All articles
466 articles
-
Comparative analysis of low and high pressure water electrolysis using nuclear waste heat for sustainable hydrogen production in India
Abstract: Hydrogen has been proposed as a clean and sustainable vector of the decarbonized energy system of the near future. Generation of hydrogen gas from a relatively easily available resource like water through low temperature water electrolysis is a simple, technologically mature alternative for realizing the vision of hydrogen economy. This work examines the techno-economic feasibility aspects of a water electrolysis based hydrogen production plant when coupled with typical nuclear power …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 1, 2018 · pp. 1–20 Read article
-
A PARAMETRIC ANALYSIS OF AMBIENT TEMPERATURE ON FLAT AND CURVED SURFACE OF A PV CELL
Abstract: This work focused on investigating and controlling the effect of ambient temperature on the surface temperature of a PV module. An experimental approach is carried out to provide ventilation on the surface of the PV panel with the help of a blower. With the increase in solar irradiance, the panel temperature also increases so experiment is conducted for different velocities of the air with the help of a blower to …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 1, 2018 · pp. 39–48 Read article
-
Effect of Different Parameters On Underground Water Quality in Summer Season of Rewa City M.P. (India)
Abstract: In this research paper we are analyzed to Effect of different parameters on underground water quality in summer season of Rewa city M.P. (India). Qualitative analysis of underground water of Rewa city, Madhya Pradesh, India during the month between april -june in the year of 2017. All the water samples are within prescribed limits as suggested by BIS 10500:2012 desirable limit for drinking purpose. Seasonal variation in physical and chemical …
Published in International Journal of Agrochemistry · Vol. 4, Issue 1, 2018 · pp. 23–30 Read article
-
Basics of anti-erosion protection of cultivated soils of mountain and Foothill areas of Azerbaijan
Abstract: Abstract : The article deals with the problem of protection of soil from erosion soil erosion Problems. There is an urgent task of national importance, a decision that deepens year by year. Admittedly, it is associated with both the knowledge of the outstanding role of the soil in the life of the biosphere, and recognizing that allowing 43.3% of the whole territory of Azerbaijan have experienced any type of erosion. …
Published in International Journal of Agrochemistry · Vol. 4, Issue 1, 2018 · pp. 15–22 Read article
-
Comparative efficacy of insecticides and plant extracts to manage Bemisia tabaci (Genn.) and tomato leaf curl virus disease
Abstract: Tomato (Lycopersiconesculentum) is most important vegetable crop of Pakistan. It is attacked by many biotic and abiotic diseases. Among the viral disease tomato leaf curl virus disease (TLCVD) is most important disease that causes heavy yield losses. Under natural field conditions, TLCVD is transmitted by Bemisia tabaci. Comparative efficacy of insecticides and plant extracts to manage Bemisia tabaci (Genn.) and tomato leaf curl virus disease was studied under natural field …
Published in International Journal of Agrochemistry · Vol. 4, Issue 1, 2018 · pp. 7–14 Read article
-
Comparative Study of Corrosion Inhibition In Carbon Steel Using Non Ionic Surfactants In Acidic Medium
Abstract: The use of surfactants is one of the numerous ways of protecting a metallic surface from electrochemical oxidation or corrosion. The amphiphilic nature of these surfactants leads to the formation of a protective layer on the metallic surface, effectively minimizing the area of contact between the fluids and the metal, thus inhibiting corrosion. Cationic surfactant like CTAB (Cetyltrimethylammonium bromide) has been most commonly used as a corrosion inhibitor, but since …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 1, 2018 · pp. 21–29 Read article
-
Passive Capillary Flow of Dyed Aqueous Isopropyl Alcohol in the Leakage-Free SU-8 based Glass Microfluidic Devices
Abstract: In this work, total 2 individual SU-8 based glass microfluidic devices are fabricated by the maskless lithography and indirect bonding technique. The aqueous isopropyl alcohol (10% IPA, 90% dyed water) is prepared to test these fabricated devices. Each passive capillary flow is recorded by the CMOS camera catching 25 frames per second. This work will be useful in bioengineering applications. Keywords: Passive capillary flow, SU-8, Aqueous IPA, Microfluidic device
