International Journal of Microwave Engineering and Technology
Volume 4, Issue 2 (2018)
Published
Table of contents
-
Dual Substrate Shorted Microstrip Patch Antenna for Bandwidth Enhancement and RF Energy Harvesting Application
Abstract: ABSTRACT In this study, a dual substrate shorted microstrip patch antenna is designed for RF Energy Harvesting Application. The proposed antenna covers signals between 2200-2300 MHz frequencies, area of the proposed antenna is compact. The proposed dual substrate patch antenna is loaded on FR-4 lossy substrate with thickness of 1.6 mm. The defected ground structure with square slots and increasing the height of the substrate are used for increasing the …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 2, 2018 · pp. 1–5 Read article
-
A Wideband 3dB Hybrid Coupler for Operations in the C-band
Abstract: This study proposes and describes a novel wideband 3 dB directional coupler operating in the C-band (4–8 GHz). The proposed design was developed using microstrip technology with alumina being used as the dielectric, with a bandwidth of approximately 7 GHz (2–9 GHz), making it in theory, suitable for applications in the X-band (8–12 GHz) and L-band (1–2 GHz) as well. The increase in operational bandwidth was obtained by utilizing two …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 2, 2018 · pp. 15–18 Read article
-
Design, Fabrication and Analyses of Rectangular Microstrip Inset Feed Patch Antenna at 2.4 GHz
Abstract: Low profile antenna supports the activity of numerous modernized communication systems. Microstrip patch antenna represents a group of antenna which offers the capability of complete assimilation with communication system printed circuitry. We have been devised, fabricated a rectangular microstrip patch antenna and analyzed at the frequency of 2.4 GHz. By means of transmission line model it has been effectively demonstrated as to how the patch antenna can accurately modelled and …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 2, 2018 · pp. 19–26 Read article
-
Wearable Textile Antenna for Body Centric Wireless Application
Abstract: This article introduces minimal effort wearable textile antenna with the absconded ground is proposed. The foreseen antenna can get the recurrence between 2.185 and 6.625 GHz. An examination between the measured result and the estimated result has been considered in this article. The foreseen wearable antenna is appropriate to get radio wave vitality accessible in the range of 2.185–6.625 GHz. Keywords: copper tape, flexible antenna and CST software, jeans substrate, …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 2, 2018 · pp. 27–32 Read article
-
Quad-Band L-Shaped Slots Integrated Microstrip Patch Antenna for Radio Frequency Energy Harvesting Applications
Abstract: This study presents an L-shaped slots integrated Microstrip antenna for Radio frequency (RF) energy harvesting applications. It is designed on FR-4 Epoxy substrate material with the coverage of four bands (GSM-900, GSM-1800 Wi-Fi sources 2400, and 3300MHz frequency band allocated for WiMAX applications) of cellular communication. The proposed L-shaped slots antenna consists of four symmetric/asymmetric stubs and four symmetric L-shaped slots. L-shaped slots are integrated inside a square patch of …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 2, 2018 · pp. 6–14 Read article