Ni-CeO2) nanocomposite coatings were developed on mild steel (MS) substrate using electrodeposition method. The codeposition of the nanoparticles was achieved from the optimized Ni plating bath loaded with CeO2 nanoparticles (particle size <20 nm). Ni and Ni-CeO2 coatings were achieved at a wide current density (c.d.) range from 1.0 to 5.0 A/dm2 under optimal conditions, and their corrosion protection efficacy was examined in 5% NaCl medium. The material property …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 1, 2016 · pp. 19–28 Read article
-
Sapota Seed Oil
Abstract: The objective of this work was to extract and determine the chemical composition of oil obtained from sapota seed fruits that are grown in India and characterize it. The sapota seed oil was extracted from kernel using different solvents viz., (a) carbon tetra chloride, (b) n-hexane and (c) toluene for eight extractions or stages. Nearly, 20–23% of oil yield was obtained. The oil has acid value – 4.11 to 9.5, …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 1, 2016 · pp. 15–18 Read article
-
Career and Employability Skills of Diploma Chemical Engineers
Abstract: Today, Chemical Engineering is need of human survival. From morning to night, people used different products which are generally made up of different chemicals. From medicines to fuels, tremendous needs of chemical products are increasingly, which are useful in human life. Chemical Engineering was initiated with the aim to transform raw materials into some beneficial products using chemical reactions. Chemical engineers use the principles of engineering analysis and knowledge of …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 1, 2016 · pp. 11–14 Read article
-
Optimization of Reaction Parameters for the Production of Fatty Acids from Rice Bran Oil
Abstract: Fatty acids are usually produced industrially by the hydrolysis of triglycerides and glycerol as by product. In this reaction, 1 molecule of fat/oil will react with 3 molecules of water. The hydrolysis can be done by with and without catalyst. The catalyst process has some inherent problems. To get better quality of fatty acids and high yield the most of the industries preferring the hydrolysis without catalyst. The present study …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 1, 2016 · pp. 1–4 Read article
-
Electrolytic Degradation of Uric Acid Using Nickel Electrodes in an Unpartitioned and Partitioned Batch Cell
Abstract: Electrolytic degradation of an aqueous solution of uric acid (UA) was performed in an unpartitioned and partitioned electrolytic tank using nickel electrodes. The concentration of uric acid was measured using a UV–Visible spectrophotometer, and the effect of operating parameters such as voltage, concentration of uric acid and the supporting electrolyte were investigated. It is found that the concentration of uric acid decreases with time in both the unpartitioned and partitioned …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 1, 2016 · pp. 1–10 Read article
-
Indian Scenario of Agrochemical Industry: An Overview
Abstract: The world’s population is estimated to grow from 6.8 billion today to >9.0 billion by 2050. Global demand for food is expected to double by then as per UN projections and estimate. In India, agriculture is the mainstay of rural economy and supports over 2/3rd of the country's population. The agrochemicals industry is a significant sector for the Indian economy. The Indian agrochemicals market grew at a rate of 11% …
Published in International Journal of Agrochemistry · Vol. 1, Issue 2, 2015 · pp. 1–7 Read article
-
Comparative Study of Molecular Interactions in Binary Liquid Mixtures of 4-Methyl-2-Pentanone with Aniline, N, N-Dimethyl Aniline and Chlorobenzene at 308 K
Abstract: The ultrasonic velocity (u), density (ρ) and viscosity (η) have been restrained for binary mixtures of 4-methyl-2-pentanone with butan-2-one, cyclohexanone and furfuraldehyde at temperature T=308K at changed mole fractions. The experimental data have been used to calculate the acoustical and thermo-dynamical parameters like adiabatic compressibility (βad), free length (Lf), free volume (Vf), internal pressure (πi), acoustical impedance, Gibb’s free energy and their excess volumes in particular, it is seen that …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 2, 2015 · pp. 19–29 Read article
-
Studies on mass transfer in annular conduits with coaxially placed entry region vane assembly as turbulence promoter in homogeneous flow
