International Journal of Polymer Science and Engineering
Volume 6, Issue 1 (2020)
Published
Table of contents
-
Low temperature plasma treatment of polymeric membranes: a comparative review
Abstract: This paper presents a comparative study of plasma surface modification of various polymeric membranes. Low temperature plasma treatment using pulsed direct current discharge of different gases was employed to enhance hydrophilicity of membranes. Radio frequency discharge of various gases was used to improve surface properties of different polymeric membranes. The enhancement of hydrophilicity of the plasma modified membrane surface was evaluated by measuring the contact angle. The membranes were characterized …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 1–19 Read article
-
Synthesis of Biodegradable Nano Composite of PMMA vinyl Polymer with Corn Cob
Abstract: Vinyl polymers are the largest category of polymers which have wide applications. PMMA is important vinyl polymer which when modified with with Corn Cob(agricultural waste) for nanocomposite formation, then it may result biodegradable modified polymer. Corn cobs (focal piece of maize) are either treated as waste or consumed as fuel causing ecological concern. So as to accomplish its worth option in new research regions, corn cob can be prepared synthetically …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 20–24 Read article
-
Corrosion Studies of Al 7075 alloy using Cetirizine drug as drug in Arabian Sea water sample
Abstract: The inhibition of Cetirizine drug on corrosion of Al 7075alloy in Arabian Sea water medium became investigated by way of weight reduction measurement, Tafel Polarization, and EIS techniques. The electrochemical outputs proved that the prepared Drug act as powerful corrosion drug. The outputs found from electrochemical, weight loss and EIS studies showed exact consistency. The Present paper involves examine of weight loss, Tafel polarization, EIS and microstructural behavior of Al …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 25–31 Read article
-
Evaluation of Response Characteristics of Distillation Column
Abstract: In this paper mathematical model was developed to monitor, predict and control the effectiveness of the controller designed with the principle of various responses. The result obtain in the investigation demonstrate the usefulness of input, ramp, and impulse response in monitoring, predicting and controlling the separation of the distillate product from the reflux for effective performance evaluation of the distillation column. The model evaluated the impact of feed tray, reboiler …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 32–43 Read article
-
Experimental Studies on the Surface-Driven Microfluidic Flow of Dyed Working Liquids in Sudden Expansion Microchannels Fabricated by Polymer
Abstract: In this experimental work, the sudden expansion microchannels are fabricated by maskless lithography, hot embossing lithography, drilling, direct bonding technique and chip separation technique using own hands-on of author completely. Total 15 individual sudden expansion microchannels are fabricated in this work using polymethylmethacrylate (PMMA) as optically transparent polymer. Effects of channel aspect ratio, surface wettability and liquid viscosity on surface-driven microfluidic flow are experimentally studied in the fabricated sudden expansion …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 44–59 Read article