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 1, 2018 · pp. 30–32 Read article
-
Extractive Distillation study for the system Acetone - Chloroform – DMSO
Abstract: Acetone- chloroform is a maximum boiling azeotropic mixture which is frequently observed in the pharmaceutical and specialty chemicals industries. Conventional distillation does not yield the desired separation into pure components that is Acetone and Chloroform. Present work, focuses on separation of mixture by Extractive Distillation (ED) using PRO/II simulation software. Solvent used in separation of the mixture is DMSO (Di Methyl Sulfoxide) and thermodynamic model UNIFAC is selected for the …
Published in International Journal of Chemical Separation Technology · Vol. 4, Issue 1, 2018 · pp. 1–12 Read article
-
MANUFACTURING PROCESS FOR INDUSTRIAL RESIN (PHENOL FORMALDEHYDE, MELAMINE FORMALDEHYDE AND UREA FORMALDEHYDE)
Abstract: Resins manufacturing plants designed technically based on high-yield reactors and a fine process control system. The paints and coatings segment is the largest application. The resin plants are basically used for the production of a wide range of solvent-based and water-based emulsion or resin. Here, we have presented the manufacturing process along with the mass balance of three important industrial resins i.e. Phenol Formaldehyde, Melamine Formaldehyde and Urea Formaldehyde. Keywords: …
Published in International Journal of Agrochemistry · Vol. 4, Issue 1, 2018 · pp. 1–6 Read article
-
Micromechanical Analysis of Compaction and Drilling of Granular Media- A Review
Abstract: Granular matter is ubiquitous in our daily life yet far from completely understood. These granular materials have constituted a class of complex systems which exhibit global behaviors been reminiscent of solids, liquids, gases, or otherwise uniquely their own. The key to achieve good properties lies in the material structure from the molecules, via structures on nano- and micro levels to the macroscopic material. This paper also reviewed selected approaches and …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 2, 2017 · pp. 1–6 Read article
-
Catalytic hydrogenation of dimethyl-nitrobenzene to dimethyl-aniline over Ni catalysts
Abstract: The catalytic transfer hydrogenation of dimethyl-nitrobenzene (DN) to Dimethyl-aniline (DA) was studied in the temperature range 343–403 , pressure range of 4–10 bar H2 and ethanol as solvent using Ni on alumina-silicate as catalyst above agitation speed 800 rpm. The substrate feed concentration was varied in the range from 0.124 to 0.745 kmol/m3 while catalyst loading was in the range 4–12% (w/w) of dimethyl-nitrobenzene. Dimethyl-aniline was the only reaction product, …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 2, 2017 · pp. 19–29 Read article
-
Application of Taguchi Method for Optimization of Reaction Parameters in Graft Copolymerization onto Guar Gum
Abstract: In this article, Taguchi method is used to theoretically optimize the various reaction parameters and their interactions that may affect the end properties of Guar Gum Grafted copolymers made in a laboratory glass reactor. An attempt has been made to assess and predict the effect of temperature, monomer (Acrylonitrile) concentration and Guar Gum concentration on % grafting. In the present study effect of above mentioned three reaction parameters on the …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 2, 2017 · pp. 12–18 Read article
-
A Review on Glucose Sensor
Abstract: The estimation of blood glucose levels is done utilizing different glucose biosensors for the screening, conclusion, and long term administration of patients with diabetes. Amperometric biosensors work by the creation of a present when a potential is connected between two terminals. At the point when a capability of - 0.6 V, with respect to the Ag/AgCl anode is connected to the platinum cathode, a present relative to the oxygen focus …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 2, 2017 · pp. 7–11 Read article
-
Phytoalexins and their Significant Role in the Plant Resistance Management
