International Journal of Concrete Technology
Volume 4, Issue 2 (2018)
Published
Table of contents
-
Review Study on re-strengthening of reinforced concrete circular column using steel strips
Abstract: This technique fixes thin steel plates i.e. steel encasement or tie plates i.e. steel cage around the column with steel angles at each corner, clamped to the concrete and welded together. Adequate tightening of the jackets can be ensured by means of heat tensioning. The use of steel jackets can enhance the shear strength of columns considerably. However, due to their low flexural stiffness they typically have poor confinement efficiency …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 1–9 Read article
-
Experimental Investigation On Partial Replacement Of Fine Aggregate By Wood Ash On Concrete
Abstract: This paper intends to investigate the possibility of producing low costs enhanced performance concrete by wood ash. By taking the enormous amount of sand in river beds, it affects the environment badly and demand for fine aggregate is increase day by day. So by partially replacing Prosopis juliflora ash with fine aggregate in construction field, It can serve both the purposes of meeting the demands of construction industry and at …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 10–16 Read article
-
A STUDY ON PRODUCTION OF NEXT GENERATION CONCRETE : GREEN CONCRETE
Abstract: This proposal aims to study the production of eco friendly, sustainable and efficient self healing concrete. Concrete is the most widely used material in construction, concrete is a composite material composed of course aggregates bonded with wet cements which hardens over time. Production of bioconcrete is done in order to reduce the cracks, reduces the corrosion of steel present inside the building. Modern methods of construction and technology have taken …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 17–20 Read article
-
A parametric study for the behaviour of steel plate-anchor assembly embedded in concrete under cyclic loading
Abstract: Steel plate-anchor assembly embedded in concrete is a common type of connection system used for connecting structural steel members to concrete members. These assemblies are subjected to different loading cases depending on their use. Since the behaviour of such assemblies is quite complex and depends on a number of factors associated with different components, it was decided to adopt finite-element technique to obtain a reasonably accurate analytical solution for the …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 21–36 Read article
-
Aerocon Bricks
Abstract: Various low-cost housing projects are considered by a growing demand chiefly due to urbanisation. The collection of building materials should chance the requirements of local conditions to enhance quality of life for the most needed ones by building new structures and/or by improving existing structures. Various studies showed that a big variety of wall materials have been used in different building systems with traditional and modern construction methods, but only …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 37–48 Read article