Abstract: Studies on mass transfer in annular conduits with coaxially placed entry region vane assemblies as turbulence promoter in homogeneous flow were presented in this paper. The electrolytes used were equimolal potassium ferricyanide, potassium ferrocyanide and excess sodium hydroxide. Limiting current data had been obtained for the reduction of potassium ferricyanide ion. The mass transfer correlation is based on law of the wall similarity. The variables covered in this study are …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 2, 2015 · pp. 7–18 Read article
-
Statistical and Artificial Neural Network for the Determination of Thermo-Physical Properties of Fomoditine Drug Using Mixed Hydrotropy
Abstract: The experimental determination of thermo-physical properties of fomoditine drug–mixed hydrotrope concentration mixture is very time consuming as well as tedious process. Any tool helpful in estimation of these properties without experimentation can be of immense utility. In present work, other tools of determination of properties of fomoditine drug–mixed hydrotrope concentration blends were tried. A traditional statistical technique of linear regression (principle of least squares) was used to estimate the specific …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 2, 2015 · pp. 1–6 Read article
-
Solubility Enhancement of Theophylline Drug Using Mixed Solvency Approach
Abstract: “Solubility enhancement” is one of the difficult tasks that have become a great challenge in formulation development of orally administered drugs having poor aqueous solubility. Poor aqueous solubility of drugs creates significant problems in producing formulations of sufficiently high bioavailability, thereby preventing the effective usage of these drugs. With the introduction of the concept of “mixed-solvency,” it is feasible to increase the solubility of poorly water-soluble drugs in aqueous solutions …
Published in International Journal of Chemical Separation Technology · Vol. 1, Issue 2, 2015 · pp. 1–4 Read article
-
Efficacy of Insecticides Cypermethrin and Fenvalerate on Gossypol Content in Gossypium Sp.
Abstract: Cotton crop is highly susceptible to several pests. About 166 different species of insect pests are reported to attack cotton at various stages of its growth. Because insecticides has been recognized universally as easy, convenient and effective pest control options, farmers are enthusiastically using them to reap good benefits. Two varieties of Gossypium hirsutum – Surabhi and Saubhagya were selected and grown in pot. Few plants were treated with insecticides …
Published in International Journal of Agrochemistry · Vol. 1, Issue 1, 2015 · pp. 23–30 Read article
-
Health Allegation of Unnecessary Use and Misuse of Pesticides by the Rural People: The Necessity for Alertness
Abstract: Pesticides are chemicals basically required for food safety and health intention, adding that most of the time; they are being mistakenly applied and mistreated mainly by the rural occupiers in developing countries. The health allegation of abuse and mishandling of pesticides were assessed and ways forward suggested. This review will provide the payback of pesticide use, knowledge of the risks caused to people, wildlife and ecosystems. The paper looks into …
Published in International Journal of Agrochemistry · Vol. 1, Issue 1, 2015 · pp. 16–22 Read article
-
Botanicals Insecticides – A Source of Weapons against Pests and Insects of Plants
Abstract: In agricultural crop production, the synthetic pesticides and insecticides are used which has got occasionally carcinogenic and residual toxic effects. The disproportionate use of it also causes severe health risks to human life, livestocks, fishes, birds, wild life and animals. Therefore, there is an immediate requirement for unconventional nontoxic pesticides. The tropical plants are natural rich source of phytochemicals having antimicrobial and biological properties. Green plants are natural biochemical factories. …
Published in International Journal of Agrochemistry · Vol. 1, Issue 1, 2015 · pp. 10–15 Read article
-
Endosulfan: A Noxious Agrochemical for the Health of Human Beings
Abstract: Endosulfan, an organochlorine pesticide, is a broad spectrum contact insecticide widely used in pest control. It is used in a wide range of crops including cereals, coffee, cotton, fruit, oil seeds, potato, tea and vegetables. There is a global concern over the acute toxicity of endosulfan. This article will make us understand the accurate meaning of Endosulfan (insecticide) and also why it is harmful for the health of human beings. …
Published in International Journal of Agrochemistry · Vol. 1, Issue 1, 2015 · pp. 6–9 Read article