Abstract: Phytoalexins are antibiotic compounds synthesized in an infected plant in reply to infection. Nematodes are capable of eliciting phytoalexins in resistant plants. Phytoalexins are antibiotic compounds synthesized in an infected plant in response to infection. Nematodes are capable of eliciting phytoalexins in resistant plants. Resistant lima bean (Phaseolus lunatus) infected by Pratylenchus penetrans produces the phytoalexin coumestrol; soybean (Glycine max) infected by Meloidogyne incognita produces glyceollin; cotton (Gossypium hirsuturn) infected …
Published in International Journal of Agrochemistry · Vol. 3, Issue 2, 2017 · pp. 18–24 Read article
-
A Review on Potential use of Bioherbicides for preventing the growth of weed plants
Abstract: Like pests, disease and other hazards weeds are one of the major problems for farmers. They not only compete with crops for water, nutrients, sunlight, and space but also harbor insect and disease pests, clog irrigation and drainage systems undermine crop quality and deposit weed seeds into crop harvests. They can heavily damage the production of crops as well as they reduce the value of land. Weeds can also host …
Published in International Journal of Agrochemistry · Vol. 3, Issue 2, 2017 · pp. 10–13 Read article
-
Zinc -The Miracle Nutrient of Agricultural Crop Production
Abstract: Zinc is involved in most plant growth functions. Zinc helps produce auxins. Zinc is a growth promoting substance that controls the development of the shoot. Zinc also forms enzyme systems, which regulate plant life. Yet zinc is the most common micronutrient deficiency in agriculture today! Zinc deficiency can limit yields of corn, beans, wheat, cotton, sorghum, fruits, and vegetables. Yet, without this essential ounce of zinc no crop would grow …
Published in International Journal of Agrochemistry · Vol. 3, Issue 2, 2017 · pp. 14–17 Read article
-
INDUCEMENT OF PGR INTO SEED TO ENHANCE NATURAL GROWTH
Abstract: The first genetic modified crop plant was produced in 1982, an antibiotic resistant tobacco plant. GM crops are the need of hour where our world faces highly disastrous climate change and whooping malnutrition among people. Still 1.2 billion people in which large part of infancy & adolescences facing mass malnutrition. According to numbers from world food programme approximately 790 million people don’t have enough food to live healthy life. Appreciate …
Published in International Journal of Agrochemistry · Vol. 3, Issue 2, 2017 · pp. 1–4 Read article
-
Studies of Insecticide Fenvalerate on Growth parameters and production of Gossypium hirsutum L.
Abstract: Cotton is the most important cash crop. Cotton constitutes more than 70% of the total world consumption of fibres. Cotton is reported to be a host for about 166 different species of insect pests throughout its growth cycle. The major pests of cotton are causing considerable economic losses to the crop production. The cotton farmers incur heavy losses on the crop due to these factors. Saubhagya variety of Gossypium hirsutum …
Published in International Journal of Agrochemistry · Vol. 3, Issue 2, 2017 · pp. 5–9 Read article
-
A Review Status on Application of Separation Techniques in Daily Life
Abstract: In chemistry and related fields, a unit operation is the basic step in a process. Unit operations involve a physical change or chemical transformation such as separation, crystallization, evaporation, filtration, polymerization, isomerization, and other reactions. Researchers have developed economic ways of using materials and energy. Chemical engineers use chemistry and engineering to turn raw materials into usable products, such as medicine, petrochemicals and plastics on a large-scale industrial setting. They …
Published in International Journal of Chemical Separation Technology · Vol. 3, Issue 2, 2017 · pp. 30–35 Read article
-
Hydrogenation of dimethyl-nitrobenzene to dimethyl-aniline in a three-phase Reactor
Abstract: The liquid-phase catalytic hydrogenation of dimethyl-nitrobenzene (DN) to Dimethyl-aniline (DA) was carried out in ethanol using 5% Pd/C as a catalyst. The effects of hydrogen partial pressure (400–1000 kPa), reaction temperature (343–403 ), catalyst loading (5–15 g/lit), speed of stirring range (200-800 rpm) and dimethyl-nitrobenzene concentration (0.12–0.75 mol/lit) on the hydrogenation of dimethyl-nitrobenzene and the yield of Dimethyl-aniline have been studied. Dimethyl-aniline was the only reaction product, generated through the …
Published in International Journal of Chemical Separation Technology · Vol. 3, Issue 2, 2017 · pp. 1–13 Read article